Пікірлер

• 
  @caseman912 сағат бұрын

  Hey did you need to rejet the carb. Thanks

• 
  @RaztechPowersports2 сағат бұрын

  @@caseman91 stock jetting

• 
  @user-ny7xk3hw7cКүн бұрын

  So are the formans all time 4x4 or is there a lever for 2wd

• 
  @RaztechPowersports23 сағат бұрын

  @@user-ny7xk3hw7c yes it’s full-time 4x4

• 
  @robmccance2 күн бұрын

  Thanks for the video. Looks like I'm 6 years late to the party. Tried to install those same oil cooler lines in my 2010 MT Base today and was like screw it, these crooked pipes are not both going through that maze to get to the front. I'll come up with something else, probably removing the crooked solid metal ends, snaking the flexible lines through, then reattaching the metal ends. Or something!

• 
  @MrTeff9996 күн бұрын

  I fixed my grounding problem by running a grounding wire all the way (through the frame) from the tail lights to the plug. It eliminates all possible failure points.

• 
  @lycanit7 күн бұрын

  Super cool, bike bro I got one to restore myself. I got to show my girl this video to show what it can be thanks.

• 
  @user-jp4ic1ys2q7 күн бұрын

  How much did you end up paying for the bike? Seems like a good deal

• 
  @JohnJKelly-of4dc7 күн бұрын

  Mine has 2 3 and 4 but won't go into neutral or 1st

• 
  @anthonyscott167 күн бұрын

  Very clean look bro. Using the socket was pretty clever as well.

• 
  @RaztechPowersports7 күн бұрын

  @@anthonyscott16 thanks! Always problem solving.

• 
  @jack_freiburger8 күн бұрын

  will this give a dash light

• 
  @RaztechPowersports8 күн бұрын

  @@jack_freiburger no sir

• 
  @larryphillips416411 күн бұрын

  Don’t buy the K&N cold charge pipe kit, it’s bs. They trying to save money by not making the little rubber elbow piece too short by 1/2” and the metal clamps are 1/2” too short as well. Fucking hell cmon K&N. I’ll give you $5 more dollars to not make this shit a struggle fest!!!

• 
  @thelefthandedshooter9912 күн бұрын

  That was my first bike I got in 1980 for my birthday.

• 
  @lancewilson365812 күн бұрын

  How is the tractor holding up?

• 
  @rudysandoval172514 күн бұрын

  Just bought this for my ktm 300… Definitely taking this back asap. Ramp is way too steep, especially with my 3/4 ton truck factory receiver hitch height. Once bike is in place, trust me, it’s a pain in the rear to get out! Loading bike on is not easy either. This video failed to mention this important fact.

• 
  @Dave-sw2dm14 күн бұрын

  I have had mine for 6 years and hauled 300 lb bikes thousands of miles. I did add led trailer lights for safety.

• 
  @andrewkuebler433517 күн бұрын

  Does the ground wire have to be white instead of green like usual?

• 
  @MrCycled18 күн бұрын

  trust me you buy new side skirt for nothing lmao

• 
  @Evandiego1618 күн бұрын

  Nice to see the Renegade do other things than mud bogging. I myself prefer trails and water crossings than soupy mud runs.

• 
  @MichaelHoleman-v2h18 күн бұрын

  Thanks for the input. I caught the conversation in comments about the slider in the carb wearing. Is that pretty common and what solutions are there other than buying new? Dealer is $187 if they can get it. Unfortunately it also sounds like this machine has already had the OEM carb replaced with aftermarket. Any advice for finding a reasonably priced OEM (eBay not looking good)?

• 
  @RaztechPowersports18 күн бұрын

  @@MichaelHoleman-v2h have you opened up that carburetor yet? Worth a try. Since you already have an aftermarket carb, it might not hurt to try another one

• 
  @MichaelHoleman-v2h19 күн бұрын

  Couldn’t get the video uploaded. Practically no rev capability.

• 
  @MichaelHoleman-v2h19 күн бұрын

  Great overview b/c I’m looking at one right now to possibly buy. It does need new pull cord & cover panel for that side, but the carb sounds like a big issue on this one. Starts & idles (electric) just fine, no smoke. But doesn’t throttle or ramp rpm well. I’d like to share the video of this that I got today and see what you have to say. Called local Kawasaki to see what OEM carb might cost & check availability. It’s not (2003-4 I think) anymore. Carb slide is but almost $200 now. Looks like lots of universal near fit Chinese carbs are available online, I think that’s what’s on it now too. Advice?

• 
  @RaztechPowersports19 күн бұрын

  @@MichaelHoleman-v2h clean the OEM carb and you will be fine. Main jet is probably clogged. I always stay away from cheap aftermarket carburetors, they typically are not jetted correctly.

• 
  @isakaspebrant655120 күн бұрын

  Could this be the problem for me to even if i have the electric shifter?

• 
  @RaztechPowersports19 күн бұрын

  @@isakaspebrant6551 potentially yes

• 
  @rogered549920 күн бұрын

  Has the creek ever gotten high enough to wash over the bridge? How has it held up?

• 
  @MaddenNC20 күн бұрын

  Does anyone know the top speeds on these because I like how they look and I like the price range but I also want something that is fun to rip around the road and trails

• 
  @RUBIZEN20 күн бұрын

  I hve one and the ramp needs to be longer. My jeep is lifted and the short ramp on a lifted vehicle make it hard to push up the ramp.

