Briliant video! I appreciate the time you took to show us how to reassemble the powervalve system and how to set it up 👍

This is a great video. Clean, articulate communication style. One of the best I have seen. Solid effort and thanks so much!!.

Very well done, sir! I didn't want to put to much pressure on some parts (they were stuck with thick soot), Your video convinced me that they actually ought to come loose.

Best video I've seen yet on this subject... not many out there on these older bikes. I've got 2001 200 and it needs a top end rebuild, so I'm glad this is here.

Amazing vid. I used this today to put mine back together. The detail is perfect 🤙🏼

Nicely done. If only all How To videos were this good.

Thanks for your expertise. Very clear concise. It shows your passion for the mechanical aspects as well as sharing.

Thanks so much Dave!! Been so scared for this job but your video is spot on, fear no more :-)

Thank you. I use youtube for help a lot. I never expect to find a video this well done. Good work.

Just what I needed, never done this job before, and this video made it simple, only had to watch it once, job done, thanks

Thank you, Dave! I'm much more confident doing some P-Valve maintenance, after watching your video.

Hey man. Thanks a lot for the video 🤘 lost top end on my 150 after rebuild (never touched power valve). This is gonna help me out a lot understanding what im looking at

Absolute life save awesome vid man

Awesome !,thanks just got a 04 200exc , and researching all the ins and outs of her ,,

Excellent video! Very concise. Thanks for posting.

Best video on the internet!

Awesome video I will use this when I do the top end on the smoker

Try some citric acid and boiling water in the ultrasonic cleaner, it takes the rust right off the bolts in short time. I use around two teaspoons per litre. It cleans the old bolts up well.

Thank you this has helped out a lot

Mine was sticking due to a lot of carbon buildup. Be sure when reinstalling everything to install the roller guides correctly after cleaning all the parts. If the roller guides are not installed correctly then it can cause it to stick as well.

Great VIDEO! congrat!

Thanks for this helped me a lot!

Excellent video!

Very helpful video, thank you

Thanks a lot for this video, very informative. I actually set the moving notch in line with the BOTTOM notch of the guide (So the valve is more open) and I’m getting a ton more torque out of the bike. Whereas I had it set before were you pointed, towards the top (I believe they call it Langston setting) and the powerband had an annoying flat spot in the midrange

@the_Jonny_

2 ай бұрын

On newer KTM models, this valve can be adjusted. I think there is also a difference here, how high or low it is set. Will there be power at low or high speeds, what do you think? I want to try it on my 2014 sx150 so that there is more power at low rpm

Thank you so much!

Good job man

Awesome helped me do mine thanks

awesome thank you!!!!

ANY GRIT that gets in lock these up and the current models after that stil bind really bad

So helpfull

Best tutorial ive seend and i have a problem i have a 2004 125 ktm and the one guiding pin with 2 dots wont spin freely ive tried sanding both the pin and the hole and then clean and lube it but still spins like there would be sand in there what to doo??...

@TheMatekk1337

5 жыл бұрын

Hey, it has been 1 month since you post this comment, did you fix it already? If yes could you be that nice and tell what was the problem?

@hugzy3200

5 жыл бұрын

@@TheMatekk1337 Hello im not sure but i believe i just kept sanding and then cleaned and lubed and just put it together but it wouldnt spin freely but the ktm works today you can watch my videos about it if you want. I have the full rebuild on video.

where could i get the Power band Collars .. and Power Band Cylinders ? could somone point me in a direction 2004 sx 125

@grahammorris738

3 жыл бұрын

Trevor pope ktm Portsmouth uk for mine roller guides or collars

@johnharbinger4231

3 жыл бұрын

Just get the oem parts from your nearest KTM dealer, get the part numbers to make sure you get what you want.

But what s if i miss 3 of these collars? Can i put it on or no?

@movitiate7634

Жыл бұрын

hell no