Land on Sea!! Dragon72-1 Dragon Ornithopter with PixHawk and GPS:26th Flight Test for AutoTune.
Ғылым және технология
Dragon72-1 Dragon Ornithopter with PixHawk and GPS :26th Flight Test for AutoTune. Land on Sea!!
Autotune was not success.
Finally --Land on Sea!!
This place is too small for Dragon72.
Wing 23mm --Gear Center-Arm point from 11.5mm to 10.5mm
Length of Arm from 49mm to 48mm (New Arm which can set length)
Stainless steel Shaft
Battery 1200mAh3cell G7 1400mAh 1100mAh
Width 285cm
Length 190cm
Wight 1046g with Legs (1200mAh)
Making process of Dragon72-1 and 72-2
• Making process of Dra...
Making of Dragon73 --- Small Dragon fly by AutoPilot
• 自動飛行する小さなドラゴンの製作 Small...
.
Пікірлер: 213
Honestly you need to get in talks with toy manufacturers, this one is above and beyond in realistic movement.
@BZH07614
3 жыл бұрын
Thank you.
@TheGrmany69
3 жыл бұрын
@@BZH07614 Doing so can allow you produce more sophisticated models.
@r1Scooby
3 жыл бұрын
@@BZH07614 Had my father and other family watch some of your videos and you have everyone so impressed‼️
@BZH07614
3 жыл бұрын
@@r1Scooby Thank you.
Very impressed indeed, thank you for sharing this beautiful mechanical gem.
@BZH07614
3 жыл бұрын
Thank you.
i love how in slow motion it flies like a real dragon, while in normal speed it flies like a bird
So Beautiful! When I was in my teens, my dad bought me a Dragonfly styled RC ornithopter. I was skeptical, the design looked so simple to my young mind,, I wondered "can this really flap its wings and let me fly it!?" Well, that little dragonfly sits as one of the higest airtime of all my hangar! Love flying it up and down the gentle wind corridor of my street! My favorite is to stop the wings at the most level, let it glide a little, then start slowly flapping again into the wind, you did it a fw times in these flights :) Looks like it flies very good probably better than my old dragonfly, however the looks are Fantastic !! Oh my gosh thought i was watching Lord Of The Rings or about to save a Skyrim village ! Congratulations to you, and thank you very much for sharing !
@BZH07614
2 жыл бұрын
Thank you.
So cool, how nice when flying the dragon in the sky!👍
@BZH07614
2 жыл бұрын
Thank you.
It's very hard to impress me these days, and you did it. I imagine program such a beautifull machine so I can go with him to the beach, launch.... he runs by him self and come back to my hand just like an eagle! and making some scary sounds in the air.... well done!!! This has an insane hours of work behind I bet!!!!
@BZH07614
2 жыл бұрын
Thank you.
That is really cool. You make me smile. Awesome work!
Fascinating series of videos watching the progress 😁👍
@BZH07614
3 жыл бұрын
Thank you.
These robotic dragons are really incredible, the most ingenious home made RC machine in KZread!!
@BZH07614
3 жыл бұрын
Thank you.
I really enjoy this Video. Like to fly on the back of a big one! Greetings from Germany
@BZH07614
3 жыл бұрын
Thank you.
@ahmdabdallah5811
3 жыл бұрын
What Is Islam? Islam is not just another religion. It is the same message preached by Moses, Jesus and Abraham. Islam literally means ‘submission to God’ and it teaches us to have a direct relationship with God. It reminds us that since God created us, no one should be worshipped except God alone. It also teaches that God is nothing like a human being or like anything that we can imagine. The concept of God is summarized in the Quran as: { “Say, He is God, the One. God, the Absolute. He does not give birth, nor was He born, and there is nothing like Him.”} (Quran 112:1-4) Becoming a Muslim is not turning your back to Jesus. Rather it’s going back to the original teachings of Jesus and obeying him
@Vin_G
3 жыл бұрын
Yes I would also love to see a big one and a person strap to it. Then compete with Flyboard Air or Gravity Industries! :)
I love the idea of freaking someone out with one of these
@BZH07614
3 жыл бұрын
I do, too.
So amazing you need more attention friend keep up the amazing work‼️
@BZH07614
3 жыл бұрын
Thank you.
Love it. You make the coolest bird's Keep u're wings in the sky's 🖖
@BZH07614
3 жыл бұрын
Thank you.
