Even though I have a Husqvarna Zero, I thoroughly enjoyed your video. Great shots with the camera. And your explaining step by step was spot on. Great job, sir!

@helpinguonline

2 жыл бұрын

Glad it was helpful!

@danielmiller9413

Жыл бұрын

I love my Husqvarna mz5225

Now that’s the way a tutorial oughta be! Good job! Excellent video on changing hydro oil in yer Zero Turn mower! Very Well Explained!

@helpinguonline

Жыл бұрын

Thanks

Thanx from Hungary.

Good show! I have a Ferris IS700Z. I'm gonna change the engine and hydro oil and filters this weekend. It calls for 20W-50 non-synthetic motor oil for the hydro's.

@allaniideas3230

Жыл бұрын

BIG DOG MOWER - DIABLO - SAYS SAME THING 20/5/0 NON SYN

Great video, I'm getting ready to change my fluid now and helps a lot. Thanks Mike from Nebraska

@helpinguonline

Жыл бұрын

Glad to help

My EX mark has dual spin on filters and calls for 20 w 50

@partialperson

Ай бұрын

My Pioneer has the same, two spin on filters and calls for ExMark oil or Mobil 1. ExMark Oil has longer life as stated in the video. I wonder if those kits offered by the company that builds these hydraulic systems lasts 500 hours???

Just did everything you said exactly. 🤞 seems excellent so far.

@joshfreeman3264

2 жыл бұрын

2 weeks later and she's perfect still.

I may be Wrong but I believe the Wheels off Ground after changing Trans Fluid would apply to every Brand of Zero Turn Mower, I will use same Program when changing fluid in my JD.

On my Exmark Radius E-series, you have to crack open the vent-bolts on each transaxle so they will fill. Pretty nifty that your Lazer didn't need that step! edit: my Radius manual also had me hopping on and off, unlocking and locking the hydraulic bypasses for the bleeding/purging process. I had to do that about 7-10 times before she was done.

@Happy_Harry

Жыл бұрын

When they say the bypass valves, are they talking about the valves you slide front to rear and vice versa for the free wheel mode? I read that in the manual too. So I assume the valve is open when it is in free wheel?

@Happy_Harry

Жыл бұрын

And did you just fill into the reservoir till the fluid came out of the indivdual check holes?

Ok thanks. I own a Hustler Fas trak. My tanks will show higher after I been mowing. But the same procedure is used to change the hydro fluid.

This was a very helpful instructional video 👍thanks for sharing

@helpinguonline

2 жыл бұрын

Glad it was helpful!

That's unbelievable, it looks like he's in my garage.

Jordan Peterson even gives solid advice for lawn equipment too .🤝😳😂

@justinhudson7705

Ай бұрын

He does sound like Jordan

How could the fluid check be accurate if the ass end is raised so high?. I have a Cub Cadet Z-Force 50 and older model 2006. Is it the same?

@the_atomic_punk487

2 ай бұрын

I used to own that exact mower, April 2023 started leaking oil, bought an exmark radius. The breather tubes on top of the hydro’s broke on that cub about 10 years ago

How are you bleedind the air out with the caps closed? Thats why you run it back and forth and re check level.. But it has to be open for air to escape...

@cynthiaamos4558

Жыл бұрын

Air pressure builds up in the reservoir. When you check it, air pressure escapes

I’m wondering how the fluid level check can be accurate, if the back end is raised so high?

@ronclaros

11 ай бұрын

Indeed... good observation. 1. You should lower the tractor, if it was lifted up. Then add oil. Check for oil levels and leaks as the tractor is ground level. 2. Then jack it up. And follow the instructions set here. Some manufacturers also suggest to bleed air bubbles out by opening [hex tool] valves above pumps as you move levers forward and backwards.

@covidfake1573

11 ай бұрын

@@ronclaros I just bought a used Big dog Alpha 23hp zero turn mower. I never had one before. Is it safe to assume all zero turn mower need hydro fluid?

Isn't there a valve to first open so that air can be purged? On Ferris zero-turn mowers, there is, and you tighten it after the purge. How does the air escape during this process if the hydrolic system is sealed?