• 
  @RaztechPowersports20 күн бұрын

  Yeah I could see that being a problem

• 
  @brandonjanuhowskimusic303421 күн бұрын

  Corsa sounds so much better

• 
  @MrOrangemudder21 күн бұрын

  Have any videos on getting the fuel system to function correctly?

• 
  @RaztechPowersports21 күн бұрын

  The valve on the tank is a good starting point then follow the flow. Filter, pump, carb, etc

• 
  @polymetric261421 күн бұрын

  This whole hydraulic system seems like it should be used as a demo for what not to do when designing a hydraulic system.

• 
  @billrobarge947222 күн бұрын

  Thank you. My 2000 Foreman 450s had this problem after sitting 9 years. Hooked it up with a chain to my trailer hitch. Secondary broke free. Shifts great now. ❤

• 
  @RaztechPowersports22 күн бұрын

  Yes indeed!

• 
  @illustr8phee10023 күн бұрын

  how to get the shaft apart?

• 
  @RaztechPowersports22 күн бұрын

  Steering shaft?

• 
  @markallen857125 күн бұрын

  I have a 1990 350d. When I put it up for winter I ALWAYS install a ratchet strap between the shifter and handle bar to keep the shifter up and the clutch released while in storage. Never had any issues!

• 
  @robinhoodloom579529 күн бұрын

  I was needing a Jetski Trailer,that can be Broken Down for Storage,, so i went to Amazon,& this popped up..is there another brand,that i could also consider

• 
  @danharoulakis4900Ай бұрын

  Thanks for saving my back ! I am having clutch slip problems and I will be trying this !! You rock !!

• 
  @larrywalden626Ай бұрын

  Thanks. Purchased a waterproof lighted switch just now after watching for my 06 rancher 350. Just finishing a top end freshening up and I want the engine running cooler than Honda sets that switch temp at to activate.

• 
  @KA-sk6pwАй бұрын

  Thanks, changed the engine oil today , and need to tackle this also. What weight oil did you use? thanks

• 
  @RaztechPowersportsАй бұрын

  In the engine? Rotella t6

• 
  @KA-sk6pwАй бұрын

  @@RaztechPowersports thanks for your help

• 
  @biz4twobiz463Ай бұрын

  if you still have the truck, this might be a recall on the Superduty trucks. Since you replaced yourself, they might be able to reimburse the cost.

• 
  @astrangemed8244Ай бұрын

  I bought one for 600 from my uncle it needs lil repairs but the frame and engine are in good condition probably going to have to put another 1200 into it, think it’s worth it for this bike?

• 
  @RaztechPowersportsАй бұрын

  Absolutely. Party are pretty cheap off of eBay too

• 
  @haltcookАй бұрын

  anyone knows a good source of parts for these in Canada let me know!

• 
  @jeremialvarez6558Ай бұрын

  I have a 2014 Durango rt and I did the say swap and I’m having issues with the bumper fitting and for the headlights did u rewire them ?

• 
  @RaztechPowersportsАй бұрын

  My Durango was a 2021 so I did not have any of those issues unfortunately

• 
  @raymondluna3187Ай бұрын

  Perdy

• 
  @Vera-xu3xwАй бұрын

  I'm here 4 years later and paid $165 using a coupon 😂

• 
  @Dave-sw2dm14 күн бұрын

  Remember that when you vote in November.

• 
  @georgewashington1106Ай бұрын

  Does this have the single line slave cylinder, or the slave with the bleeder screw? I have an 02 explorer with a manual, and the slave just has 1 line in. There's a bleeder on the firewall, but I don't see how that clears air out of the slave, which is downstream from the bleeder. Every video I see is for bleeding the slave with the bleeder screw. I'll try this and see if it helps, but I still have to bleed my slave somehow

• 
  @RaulRodriguez-kp4rmАй бұрын

  C6 z51 2008-2009 es mas rapido que grand sport ☝️🤠

• 
  @harolpescaАй бұрын

  Hola soy de Valledupar Colombia me puedes ayudar a comprar un ironton

• 
  @joshuajohnston3645Ай бұрын

  Was it just the needle bearing that was bad?

• 
  @RaztechPowersportsАй бұрын

  One of many things wrong with the primary. It was likely submerged underwater.

• 
  @domonicmartinez5338Ай бұрын

  What size spark plug wrench is it ?

• 
  @DjSerolmpАй бұрын

  I got all that parts you suggested spent 4 hours trying different things to get the bearing of but what worked for me I drilled several holes around & through the bearing and was able to twist it off after using a sawzall blade to cut a little bit that was holding everything together I just wrapped the blade in a towel until I was able to cut it in half. Thank you soo much.

• 
  @michaelschneider1365Ай бұрын

  will a 5 yr old in a booster seat fit nicely in the back of the 230i. I want to get one maybe. it’s safer then my mini countryman and slighter longer.

• 
  @norm-nasАй бұрын

  I change engine oil every 100 hours. I change hydro filters at the same time. Then I add about 1 gallon of hydraulic oil and done.

• 
  @RK-nr8qfАй бұрын

  I have the ZG327. Your video is so helpful. Thanks a lot.

• 
  @RaztechPowersportsАй бұрын

  Thanks for watching 🙌🏻

• 
  @vanguard4288Ай бұрын

  What size pipe after the resonator?