WELL DONE. Thanks for taking the time to help others find their way through the secret world of KUBOTA maint.

I have the ZG327. Your video is so helpful. Thanks a lot.

@RaztechPowersports

2 ай бұрын

Thanks for watching 🙌🏻

Top notch!! I’m getting ready to do this service on my ZD323 this weekend. Glad I found your video!!

thanks for the video.I have a ZD1211 (with a 60" deck) --- my manual says that only the RH and LH models have the rear axel gear case plugs ... time to go take a looksie. thanks again.

Great quick video, just helped me out without any guess work 👍👍

@RaztechPowersports

5 ай бұрын

Glad it helped 👍🏻

This intimidated me prior to watching the video. Thank you!

@RaztechPowersports

Жыл бұрын

Glad it helped 👍🏻👍🏻👍🏻

I needed to see instructions for a 327 but trust I learned from your clear video a few great suggestions. thanks!

You actually take out both top & bottom rear trans. case bolts. The bottom one to drain, the top one to breathe when filling. The top bolt hole will also give you the correct level when filling.

@RaztechPowersports

Жыл бұрын

I’m going to take a look at that for sure! I have to change the oil on my zd326 soon

@myredute

Жыл бұрын

@@RaztechPowersports It says it in the manual & I've just done my ZG222. As soon as it starts coming out of the top hole, it's full. You'll get 5 litres of UDT in at once but you need to start the mower to get the levels across other -wise you'll pour the overflow on the floor.You have to do the other 2.5 litres slowly!!!!

@johnschweiger6486

Жыл бұрын

@@myredute I have a ZG222S. Would the way this trans. oil change was done, be the same for my 222s, other than a different capacity of oil? His mower took 12 quarts. The ZG222 takes 7.9. I cant find any videos on my model of mower.

@myredute

Жыл бұрын

@@johnschweiger6486 I've gotta say John, nobody else knows what a ZG222S Kubota is, including me here in Australia. It might be some sort of hybrid model - you'd better ask the dealer you bought it off. All that being said, it would be the way same for both models in the way you change the oil, as I previously explained. The Trans. fluid is the lifeblood of these great Kubota Zero Turns so you have to do it right. Your owners manual should show you more!

@johnschweiger6486

Жыл бұрын

@@myredute I guess I should have clarified, that the letter S on the ZG222, stands for, that the mower deck is stamped as one piece and not a welded deck like a regular 222. Although the engine on the 222, and the 222s are the same. Bottom line, same engine, cheaper deck.

Outstanding instruction. Thanks. This saved me a ton of time!

@RaztechPowersports

2 жыл бұрын

Glad to hear and thanks for watching 🔧👍🏻

thanks, I just did the service on a ZD326H with a 72" deck. I missed the axle drains on the first round. I knew something was wacky when it was over full with 1.5 gal. I drained the "gearbox", set that aside, pulled the drive wheels, and drained the axles. I didn't have trouble on the refill. I started it and let it run for a few minutes(that filled the filters). and got all the oil in. Don't you just love the price of UDT2 and the filters. LOL

@RaztechPowersports

Жыл бұрын

Yes they are very proud of there oil and filters 🙃 glad to hear you got it figured out 👍🏻

Spot on....well done and to the point!

@RaztechPowersports

Жыл бұрын

Thanks for watching 👍🏻

I’ve turboed my zd331 as well as removed a fuel pump shim to change timing and turned the fuel screw best thing I’ve ever done, period

@RaztechPowersports

Жыл бұрын

I’m tempted to do it to my zd326 🧐

@johnnyappleseed9254

Жыл бұрын

m.kzread.info/dash/bejne/iYJqrZV6fs-vndY.html Check this guy out. This is where I got the idea to turbo mine.

@RaztechPowersports

Жыл бұрын

@@johnnyappleseed9254 haha I’ve actually already saw it! Awesome build 👍🏻

@johnnyappleseed9254

Жыл бұрын

👍

nice detail, Thanks

@RaztechPowersports

2 ай бұрын

Thanks for watching 🏁

I have a ZD1211 (2021 model) and your instructions are very helpful. I wish I watched the video before I started the work 🙂

Thank you for posting this!

@RaztechPowersports

6 ай бұрын

No problem, glad it helped!

Thank you.

@RaztechPowersports

2 ай бұрын

Thanks for watching 🔧

Thanks great video straight to the point very helpful thanks awesome

@RaztechPowersports

Жыл бұрын

Glad it helped 🏁

I change engine oil every 100 hours. I change hydro filters at the same time. Then I add about 1 gallon of hydraulic oil and done.

Excellent video very well done Thank you

@RaztechPowersports

Жыл бұрын

Thanks for watching 👍🏻

You don't have to take that breather apart to add oil, that whole black breather lifts out and has an O ring.

Well done.. greatly appreciate the info.

The way to make an informative video.

@RaztechPowersports

11 ай бұрын

Glad it helped 👍🏻

Perfect. Thank you

@RaztechPowersports

9 ай бұрын

Thanks for watching 🛠️

good information

What kind of hydronic fluid ,Sir?

My compliments, the video was very well done. Question regarding the outdrives at the wheels; my old ZD21 had a place to refill each of the outdrives. Can't find one on the 331. Is there a place to refill the left and right outdrives on the ZD331 or does it just main pump push hydro into them when it's restarted when the last gallon goes in? Thanks for the advice and video.

@RaztechPowersports

11 ай бұрын

I don’t believe there is a left and right fill plug. Hydraulics are a self priming system. I feel like the fluid just find its way.

@robertclaus1102

11 ай бұрын

Thank you. My older model 2004 ZD21 (the ZD331 replaced it) did have filler & drain plugs on each side. I never noticed the filler plug on the ZD331 and didn't drain them the last fluid change. So, I'll do it the correct way this time... Many thanks Sir! -Bob

@robertclaus1102

11 ай бұрын

BTW, I bought a new ZD1215 2.5 years ago to replace the ZD331. It hasn't been started in 2 years. Not nearly as good as the 331.

Thanks, changed the engine oil today , and need to tackle this also. What weight oil did you use? thanks

@RaztechPowersports

Ай бұрын

In the engine? Rotella t6

@KA-sk6pw

Ай бұрын

@@RaztechPowersports thanks for your help

Would the procedure on this mower, be the same for a ZG222, other than the quantity of oil? Your mower took 12.8qts. My zg222 takes 7.9. Thanks.

@RaztechPowersports

Жыл бұрын

99% yes. Diesel and gas comercial kubotas use the same trans

@jimb032

Жыл бұрын

@@RaztechPowersports No. the 2 series has 1 filter and a strainer. The strainer must be removed and cleaned. Its in the OP manual, page 76 on my zd221, which is the same as gas ZG222. Some people elude to removing the top breather plug on the axle cases to fill easier, but my manual says nothing about that. If that's the case, probably simpler to just yank the wheels at this point.

What filter is used for the 400hr the one underneath the mower

@RaztechPowersports

Жыл бұрын

I believe i have it linked in the description

What fluid did you use?

@RaztechPowersports

Жыл бұрын

Super udt2, I have a link in the description

@cryptidoutlaw8707

Жыл бұрын

@@RaztechPowersports great thank you

😢 mine 2020 not in same area,Wasted time

@RaztechPowersports

Жыл бұрын

Ahh yeah the newer generation are going to be different