Thank you talented and gentle human being✨👏🏼 Hope you thrive infinitely🎇

Made the fixed one the other day. Thanks for the idea. Keep bringing more diy hacks.

@CornerfieldShop

3 жыл бұрын

Nice! I will try to come up with more 😉✌️

Nice job RIco! I love that patterned plywood :)

@CornerfieldShop

4 жыл бұрын

Thanks Miles! Appreciate it 😄👍

Good job! I like the adjustable the most. Keep up the good work

@CornerfieldShop

4 жыл бұрын

Thanks! 😄👍

This was extremely useful. I was looking for a simple and effective solution for my custom mate iPad drawing board 😊

That was awesome! Loved your use of the table saw. Peace!

@CornerfieldShop

3 жыл бұрын

Thanks! ✌️

good design, building myself one now. Using the first design as reference simple but functional.

@CornerfieldShop

3 жыл бұрын

Nice! Thanks for leaving a comment 🙂

This is very helpful.. thank you for this video. I love how simple the design :)

@CornerfieldShop

2 жыл бұрын

Thanks for the comment Diane! You're welcome 😊

I just finished the 1st design with a slightly thinner plywood .. it turned out awesome, thank you for the video.

@CornerfieldShop

3 жыл бұрын

Great to hear! Thanks for your comment 😄

@kksahu-uw4cp

2 жыл бұрын

Q

Thank you so much! Going to try at least one of these!!!

@CornerfieldShop

2 жыл бұрын

Nice!

simple yet so creative 👍🔥

@CornerfieldShop

3 жыл бұрын

Thank you!

I had to comment to say thank you for starting the video by showing each of the three versions. Many similar videos don’t show the finished products forcing a scrub search. Your consideration is appreciated, thank you.

@CornerfieldShop

2 жыл бұрын

Thanks for that Edward! :-)

Simple but creative love your works 🤩

@CornerfieldShop

3 жыл бұрын

Thank you Teshan 😊

@TeshanMatthew

3 жыл бұрын

@@CornerfieldShop i'm gonna stay in touch with your channel 🤩

Thanks. Thoose are some great designs everyone can repeat. I will probably try one of thoose in the near future.

@CornerfieldShop

3 жыл бұрын

You're welcome ✌. Have fun building yours!

@thegreenguy8837

3 жыл бұрын

@@CornerfieldShop Sure Thing.

Prachtig mini project, zelfs te maken van restmaterialen. Met een kleine aanpassing en een contrasterend gekleurd stukje stof heb je zelfs een zomers strandstoeltje. Bijvoorbeeld voor kabeltjes behorende bij de laptop!

@CornerfieldShop

4 жыл бұрын

Bedankt 😄. Haha ja een strandstoel voor baby's kan ook nog 😅

@k.b.8077

4 жыл бұрын

@@CornerfieldShop Precies! Haha... Had het in eerste instantie niet gezien, maar keek de video een tweede keer en ontdekte er toen een strandstoeltje in. Het stof zou je zelfs kunnen bedrukken met het Cornerfield Shop logo. Zonnige tips!

I very like the design!!!

@CornerfieldShop

3 жыл бұрын

Thanks Kien 😃

The different builds start at: 01:04 (fixed), 03:54 (collapsable) and 06:29 (portable). Thought I would share in case you are only interested in one of the designs.

@enkeling

3 жыл бұрын

Heb je toevallig ook ergens de exacte maten van model #2? (Van alle zijden, dat zou het voor mij nog makkelijker maken dan dat jij nu al gedaan hebt). Bedankt voor de duidelijke instructie!

@CornerfieldShop

3 жыл бұрын

Hoi Bart, het beste dat ik voor je kan doen is een print op A4 van de zijkanten. Die maten zijn exact zoals ik ze gebruikt heb. Op mijn website kun je die downloaden, uitprinten en op wat hout plakken. Dan heb je precies wat ik heb. Het tussenstuk heb ik geen afmetingen van en die steun heb ik ook niet meer dus daar kan ik je niet meer aan helpen. Hopelijk heb je daar wat aan 😄

Wow.... Super, i love 2nd design

@CornerfieldShop

2 жыл бұрын

Thank you!

nice n super easy options :-) Thx..

nice and well equipped workshop

@CornerfieldShop

3 жыл бұрын

Thanks Moses! It took quite a while but I'm getting there 😉

Muito criativo. 🇧🇷🇺🇸

Nice work dude, your website is also stunning Thank you ...

@CornerfieldShop

2 жыл бұрын

Thanks and welcome! Really appreciate the comment :-)

OMG best DIY video :)

@CornerfieldShop

3 жыл бұрын

Much appreciated 😄👍

This is so helpful, tysm!

@CornerfieldShop

2 жыл бұрын

You're welcome 😄

Nummer 3 vindt ik de mooiste maar leuk ze allemaal te zien

@CornerfieldShop

4 жыл бұрын

Populaire mening 😉

Nice work and great video. Do the legs store somewhere in the frame?

Nice 👍 great idea!

@CornerfieldShop

4 жыл бұрын

Thanks 😄

You're awesome!! :)

Thank you.....I made the 1st type

@CornerfieldShop

4 жыл бұрын

You're welcome! Hope you like it ✌️

Nice designs Thanks for sharing

@CornerfieldShop

3 жыл бұрын

Thanks! You're welcome 😃

Super...