Maybe my model is different. Z246 Husqvarna reads that it is a sealed transmission system and never needs to be changed.

@joen5332

17 күн бұрын

Same thing with my 54 in

@jbrownie1212

3 күн бұрын

Most homeowner mowers have “sealed” transmissions without drains or external filters. Exmark is commercial and has serviceable hydros.

Ill save you all 25 minutes - the trick explained is to jack the rear up and bleed the hydraulics with the wheels spinning so that you have an easier time topping up the fluid reservoir as the system purges air. If you dont purge the valve the pump will likely run dry as it will empty quickly if there is a large amount of air to displace. Generally these sorts of things are explained in the full maunal for your mower, or the technical mower provided by the manufacturer of your transaxle(s)

@davehimlin2374

Жыл бұрын

You are suggesting to drain the hydro trans oil, while actually running the hydro pumps ? Isnt that dangerous because it could cause the pumps to overheat ?

@RustyCantRead

Жыл бұрын

@@davehimlin2374 you should just stick to what the manual tells you

Has anyone had the 5/8 plastic nut on the old filter strip? Any thoughts on how to now get the old filter out?

@asaphustle554

Жыл бұрын

Go from the inside. There is another nut on the other side of the filter. Use an extension an you can reach it.

Did you use engine oil?

Great info...thank you

I have been told that all zero turn mower trannies are similar to car power steering systems. Air bubbles in the oil kills pumps. On cars, I have learned to never start the engine after replacing a rack or broken line or pump. First turn the steering from full lock to full lock 10 times. Then add oil and start engine. On a mower, this would require removing the drive belt and turning each rear tire back and forward 10 turns. Sounds like a lot of work.

@halftontimrvreviewsandtips3106

4 ай бұрын

Pull the neutral switches

When I get to 75 hours. I'll let the dealer do this for me. I can handle the motor oil but this looks like work and I dont want to make a mistake.

@scrapplepig

Жыл бұрын

You have to start doing this kind of maintenance yourself, it is so easy to do and more convenient and saves a lot of money. It is EASY!

@the_atomic_punk487

2 ай бұрын

@@scrapplepigit is easy but I fear a pump failing down the road and them not covering it under warranty, I’ll let them do it so there’s documentation.

@the_atomic_punk487

2 ай бұрын

How much was it for the dealer to service the hydros?

So what exactly was the amount of fluid took every side,1 and 3 quarters of a quart or 2 quarts even???

I bought the Deere Z 425. It was the only Ztrac I found that had a grass catcher / power flow belt drive option. After a shop swapped out the factory 14 hp (sand, dust got in plus overheated at 100 hrs), installed a Vanguard 25 hp - the right steering has been off. I adjust the turnbuckle but cannot get it fine tuned. Either not in neutral all the way or jumping or not enough spped on right side. Are there other adjustments other than the turnbuckle?

The Exmark oil is alot better Mobil will do the job but not really saving anything, why did you weld on that thing for the hitch the 3 bolt holes under it are for Exmark trailer hitch way stronger its through the heavy frame metal not the light engine guard

Very nice job. I would let you work on an Air Force fighter aircraft. You don't take short cuts, you are meticulous, and you check your work.

@helpinguonline

12 күн бұрын

Thank you

I completely rebuilt min and can't get eny thing to prime.

Is this the same for a 2018 toro z master 3000 series?

@JLCLawn

Жыл бұрын

Yes

@kingotto6352

Жыл бұрын

I have a Toro Z Master and this video helped me a lot.. Thanks so much!

what happens if it runs dry? will this prevent the mower from starting?

@blueboat9581

2 жыл бұрын

The hydro pumps will run dry and the mower won't move. The hydro pumps will probably burn out. Don't let the hydro system run dry, just like your motor oil.

I have the TORO SS 5000 is it about the same as this one?

