3:49 step 1 7:52 step 2 10:21 step 3 15:22 step 4

Brant, thank you for taking the time to do this. You are a huge help and an inspiration. Please keep doing what you do.

@Brant_Moore

Жыл бұрын

Thank you!! I'll do my absolute best! The truing video is coming soon as well

Very clear explanation. Thank you!

Thank you Brant! This is now the must-see BMX wheel lacing video of all time. The other thing worth mentioning is how to bend the spokes properly while going under.✌

@Brant_Moore

Жыл бұрын

Hell yea thank you!

Thank you ! I had a 48hole five lace .Four over and one under your vid/ helped me to get it back all together!👍👍

I've wanted to build a set of rims for a while but it seemed so daunting. Thanks for making it make sense!

@Brant_Moore

Жыл бұрын

Heck yea I hope this helps make it easier for you! And thank you for joining as a member on the channel!! There's a link on the community tab that should get you into the members only discord group

The hardest part of successful wheel building is remembering the critical beginning steps and getting that first spoke placed correctly. The valve hole to hub logo alignment might not effect performance, but overlooking this gives you nothing to be proud of. Once you know this small detail, you won't be able to ignore it whenever you look at a wheel. I also recommend Ali Clarkson's tutorial on building strong wheels.

@Brant_Moore

Жыл бұрын

Absolutely! The valve hole thing is so simple it’s like why not right?

My first job was lacing rims because I knew different lacing patterns (mostly straight, 3x and 4x) and because the guy that ran the shop hated doing it... I loved it because I met a lot of cool people and worked on some really, really nice bikes. 😁👍 Edit: My best advice is to do a couple crosses to hold the rim and hub in place... It helps keep everything in place just to make it a little easier, well at least for 24 or 36 hole hubs but 48 hole hubs were just a nightmare. LoL

I like this method, the only thing I would change is after you do the first 9 spokes, run the 10th backwards and cross (if you dropped the spokes down, pull this one up), this will twist the hub to line up at the schrader valve and hold it there for the duration of the build. When you get to that step/spoke later, just make sure it's tucked if needed.

Hi, thanks for the video . . Maybe i missed some info, is it all your stuff specification at 1:27 . . length of spoke, ERD, etc? Im asking because im trying follow your video but after 3 cross in a half side, the spoke is too tight, im afraid my spoke will break . . i dont know maybe my spoke is too short 😅 Thanks for the answer 👍

Looking forward to this one

@Brant_Moore

Жыл бұрын

Thank you!

Thanks! I successfully laced my first wheel yesterday and my truing stand may not be park tool but it gets the job done 👍

@Brant_Moore

Жыл бұрын

Did you use my video to lace and true the wheel?

@bobbymyers9030

Жыл бұрын

@@Brant_Moore yeah buddy!

@Brant_Moore

Жыл бұрын

Dude that is SO cool to hear!!!!!! Thank you for letting me know! are you stoked with how it turned out?

This should work well for 48 holes too i take it? Im building my first wheels,peregrine 48's super pros.

Are bmx rims front and rear specific and how do I calculate spoke length

@christopherstaples5131

3 ай бұрын

spoke calicolator

I’d always recommend carbon fibre spokes. Saves a good amount of grams on your bicycle

Drive side 180.0mm non drive side 184.0mm for 3 cross for that wheel build 👍🚲💨

What Abt extra wide rims w/ the wider spoke hole spacings? Is it the same difference or is the corresponding hole different ( criss-cross) ? Trying build up rims now. Wud be extremely helpful - eclat bondi for reference

@Brant_Moore

Жыл бұрын

Same as what I say in the video if you’re doing 3 cross normal lacing

The way epic bmx is faster and easier 1 nd 6 for 3 cross 1 and 8 for 4 cross

There is no shorter or longer spokes when it is ordered and it is not specificied. The manufacturers makes spokes of the same length.

I can lace wheels all day...I just can't tru a wheel for $h!t

Just fyi... you dont need to name drop part maker. Your teaching how to lace a wheel not sell products

@Brant_Moore

15 күн бұрын

hahahahahahaha!!!!!!