Хороший хозяин за минуту нож без всякой ерунды заточит

Wow, now you can cut an apple 🍎. Congratulations 😊

Razor sharp knife vs hard surface granite cutting board. Genius

@ectoro1

5 ай бұрын

poshol nakhooy, mudilo

@davidjones8942

5 ай бұрын

That's what I came to say: Why sharpen a knife only to dull it on a horribly hard cutting board? Use plastic or wood!

You're a true inspiration to aspiring creators

Rất tuyệt vời công cụ hỗ trợ mài dao

What a great idea. Very clever. I tried it and it works great.

Interesting idea

You really should see a doctor about those finger spasms!

To sharpen sharp knives simply and quickly, I do it another way

@trueaussie9230

6 ай бұрын

You assert you have 'another way' to "sharpen sharp knives". If a knife is already sharp, why would you 'sharpen' it?!

@ectoro1

5 ай бұрын

ты дурачок? точить острые ножи?

It was very informative and useful, thank you ❤

Did I miss cutting the chains!

За это время я 10 ножей заточил😂

Сразу видно - человеку нехрен делать.любой нож можно заточить простым брусочком.

Запомни,ножи точатся поступательными движениями НА кромку лезвия! А это,суходрочка( камень смачивать надо).

Можно готовить яблочный компот. Смочите водой брусок.

Twist and turn everything so we know it's real, no tricks??

Smart angle guide..................But razor sharp, not hardly.

Sharpens his knife then immediately dulls it on a stone chopping board 🙄

The result will be better if the blade of the knife is only worn towards the back

👍😘like

Ну ты и БАЛБЕС !!!

Soak your whetstone in water for better results, start course and work to fine. Sharpen until a burr starts to form, then flip and do the other side. You don't really need a guide.

But will it cut paper?

Take the knife to an Ace Hardware store and sharpen it on their computer controlled machine.

Пока ты наделал дырочек можно два ножа заточить взять брусочек любой подложил и точи а яблоко можно порезать и не очень острым ножом

@didierjacquin6741

7 ай бұрын

il faudrait aussi mouiller la pierre

@ectoro1

5 ай бұрын

ты в стлу пониженного уровня интеллекта не можешь всосать, что он не будет перед каждой заточкой заново с нуля делать эту приблуду. даун ты, типа алескея навального

Как подручное средство имеет право на жизнь.

Hadir dan menyimak om

Put a 'dome nut' on each end of the all-thread and you won't need to reposition the knife - just flip the whole assembly.

@Gungho1a

6 ай бұрын

Only works if your blade is dead centre of the support.

@trueaussie9230

6 ай бұрын

@@Gungho1a I don't understand what you mean by 'dead centre of the support'. However, the blade forms the 3rd side of a triangle. If the 'legs' of the frame are uneven lengths, flipping the blade lengthways will change the orientation of the blade to the stone - ie if the tip of the blade is first clamped near the long 'leg', when the blade is flipped the tip will be clamped near the short 'leg'. Even with uneven 'legs', if the blade is fitted sufficiently to correctly sharpen 1 side, when the whole 'structure' is flipped the blade remains in exactly the same position relative to the rest of the structure, thereby ensuring the same orientation to the stone. The angle at which the blade meets the stone is the important factor and that is determined by the length of all-thread that forms the 'pivot'. Therefore, the 'holding frame' must be centred on the all-thread to ensure the same angle of bevel on both sides of the blade. However, not all blades take the same angle of bevel on both sides. All told, whilst it's an interesting concept it's really not worth the effort.

@Gungho1a

6 ай бұрын

@@trueaussie9230 Flipping it over only gives the same blade to stone angle if the length of screw is the same distance from the end, to the attched angle bracket...in other words, the angle bracket (which translates to the knife blade) is equidistant from the ends. If you have two inches on one side, and flip it over as you suggest, but have two and a half inches on the side you are now rotating on, you change the sharpening angle. The sharpening angle is the important thing. If you lengthen the distance from the pivot point, to the axis of rotation of the bracket, the angle between the blade edge and sharpening stone changes.

@trueaussie9230

6 ай бұрын

@@Gungho1a So, you agree with everything I've said. Good for you! 👍 Why didn't you just say so?! 😉😊🤣

@Gungho1a

6 ай бұрын

@@trueaussie9230 You questioned me, idiot.

Good try

As a taxidermist, I use either my sharpening steel, or, my sharpening stone, it's alot quicker than wasting my time build this crap.

@Gungho1a

6 ай бұрын

For those who sharpen a lot for professional purposes, I'd agree, but this is more for the joe average who tends to sharpen once in awhile and who rounds over the edge with poor hand sharpening.

@ectoro1

5 ай бұрын

u -bad taxidermist.

@ectoro1

5 ай бұрын

and u- bad man.

Quanto tempo perso,bastava affilare bene un buon coltello.Roba fa pensionati che si annoion😂

Здорово Молодец Так держать!!!

🤣🤣

OMG- stupid device! Sharping by eye sight is just enough!!

Я и без этой ху.... ни наточу, и причём тут цепи?

PARA QUE SERVE TANTA APRESENTAÇÃO? Só se for para que o vídeo dure mais tempo. Charlatanice...

Das ist wohl ein Witz! 2 Minuten, und zuvor eine Stunde für diese blödsinnige Vorrichtung…..

🥱🥱🥱

Мудовые рыдания!!!!!

Полный отстой

Полная херня! Ножи так не точат!

Buy a bloody knife sharpener ffs 🙄

Just learn how to sharpen a knife the right way.🤦‍♂️

такую точилку в ж...у себе вставь

χαχαχαχα