@shpaint1

2 ай бұрын

Depending on which hydros it has in it it's exactly the same. Just as quick heads up the Toro says they will not warranty those hydros if you synthetic oil in them. We just has one go out, so we changed them both. we got 5,000 hours out of both of them but one of them failed and it was because of water.

another reason to buy a grasshopper. hydro fluid change is 1000 hours and is self bleeding system. sure the genuine fluid and filter is expensive but its the cost of proper maintenance

I bough a used Big dog Alpha 23hp 52" zero turn mower. Is 450 hrs alot or not? Its a 2016 in really good condition only payed $1k not sure if it takes hydro fluid

@j.j.lanblaster42390

9 ай бұрын

if it's a zero turn it takes hydraulic fluid. Hope whoever you bought it from they changed it out once already. All zero turns are different but I have an Exmark Radius E and it says to do it every 250 hours to my knowledge but every mower is different so I would just look it up or look in your book if it was given to you when you bought the mower. Also, if it's a regular residential mower 450 hrs is kind of a lot but if it was maintained properly by changing oil yearly and spark plugs and hydraulic fluid on time it might last you quite a long time. I bought my Exmark in the spring of 2021 new and I paid $7,000 but it's semi/commercial grade and I mow almost all of my 4 acres so it was worth it if I get it to last 15 years.

How much does it cost if we don’t do this properly? Thanks

@the_atomic_punk487

2 ай бұрын

😂 $2,000

Why is my left side getting hot? And I can't find a rebuild kit mine just like yours

My older snapper says it’s sealed do not open but it’s out of fluid and barely moves.

@RustyCantRead

Жыл бұрын

See if you can locate the transaxle's tag and serial number or the exact model number and then look up maintenance recommendations based on that part rather than what snapper says. Snapper may say to leave it alone while the technical manual of the transaxle itself will tell you what to do.

Hi. I see your video. The oil 15w50 is a motor oil or transmission fluid? .. please let me know thanks for the video, is a great.

@helpinguonline

Жыл бұрын

I used Mobil 1... 15w-50 motor oil

@helpinguonline

Жыл бұрын

You can also call ExMark and the Technicians are very happy to help with questions

Is that engine oil?

Nice video

@helpinguonline

Жыл бұрын

Thanks

Thanks man 😊

@helpinguonline

Жыл бұрын

Happy to help

Awesome.

Well, it's 2000 a side if you have to change the entire drive motor. The salesman who was talking to this guy really uses the hard sales pitch. This guy was terrified when he left tht place!

@shpaint1

2 ай бұрын

We just replaced both motors and with the fluid and the filters and everything for the 75 hour fluid change it was right at $4,300 for both of them. That's on a Toro z Master 5000. But we did get almost 5,000 hours out of the first two. We change our hydraulic fluid very religiously though I mean it gets close to 500 hours and I'll change it. Not the only thing I do differently is I turn the wheels over without running the engine four or five times forward and then backwards four or five times before I even start it just I don't know I may be doing it wrong but that's the way I've done it.

@FTG777

Ай бұрын

@@shpaint1 I was thinking to do the same- turning the wheels manually. Seems like a good idea. My Toro manual just says to let it run for 2 minutes.... nothing about moving the drives while in the air.

Do you know what causes the hydrolic fluid to become white an waxy in the reservoir?

@helpinguonline

8 ай бұрын

Sounds like you got some water mixed in with the fluid possibly from condensation?.

@shpaint1

2 ай бұрын

Water. When/if you pressure wash your mower dont point the stream directly at the top of the drives.

Husvsrna raider 4x4 r16 94cm necesito cambiar hidráulico tiene 2bombas una adelante y otra atrás en español lo siento no entiendo ingles

Most non commercial Zero turn on the market are meant to be maintenance free. Meaning you should not need to do this unless you have reached over 1200 hours. So unless your operators manual recommends changing the oil sooner then just do not fix what is not broke. 1200 hours is a lot. check the fluid and as needed but unless you get water in it or something stupid leave it be on most zero turns. Per their own instructions.

@YetiSmasherOhnO

Жыл бұрын

Most, if not all Exmark's suggest a break-in hydro change at 75 hours. Then again every 500 hours like was stated in the video.

Are the wheel pumps Hydro-Gear or Parker on your zero turn?