Nice

Wat voor toerental gebruik je om gaten de houten pootjes te boren? Ik merk dat de onderkant van het hout snel breekt met de kolomboor als ik gaten moet boren in kleine onderdelen. Wat is je tip hiervoor? Ik gebruik vurenhout.

@CornerfieldShop

3 жыл бұрын

Dat is een goede vraag. Persoonlijk gebruik ik graag hoge toerentallen maar wat het beste is durf ik niet te zeggen. Belangrijk is sowieso dat je het werkstuk goed vastklemt (voor kleine stukken gebruik ik een boorklem), langzaam door het materiaal gaat (niet te hard duwen) en altijd een stuk rest hout onderop legt om splijten te voorkomen. Hopelijk heb je er iets aan 😃

keep it up

@CornerfieldShop

4 жыл бұрын

Will do 🙌

👍👏👏

Hey man, loved the video. Can you give me the dimensions of pieces and cuts you made for the second stand. I visited your website but did not find it there.

@CornerfieldShop

3 жыл бұрын

Hey, I don't have any dimensions specifically for that one. It's basically the same as the first one but with a wider back so you can make slots. How wide is up to you and the slots just have the be big enough that your back piece is flush with the bottom of the two sides. Hope that helps ✌️

Hi! could you tell me the measurement of the centre piece of wood for design one I would love to make one but can’t find the measurements in the downloads for that

Hello nice video . I am new to your channel can you tell me the measurements of the wooden plates from the first method Oh I found the link.

@CornerfieldShop

4 жыл бұрын

Thanks and welcome :-)

Erg leuk gedaan. Welk soort hout heb je voor model 1 gebruikt?

@CornerfieldShop

3 жыл бұрын

Bedankt! Het is 18mm multiplex van de karwei. Niets bijzonders. Het patroon heb ik zelf gemaakt, dat koop je niet in de winkel 😉

@roadrunnerruud61

3 жыл бұрын

@@CornerfieldShop Aha, vandaar :-). Ziet er prachtig uit!

@CornerfieldShop

3 жыл бұрын

Als je wil weten hoe je zelf zoiets kunt maken moet je maar eens zoeken op 'patterned plywood'. Op het kanaal van Michael Alm (Almfab) kun je veel voorbeelden vinden.

Very nice and simple designs. I want to make one for my son as a gift (the second design). What is the size of that back piece please. I can't find that info on your website. Thanks in advance.

@CornerfieldShop

2 жыл бұрын

Hi Ashok, apologies for the late reply. The middle piece is kind of up to you. If you make it fairly wide it's more stable for the laptop but takes up more spaces. If it is too narrow it's unstable but takes up less space. So somewhere in between is your sweet spot. Hope it's still helpful.

@ashokmoghe8035

2 жыл бұрын

@@CornerfieldShop thanks. I made it taking some guesses on my own and it works nicely. My son likes it.

You can modify the first design. 1. Make a cut with width equal to the width of the wood in the left piece starting from the center bottom to half the length. 2. Similarly cut the right piece but with the cut starting from the top instead. 3. Now you can join the two pieces by inserting them together on the cuts. Creating a similar stand in an 'X' shape. You save wood and it is kinda more portable. You can detach the pieces and carry easily in your backpack. No glue neede. (The design is not my original)

I'm interested in stand number 2, what are the measurements to make one?

@kjbiggs7756

3 жыл бұрын

me too

@CornerfieldShop

2 жыл бұрын

Check out my website for details on the stands: cornerfieldshop.com/2020/05/01/laptop-stand/

which plywood u used...

@CornerfieldShop

2 жыл бұрын

Eucalyptus plywood (dark colored) and pine plywood.

Could u please mention the dimentions of the pieces

@CornerfieldShop

4 жыл бұрын

If you want more details on the project, check out my website article linked in the description.

I just made 1 ! How can I share it with you?

@CornerfieldShop

3 жыл бұрын

Cool! You can email me at cornerfieldshop@gmail.com or tag me on instagram @cornerfield_shop

do u have a pattern 4 this

@CornerfieldShop

3 жыл бұрын

Yes, on my website. Link is in the top comment

I wish I had those tools so i could build one but I haven't got any of those tools

@CornerfieldShop

3 жыл бұрын

Sorry to hear that your tools are limited. Perhaps there is a community workshop near you that can help you out?

@js.06k

3 жыл бұрын

Cornerfield Shop no there isn't sadly 😔

@CornerfieldShop

3 жыл бұрын

Where are you from? Maybe I know someone close that can help you out 😊

@js.06k

3 жыл бұрын

Cornerfield Shop i am from the UK, England, London, South Ruislip

@CornerfieldShop

3 жыл бұрын

I'm going to ask around. If you send me your email address (just a quick note to cornerfieldshop@gmail.com), I will get in touch via email if I find anyone 👍.

Sir we don't have that machine at home , please suggest

@CornerfieldShop

4 жыл бұрын

What machine do you mean?

@asimp3176

4 жыл бұрын

@@CornerfieldShop all of that machine

@CornerfieldShop

4 жыл бұрын

@@asimp3176 what kind of saws do you have at home? You need at least one saw to build this stand. Perhaps a friend has a jig saw who can help you?

@asimp3176

4 жыл бұрын

@@CornerfieldShop okay , thanks

Dimensions please