Krieghoff Know How - Removing & Replacing the Krieghoff Ejectors
Спорт
We get asked how to do this very often, so here is a short video showing you how to take the ejectors out and put them back in.
Taking your barrels, give the ejectors a firm tap to free them away from the spring and ball pressure. We use the handle of the Krieghoff Stock Wrench to do this as it's something most people will have handy, and we use it again a bit later on. It's a good idea to flip the barrels over so the ball isn't sprung across the room or into the grass and lost. Set this to one side.
The small spring can be removed with a bent over paper clip. In the workshop we tend to use a 0.9mm pin punch. Set this to one side also.
Clean the parts if necessary and clean the ejector channel to free it from dirt and grit. We suggest a light oil lubricant on the ejectors, don't use a cleaning oil for this. Then start putting the parts back in.
Use the paperclip again to insert the spring back in place. Use a small drop of grease on top of the spring to lubricate the ball bearing.
Place the ball back on top of the spring and before you insert the ejector, press the ball down into the spring recess, then slide the ejector over the top, back in place. Done!
The ejectors can only fit in one way so it's hard to mix them up.
Visit the Krieghoff UK website for more information: www.krieghoff.co.uk/
Please subscribe to our KZread Channel to keep up to date with our latest videos. Thanks for watching!
Пікірлер: 15
Thank you, as a new K80 owner this was very helpful.
thanks to this video I was able to clean my OU, ty!
Simplicity through explanation thanks.
Good explanation. Thanks
I found using an old ball point pen without the refill works great for hold in the ball on the ejectors when refitting.
Thank you so much.
Thank you for that...seems simple enough.
Does this technique work with the KX6 Special model aswell?
My light weight k 80 super sport how due i unlock the barrel selector witch is locked on the bottom barrel only one screw on the trigger not two hope you can help me thank you.
@alanrhonemedia
Жыл бұрын
If you get in contact with us via email and provide your serial number. Our email is sales@alanrhone.com We'll be able to check the age of the gun and instruct on a solution. I hope this helps.
Is it possible to do a video showing how to change the top lever from right handed to left handed opening or is this not to be done at home? Thank you
@alanrhonemedia
Жыл бұрын
Hi, thanks for the feedback. We would like to do more videos like this, but switching the top lever from right to left hand opening is not something that can be done at home unfortunately. It involves parts and tools not readily available and it does involve work with the top latch, and as this is a vital component to keeping the gun closed and safe, so therefore it must only be worked on by a qualified gun maker. We don't want to encourage people to at home to attempt things like this as it could potentially be very dangerous if done wrong. I hope that explains the reason why.
@dontfret147
Жыл бұрын
@@alanrhonemedia perfect response and as expected, I shall have it done as part of my next service with you guys! Many thanks for the other great videos on maintenance as they have been extremely helpful.
Oh next time give the music a miss.
@alanrhonemedia
4 жыл бұрын
Haha, thanks for the feedback. We'll consider it for sure :)