@jonnu7772000

2 жыл бұрын

Never use synthetic oil in your hydro system.

@moisesflores9643

2 жыл бұрын

@@jonnu7772000 can I ask you why, not synthetic oil, thanks

@arthurr8670

2 жыл бұрын

@@jonnu7772000 You say that but that is what was recommended by Toro, which also makes Exmark and a lot of other brands.

@kevinmarchini5272

Жыл бұрын

​@@jonnu7772000 thats what is recommended by just about everyone manufacturers technicians dealerships and here you say no synthetics trust me they need synthetics conventional oils have poor basestocks and have lower zinc and phosphorus levels these pumps need minimum 1300ppm of each ZDDP

@YetiSmasherOhnO

Жыл бұрын

My Exmark Radius has Hydro-Gear transaxles so I bet his Lazer has the same.

The owner of the small store where I bought my zero turn said he wouldn't recommend changing hydraulic oil for at least 1,000 hrs.

@midwaymonst3r

2 жыл бұрын

the manual on my toro z master says first 75 hours

@jonnu7772000

2 жыл бұрын

Yes that's correct and never use synthetic oil in your hydro system.

@slaytanic921

Жыл бұрын

I would go by what the manual says. Mine says 75 hours for break in.

might let your viewers know not to drain the oil all over the belt - looked awfully close from the camera angle. Those are not fun to degrease

I'm not a fan of any mower branded oil or any vehicle branded oil for that matter. They either sell the name for the highest bid or contract it out to the lowest. And the drain intervals are too long, they want the components to fail, shorten the intervals by at least half.

Lifting the seat gives better access to reservoirs

@helpinguonline

Жыл бұрын

I agree...but this seat bolts down and it's too much work to remove to just change the fluid

We like Amsoil

Do they need to be bled

@helpinguonline

Жыл бұрын

no bleeding just do as I showed in the video to move fluid through the pumps and lines

@floridagirl386

Жыл бұрын

@@helpinguonline OK thank-you so much

My big dog zero turn Manuel says after first 100 hrs., then again after 200 more hrs.

@allaniideas3230

Жыл бұрын

MY BIG DOG DIABLO BOOKS ARE "F-d" one says after first 750 "not kidding another book says 50 AND MY 2021 ? MY FRAME SAYS 2018 _ AGAIN NOT KIDDING ---- DOES NOT HAVE AN OIL TANK RESERVIOR EXCEPT SMALL ONES ONES ON TOP OF EACH WHEEL ---- anyone know anything about these ?? there is a drain hole on each motor & of course how long to run befor changing with this set up ----o yea NO FILTER . GRRRRRRR

Thanks for the info. Boomer Sooner!

Aren't you totally forgetting to purge the system taking the drives out of drive by pulling the neutral or purge levers so that your first start be off the ground no resistance and no wheel turn whatsoever 5-6 times fwd and reversed. Then engage them and repeat the 5-6 times while they are moving but elevated and repeat till your final turning wheels round sounds and feels smooth and not whiney I mean that's what the purge is for! Almost seems if you're going straight to engaged wheel spin after a change that would or could scorch this plate you keep talking about but the whole point is to burp the air with the purge levers open allowing the air to escape and if your not doing that you're pushing air down stream to further risk of issues

@danielmiller9413

Жыл бұрын

And you should always run your hydros at near if not full throttle bc that's what will screw your "hydro" gears bc they run on pressure

Get rid of that crap fuel filter ..it shpuld be a comercial filter on the fuel ⛽ filter..thats a box store mtd filter

No 2000 or 2400 dollar repair, just buy a new one.

Mobile one doesn't have zinc in it !! So you hydro life is now cut in half 🤔

@kevinmarchini5272

Жыл бұрын

Yeah it does it has around 1300ppm all engine oils have zinc and phosphorus these day's they are lower around 700 to 800ppm on the average small engine oils have around 1200 to 1300ppm Mobil 1 15w50 is higher than 5w30 or 10w30 because its a performance oil

NICE WORK ARE

Amsoil

So helpful. Thanks!😊