Fab tutorial as always! Love the necklace the most I think!

@RedRockingBird

Жыл бұрын

😊😉 I’ve seen you wearing something similar I think??? 🤔

@Studio7t7

Жыл бұрын

@@RedRockingBird you have 😁🤩😝

Thanks, another great informative video, loved the 🦊😁

@RedRockingBird

2 жыл бұрын

Thank you, yes I’ll be making more of those 🦊😊

Great as always

@RedRockingBird

11 ай бұрын

Thank you

Thank you! This was a very helpful video

@RedRockingBird

Жыл бұрын

Thank I’m happy to hear you think so ❤️

i really liked the way you explains to-the-point with beautiful voice. i have already subscribed you. hope to have more ideas from you

@RedRockingBird

Жыл бұрын

Thank you, that’s lovely to hear, more videos coming soon 😊

Aren't you beautiful! Your voice is so gentle and tips really useful. Am now feeling much more confident I can do this.

@RedRockingBird

Жыл бұрын

Wonderful, yes you can do this, give it a try and see what happens 😊

Brilliant video, well presented.

@RedRockingBird

Жыл бұрын

Thank you kindly

@RedRockingBird

Жыл бұрын

this is my laser printer version: kzread.info/dash/bejne/ZoJ9tpuYYcibiZc.html thank you ..... replied in wrong place .....

Great video

@RedRockingBird

Жыл бұрын

Thanks for watching

Hi Sarah, great video. The laser cutter that you are using in this video is using a “diode” as the means to produce the laser beam. Due to way the diode produces the laser beam it will not work at all on clear acrylic or white acrylic as you have seen in your testing. If you were to use a co2 laser it would work perfectly on both clear and white acrylic. Other than that I think you did a great job at producing clean cuts and I like the designs you made. Nice idea making test pieces to keep for future use!

@RedRockingBird

2 жыл бұрын

Hi, Thank you so much, everyone reading this I thoroughly recommend The Plastic people for your acrylic supplies. Thank you for this useful information, looks like I must get a Glowforge 😍 Looking forward to seeing what else I can create from acrylic. Sarah

@almoccia9282

11 ай бұрын

If you paint clear or white with a black tempra paint first, it will cut with a diode. Tempra paints are water based and will wash off with water after the cutting operation.

@n.r.4269

6 ай бұрын

Not working ​@@almoccia9282

Interesting idea for a small business. Is the native software difficult to learn? You said Adobe Illustrator but I don't have that, would Inkscape or another open source vector graphics software be usable in your machine? Great tutorial. TFS!!

@RedRockingBird

2 жыл бұрын

If you can get or create an svg file you can import this into the free software, the free software is very basic but alongside a vector software it’s great. Light burn is most often used and can all be done in one place but I currently don’t have this so I wanted to show using a laser without this. Thank you 😊

COOL

@RedRockingBird

2 жыл бұрын

Thanks, lots more inspiration coming soon 👍

Thanks for the video Sarah! I have a question on the LaserPecker 2. Have you tried to engrave on transparent acrylic? If so, could you show the outcome?

@RedRockingBird

Жыл бұрын

Thanks, on this one no success yet

Have you ever tried cutting and engraving kirinite scales? They're about 10 quid for 2 scales of 1/4 inch thickness so not very cheap. Just really wondering if it's possible to have 2 slabs of it and make a USB stick case by engraving it inside to fit

@RedRockingBird

2 жыл бұрын

Hi, I have no experience with kirinite scales sorry

Thank you for this video, I started with Blue, didn’t see this video until after the fact. It didn’t cut no matter the setting. I have the XTool d1 pro 10w. My challenge is finding a good company to buy acrylic from here in the US. XTool is out of the popular colors.

@RedRockingBird

2 ай бұрын

Glad it was helpful, Google search and you should find plenty of options

What is a good inexpensive desktop laser cutter for cutting/drilling Plexiglas/acrylic sheet? Mike in LA, Calif, USA

@RedRockingBird

Жыл бұрын

i like the xTool series

Thank you for this video! I also just got an XTool but cannot figure out the settings for acrylic 😑 Would you mind sharing your settings for cutting acrylic?

@RedRockingBird

Жыл бұрын

Wonderful, I hope you enjoy it as much as I do. As in the video some acrylic sheet did not cut, and not the clear. I set mine on 100% power 2 speed then test between 2 and 4 passes. Try it and see how you get on, let me know how it goes, thanks 😊

@maryknelsen2259

Жыл бұрын

@@RedRockingBird thank you!! I switched out my acrylic and set it to 2/100 x 4 and it cut beautifully!!