This is actually thousands times better than Festo's animals!!! Absolutely incredible, will you do a tutorial one day?
@BZH07614
2 жыл бұрын
Please look Photos of Making process from 1:53 Making of Dragon72-2 Dragon Ornithopter kzread.info/dash/bejne/X2V4lcqij6_deNI.html
@geo.33
2 жыл бұрын
@@BZH07614 Ohh many thanks!
Beautiful Dragon !!
@BZH07614
3 жыл бұрын
Thank you.
WOW! This was the coolest thing I've seen in a long time!!!
@BZH07614
3 жыл бұрын
Thank you.
Truly quite something...very impressive.
@BZH07614
3 жыл бұрын
Thank you.
Amazing work..
@BZH07614
3 жыл бұрын
Thank you.
I'm fascinated by your dragon
@BZH07614
3 жыл бұрын
Yes.
Incredible, well done.
@BZH07614
3 жыл бұрын
Thank you.
素晴らしい!! 見た人誰もが驚いて笑顔になりそうな、こんな機体が作りたいデス
@BZH07614
3 жыл бұрын
ありがとうございます。
GOD BLESS YOU AMAZING JOB
@BZH07614
3 жыл бұрын
Thank you.
OUTSTANDING WELL DONE
@BZH07614
2 жыл бұрын
Thank you.
Very beautiful! Cool!
@BZH07614
3 жыл бұрын
Thank you.
Appears to be shades of "How To Train Your Dragon". Nicely done and very clever. Go fly it over a residential area and I'll bet someone will call the cops saying the saw a dragon flying around their neighborhood.
@BZH07614
3 жыл бұрын
Thank you.
So nice! I would pay more for a giant Dragon Drone to deliver my Amazon boxes!
@BZH07614
3 жыл бұрын
Thank you.
@ayuse01
3 жыл бұрын
@@BZH07614 Mr. Kakuta, do you have a spring device to smooth the power demand? It feels like your gear mechanism is not loaded equally around the rotation of the gear.
Your wife did a beautiful paint job😃
@BZH07614
2 жыл бұрын
Thank you. I painted this Dragon.
I love how it maneuvers at 12:36 it looks so real
@BZH07614
3 жыл бұрын
Thank you.
A true thing of beauty. I've built a body of pvc,for a robot that is just that length . But more I'll use it and sensors to steal through the "land scapes", like climbing or maneuvering around.but my dream is one light enough to trot ,swim and open and fly.and there you have it a flying dragon in all the right proportions. Something an designer like me has always wanted. Hint.
@BZH07614
3 жыл бұрын
Thank you.
Looks like a real dragon nice work loud however needs shooting flames or at least smoke out the nostrils?
A work of art.
@BZH07614
3 жыл бұрын
Thank you.
Nice dragón
@BZH07614
3 жыл бұрын
Thank you.
Is this just to F with people that are at a distance? I love it! >:0
@BZH07614
3 жыл бұрын
Thank you.
That's pretty slick.
@BZH07614
3 жыл бұрын
Thank you.
@randall1959
3 жыл бұрын
@@BZH07614 Thank you for sharing. I've watched the previous videos and you have one of the best flying ornithopters I've seen.
@BZH07614
3 жыл бұрын
@@randall1959 Thank you.
U need to add fire spitting option, that regularly due to movement of wing or air it spit gas that come into fire
Brilliant
@BZH07614
3 жыл бұрын
Thank you.
Fantastic
@BZH07614
3 жыл бұрын
Thank you.
it loos so natural in the sky! how does it fly in the wind? do you think it would be possible to slope soar with it? keep up the good work!
@BZH07614
3 жыл бұрын
Thank you. Slope may be OK. Please look gliding. kzread.info/dash/bejne/ep53tdWumLu1Y7g.html
Domo arigato Kazuhiko san. We may soon live in a time when we may ride the back of a dragon!
WOAHHH...this is so cool
@BZH07614
2 жыл бұрын
Thank you.
love how it flies. It moves exactly like one would imagine a dragon in flight. the movement is realistic. far far far better than the pterodactyl they used in WAR GAMES the computer creator made.
@BZH07614
3 жыл бұрын
Thank you.
