Land Cruiser Hidden Winch Mount Installation
Автокөліктер мен көлік құралдары
We install the Trail Tailor Hidden Winch Mount on my 100 series Land Cruiser. It's a mostly self-explanatory process, but I thought I'd show the process and add to the existing instructions provided by Trail Tailor.
Пікірлер: 45
Thanks for sharing on how to mount a hidden winch mount for the Land Cruiser!
@thelandcruiserproject
3 жыл бұрын
👍
I grabbed a alloy winch bar from market place for $50, a winch cradle for $70, gave a local boiler maker/fab shop the drawings and measurements of what I wanted done to the winch cradle and cost me $50, Its mounted to the chassis rails with 4 bolts on each side and 4 bolts on the top, I mounted the winch upside down so I can just reach under the bar to move the engage/disengage/free spool lever. Grabbed a winch using a eftpos gift card that came with a new phone plan all up cost me $170 best investment I've ever made on my Landcruiser. Used it about 20 times and 10 of those were in 1 day when bad storms and floods hit when we were out winched out my self 4 times and 4 other 4wds that were with me.
@thelandcruiserproject
7 ай бұрын
Sounds like money well spent!
Looks pretty good, I definitely would consider this
@thelandcruiserproject
3 жыл бұрын
Thanks - I think it's a great option balancing cost and weight.
Really informative video.
@thelandcruiserproject
3 жыл бұрын
Thanks!
Nice job bro. Don't go back and look at my DIY hidden winch mount! LOL
@thelandcruiserproject
3 жыл бұрын
Or your drilling holes into the rear cargo area 😬 It's all good though, you get the job done!
@AdventureTEQ
3 жыл бұрын
@@thelandcruiserproject What else ya gonna do? This thing aint destined for a car museum. Drilled holes in my cargo bay are the LEAST ugly thing on this ancient truck. I surpassed the point where I had any delusions that this is a "nice truck". It's moved into the category of being an old wheeling rig, like my 40 in it's last life. And I'm just fine with it!
@thelandcruiserproject
3 жыл бұрын
So true! I'm very delusional but each time I run some branches down the side or drop a bolt and nick the paint, it helps me be a bit realistic about it all. I still can't take it out in the salt though!
Thanks for your video but can I ask you where you got the winch mountain for It?
@thelandcruiserproject
3 жыл бұрын
From Trail Tailor www.trail-tailor.com/
Great video, but where did you locate the control box? Didn’t see that.
@thelandcruiserproject
3 жыл бұрын
On the passenger side of the winch.
The sawzall is where I lose my nerve.
@thelandcruiserproject
2 жыл бұрын
This one was no sweat, or at least would have been with the right tools. I've since got a couple cutoff wheels and a die grinder. I'd feel much better about the job now.
This is something I’d like to do!I don’t like the big heavy crazy steel bumpers.
@thelandcruiserproject
3 жыл бұрын
I think it's a great idea to keep weight down. Those that spent a lot of money will say it'll help protect the truck in the event of an accident, but I think it's a small window of accidents that don't cause damage to even the steel bumpers. Deer hits on the other hand...
@jadlem6851
3 жыл бұрын
Ok.so I have one land cruiser prado fj120. (2006) I can install on it ?
@thelandcruiserproject
3 жыл бұрын
Maybe!? Check out some of the 120 forums on ih8mud or elsewhere.
@jadlem6851
3 жыл бұрын
Hi bro can you give a link about this forum?
@thelandcruiserproject
3 жыл бұрын
forum.ih8mud.com/forums/lexus-gx-gxor.277/
Hi i want to ask what is the tire size and is it safe to add spacer on same rim?
@thelandcruiserproject
3 жыл бұрын
I'm using 285/75r16 (33"). I'm not a fan of spacers, but many do use them.
Loctite is your friend use some on every bolt .
curious how ur winch is working? if u can`t see it how do u feed it?? to keep from binding?
@thelandcruiserproject
3 жыл бұрын
Haven't used it much. It's more of an insurance policy. You can see it through the grill.
Awesome. Are you on mud?
@thelandcruiserproject
3 жыл бұрын
Yes, but I lay pretty low. I need to change my alias sometime.
Which winch did you go with and any fit issues?
@thelandcruiserproject
3 жыл бұрын
Smittybilt X20 12k No fitment issues at all!
Hi friend how are you? Thank you for this video. So can you send me some informations the winch. I wanna buy one.
@thelandcruiserproject
3 жыл бұрын
I didn't get it from Amazon but here are the details: www.amazon.com/dp/B00K150X2E/ref=cm_sw_r_cp_apa_fabc_JR5JC97B6Y4W8C2TA43W
Get a proper sawzall and a good demolition blade and those cuts take like 30 seconds.
@thelandcruiserproject
3 жыл бұрын
I didn't want to make a trip to buy more blades 😂
So no ARB bull bar? 😥😥😥
@thelandcruiserproject
3 жыл бұрын
@Gantry Crane 🤮🤮🤮
@TheMultisportGeek
3 жыл бұрын
@@thelandcruiserproject Blasphemy!!! 😞
@thelandcruiserproject
3 жыл бұрын
@Gantry Crane You should know how I am feeling about ARB. Very little ARB on my truck these days.
@TheMultisportGeek
3 жыл бұрын
@@thelandcruiserproject It’s all good. Love your videos man. Keep em coming.
@thelandcruiserproject
3 жыл бұрын
@Gantry Crane Thank you. Lots of work to do still...I bought another project but I'd lose all my subscribers if I showed it!