@RedRockingBird

Жыл бұрын

@@maryknelsen2259 amazing, I’m so glad, full steam ahead with your creating now 😁

Nice and Creative. Which software you used for this?

@RedRockingBird

Жыл бұрын

Thank you. The free software LaserBox

Hi I have a question about what are the settings for cutting acrylic and plexiglass. I use lightburn. Thanks

@RedRockingBird

Жыл бұрын

All acrylics are slightly different depending on colour and density, I tend to test at 100% and 4 passes

Hi its nice . Can you please let me know which free software you are using for laser cutting .

@RedRockingBird

Ай бұрын

Hi, Laser GRBL is free and good for getting started, thanks, happy lasering

Can the laser pecker 2 cut acrylic? I noticed you were using the XTool to do the cutting. Thanks great video!

@RedRockingBird

Жыл бұрын

Take a look at this video of mine: LaserPecker 2 - Cutting on this Laser Engraver YES I did

@sparkydoodles4440

Жыл бұрын

Thanks!!!😊

@RedRockingBird

Жыл бұрын

@@sparkydoodles4440 hopefully you found it, sorry I don’t have the link on my mobile, hope you find it useful, merry Christmas 🎄

Hi, I'm looking for buying my first laser cutter. The Xtool D1 can cut colors acrylic? I want one for make jewelry like you show us in this video. Thank you

@RedRockingBird

Жыл бұрын

Yes you can, it takes a bit of practice as shown in the video to get the settings just as you want them, but when you do it's great store.xtool.com/collections/laserbox/products/portable-diode-laserbox-d1-for-laser-engraving-laser-cutting?ref=zZ1xJxidcQmE7h Thanks

@yalelixvega3403

Жыл бұрын

@@RedRockingBird thanks a lot

Hello, can you tell me how can I cut the transparent acrylic ? speed and power for S9 laser ?

@RedRockingBird

7 ай бұрын

Hi www.xtool.com/products/xtool-p2-55w-co2-laser-cutter?ref=zZ1xJxidcQmE7h& you need a more powerful laser like this for clear acrylic, works like a dream

Hi Sarah! A very useful video for beginners. I have a request, what software do you use in the video. It seems very intuitive. Thank you.

@RedRockingBird

Жыл бұрын

Hi, thank you. I used adobe illustrator to create designs and then light box, I found it intuitive too, best of luck for your projects 😊

Enjoyed your video! Please let me know what problems you've had with your x-tool.

@RedRockingBird

Жыл бұрын

Great thank you, I’ve not had any problems with the D1

Does it cut gold acrylic at all? Have you tried this? Please let me know.

@RedRockingBird

Жыл бұрын

I don't have any gold acrylic so never tried but i would like to think so

Which software you used

@RedRockingBird

Жыл бұрын

The free software light box, but you can use light burn

Any chance I can ask a question regarding the tool through email or social media? 🥺 not sure if it’s a question anyone asks or even answer but I need help

@RedRockingBird

Жыл бұрын

Please ask!

Can this be cut in laser box

@RedRockingBird

Жыл бұрын

I’m using laserbox basic yes

How thick is the acrylic

@RedRockingBird

8 ай бұрын

I think 4mm

Do you sell them xx

@RedRockingBird

2 жыл бұрын

I’m thinking about adding some to my Etsy shop, thanks

You sound like your from England 🏴󠁧󠁢󠁥󠁮󠁧󠁿

@RedRockingBird

2 жыл бұрын

That’s because I sure am 😉❤️

@CreatureCribs

2 жыл бұрын

@@RedRockingBird me too 😏

@CreatureCribs

2 жыл бұрын

@@RedRockingBird where did you purchase your d1 ?

Great video, as always. Could you put a warning at the start of the video about the flashing lights though. I could handle them in some shots but not in others. Thanks so much.

@RedRockingBird

2 жыл бұрын

Sorry about this, I tried not to add too much of the actual lasering in, will do in future thanks

@cblaney3931

2 жыл бұрын

@@RedRockingBird Thank you. Totally understand that it's hard to get the balance right. :)

@RedRockingBird

2 жыл бұрын

Thank you for your understanding, have a great day 😊

Hi

@RedRockingBird

Жыл бұрын

hello! thanks for watching

@sajjadali-tf1sg

Жыл бұрын

I wanna some information. Can I have a contact with you

She doesn't show us everything

@RedRockingBird

5 ай бұрын

She doesn’t want to bore you for 4 hours 😂