@davidlangford7863
3 жыл бұрын
@@BZH07614 I hope you can release the schematics for it eventually. I love it and want one for my own. though, truthfully, I want it full scale. lol....
Oh Hell .... ! I need one of these bad......!!! 🎵🙏🙏🎶
Wonderful
@BZH07614
3 жыл бұрын
Thank you.
Very cool! The Dragon certainly flies very well plus long flight time. Are you using carbon fiber rods for the frame?
@BZH07614
3 жыл бұрын
Thank you.
Awesome!
@BZH07614
3 жыл бұрын
Thank you.
Awesome work, Its a shame it has to flap so fast though, sorta doesn't feel right in a way. I dont know, would larger wings have changed that? Its proportions look perfect as is, but still would be nice seeing it gliding a bit as well as you would expect a dragon to do. p.s. just seen your other vid with it gliding, way cool.
@BZH07614
3 жыл бұрын
Thank you.
If you were to make them and sell them, you would be hard pressed to keep up with demand. I would buy one. Thanks for the video.
@BZH07614
Жыл бұрын
Thank you. But, It takes a lot of effort and time to make this one Ornithopter.
magnificent
That is an amazing piece of engineering. I'm curious if any large birds of prey have ever come into your air space while flying?
@BZH07614
3 жыл бұрын
Thank you. Birds are afraid and do not approach.
@gomes6422
3 жыл бұрын
@@BZH07614 I would be afraid too If I saw this thing flying
Well done! Do you set pixhawk to stabilize all 3 axis? Does it help?
@BZH07614
3 жыл бұрын
Thank you. Pixhawk has 6 axis stabilizer. It can well for stabilizing .
Cgi is pale in comparison with this one great work by the way
Looks like it needs great to be way up there gliding.
@BZH07614
2 жыл бұрын
Thank you. Gliding to sea.
wow , brown dragon.
How many birders have you freaked out with your creations? Your creatures are awesome!
@BZH07614
3 жыл бұрын
Thank you.
Great Great Great!!!
@BZH07614
3 жыл бұрын
Thank you.
WAY COOL!
@BZH07614
3 жыл бұрын
Thank you.
wow nice
@BZH07614
3 жыл бұрын
Thank you.
Amazing! Now 10x bigger and capable of snatching up pugs (for clicks of course) :-)
reminds me of my wowwee flytech dragonfly i had as a kid, i wish these rc dragons would be for sale in 2021, id buy one even for $500 they are so cool!
@BZH07614
3 жыл бұрын
Thank you.
Will you work on both hovering and moving ornithopters?
@Jangel0302
2 жыл бұрын
Dune Ornithopter.
Please sell the schematics to Tamiya so we can all fly our own dragons
@r1Scooby
3 жыл бұрын
Fully agree it will make all of our lives much happier 🙂
Really difficult finding medium between propulsion and gliding with a ornithopter.
mind blown amazing. i want one. or six.
@BZH07614
3 жыл бұрын
Thank you.
Put a silencer on that thing and people would be thinking its real
@aquiroz651
3 жыл бұрын
There is a metallic sound that show it is not real but anyway there are sound when the wings push the air.
Wow its over 1kg and flies on 1200mah 3 cell? Thats pretty efficient! Does it have a way to lock the wing in a spread out position for gliding?
@BZH07614
3 жыл бұрын
Please look Next. NewGLDAB kakutaclinic.life.coocan.jp/GLDABE.htm
@BZH07614
3 жыл бұрын
Gliding kzread.info/dash/bejne/ep53tdWumLu1Y7g.html
On of the engineering great and complicated model build by humans Hope and wish for more success in this yours hobby and hardwork And one more think to ask you how much time and money you take to make this same model
@BZH07614
3 жыл бұрын
Making time is about 3 months and Cost is about 250000JPY
@kenkaneki3159
3 жыл бұрын
@@BZH07614 thank you
@kenkaneki3159
3 жыл бұрын
@@BZH07614 I shared this in my class and friends, relative Atleast least I can do that much 👍🏻
Could a tail wing give it free lift and stability because of the oscillations?
@BZH07614
3 жыл бұрын
Tail wing is used for Flight control.
@See_Sharp
3 жыл бұрын
@@BZH07614 I was referring to the tip of the tail as there is up and down oscillations.
@BZH07614
3 жыл бұрын
@@See_Sharp Vibration of a tail may be reduced by a tail stability board. Please look NoghtFury75 kzread.info/dash/bejne/kYGos62nm5iXYNo.html
how does one replicate reptilian dragon ornithopter!? years ago, i stick n glued together a rubber band flimsy flapper.. this sir, u have evolved a new breed of aero'beasts! perfect for course races? several flying a race track would be thee bestest post 2020 millennial Jurassic/Future race ever! mate em please make more them.. we, the internet.. wish/demand a race! please. thank you.
@BZH07614
3 жыл бұрын
Thank you.
I want one!
You have good innovation and ideas don't waste it ya try to start a business through this or it's just your passion
@BZH07614
3 жыл бұрын
Thank you.
Imagina se o Silvio Santos ou Ivo Holanda vê um vídeo desse, até imagino o susto da galera! Kkkk
@leandroluckei
3 жыл бұрын
O QUE! O QUE! O QUE! RAPÁÁÁ!!!!
Where do you get the dragon ornathopter ? I'd love to get one 😊
@BZH07614
3 жыл бұрын
Please look my website. kakutaclinic.life.coocan.jp/KOrniSSt.html
@kenkaneki3159
3 жыл бұрын
@@BZH07614 how much money and time it takes to make this same model
@BZH07614
3 жыл бұрын
Making time is about 3months. Cost is about 250000JPY.
@kenkaneki3159
3 жыл бұрын
@@BZH07614 I'm studying engineering now and I don't have that much money now but after completing my study in 1 year I definitely will buy it within next 2-3 year ASAP And if possible I'll come to you to meet Thank you
Where could I purchase one from you personally, & with signature of ur name on it! Please I wish I could build what u build.
@BZH07614
3 жыл бұрын
Please look my website. But, I do not make Large Dragon72 now. I can make small Dragon73. kakutaclinic.life.coocan.jp/KOrniSSt.html
sea-dragon !
This is cool amazing really I wish it had a glide mode can I get exhausted just watching it also would be cool if you could land on his feet not asking too much right LOL
@BZH07614
3 жыл бұрын
Thank you. Please look 2:40 at kzread.info/dash/bejne/ep53tdWumLu1Y7g.html
i need to see the flight system
❤️
Only thing you're missing is Emilia Clarke ----- DRACARYS!!!
Can it poop?
I would buy one
Btw tbh with you that's a wyvern, dragons have six prehensile limbs meaning four legs and two wings wyvern are more Realistic to life because they have four limbs and use there wings like a pterodactyl so there is kind of a differences I guess just kinda had to share lol
if you make an even bigger one. you will surprise people. cuz it's so realistic lol
@BZH07614
2 жыл бұрын
Thank you.
Y e s
Where should i buy this..
@BZH07614
3 жыл бұрын
This ornithopter is not sold. It was produced by a request of production.
Is this close to Fukushima nuclear power plant?
@BZH07614
3 жыл бұрын
This place is 95km away from a Fukushima nuclear power plant.
Is it nuclear power plant on the background?
@BZH07614
3 жыл бұрын
It is a thermal power station.
Can you upload a build video for this?
@BZH07614
3 жыл бұрын
Please look . kzread.info/head/PLErvdRrwWuPrBMsLQTJn9XXd3CKl23lVS
@BZH07614
3 жыл бұрын
kzread.info/dash/bejne/hWx9ypWGn9iWqpc.html
Holy shit
Can you show how to make it
@BZH07614
2 жыл бұрын
Please look from 1:50 kzread.info/dash/bejne/X2V4lcqij6_deNI.html
All that's left is a hover mode and then we can have dragon wars.
Wish I could afford a dragon
I want one
OMG ! These creatures really exist?
@BZH07614
3 жыл бұрын
Thank you. In Fantasy
I am going insane
do you sell thos
@BZH07614
3 жыл бұрын
Dragon72-2 flew to France.
@KironVB
3 жыл бұрын
No longer this one it seems, he does have others he sells. kakutaclinic.life.coocan.jp/KOrniSSt.html
i need one to be really life like , and have it for my pet , that is so relistic to a real life one , that it can jump in bed with me and sleep with me when i sleep .
Naga gontro
This will show up in peoples recommended list in 2030 and suddenly get 60K likes.
@BZH07614
3 жыл бұрын
Thank you.
So lets get prank peoples 😀
... and then the eagle pounced ..