Knife FAIL Restoration [Too Much Rust]
Ғылым және технология
This restoration ended before it really started. The old antique knife was just too much rusted, so I couldn't do anything at this point. In some places the old steel broke off and in other places the metal was already so thin that it could not have been used. In this restoration it was planned that the handle should be made of ebony and purple heart and the color on the blade should be extended, furthermore "Forgotten Shine Restoration" should be engraved with a laser.
------------------------------------------------------------
▶ What did I do ?! ◀
In this restoration video I can unfortunately not show many craft processes, only the derusting I show. After that I had to stop the project because the old knife was too damaged by rust. But you can see exactly the derusting and detailed my plan what I wanted to do with the knife.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Rust remover, screwdriver, wire brush, sandblasting cabin, abrasive corundum.
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share it, please!
Thanks a lot!
Пікірлер: 175
Please tell me you sent the poor old knife to an “Old Knives’ Home”, where he could tell his war stories to discarded butter knives… 🥺
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Yes the knife arrived there well and has already moved into its room. I could also observe that it has made first friends. Simply great! 🐢
@adoptedbythe1king
Жыл бұрын
Thank you! This is what I needed to hear! 😅
@silentlight6038
Жыл бұрын
no he got shattered to pieces and burn ed alive!! !! mw haha haw!!
@Orangeninja5000
Жыл бұрын
I love this small thread here, thank you three
Love it! It's just reality that things go wrong 🤷🏻♀️ still very satisfying and interesting 😌 would love to see just EVERY project of yours whether it goes wrong or turns out beautiful 👏🏻
@ForgottenShineRestoration
Жыл бұрын
Thank you for your great comment! 🐢
I think Mr. Turtle knew from the beginning that it was a lost cause.
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
I'm also starting to think that turtle knows more than all of us?! Why didn't she tell me right away...? 🤔🐢
@clayton422
Жыл бұрын
@@ForgottenShineRestoration Please give her my apologies . . . I called her "Mr."
@ForgottenShineRestoration
Жыл бұрын
🤣🤣
Poor little knife. It was very honorable of you to try and save it, but sometimes you just can't do anything more ❤️ I appreciate your efforts, and I think Turtle's heart is a little broken. We gotta get him a new knife project to lift his spirits! ❤️
@ForgottenShineRestoration
Жыл бұрын
That's right... turtle has been really sad, but turtle is already better, because we are already soon about the next project...🤩👍🐢
@HannahMattox
Жыл бұрын
@@ForgottenShineRestoration yay! 😍😍
Sad that the knife was too far gone but it wasn't a failure. I would watch every one of your videos, they are always informative. I love turtle!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤗🐢
@exilibrius
Жыл бұрын
🐢
I find it interesting that not only do we see the fail of restoring the knife but we get to see the plan you were having for it. Eventhough it didn't go according to plan, I enjoyed watching the video ✨️
@ForgottenShineRestoration
Жыл бұрын
🤩👍🐢
Love your vids, even these short ones! I’d be interested to see more of these where the object is too far gone.
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
@adoptedbythe1king
Жыл бұрын
Same!
These videos are so bingwatchable, also gives me actually alot of inspiration to also learn and perform these kinds of restorations. Very unique and understandable to newbies, thanks
@ForgottenShineRestoration
Жыл бұрын
Thank you for your great comment! 🐢
Too bad it didn’t work! Loved the idea though, hopefully you can do that with another knife :)
@benyaminlakhi7044
Жыл бұрын
Hello dear friends, visit my channel, I teach welding
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! Yes somehow I owe it to you to carry out my plan on another knife.... 🤔🐢
@Sabinee211
Жыл бұрын
@@ForgottenShineRestoration haha you don’t owe me or anyone else anything! (Well maybe you owe turtle something, he does a lot of work for you). Until now I’ve loved every video, short/Iong. As long as you’re happy making it I’ll be happy watching it :)
Loved the little turtle face! 😂🙏🏼
@benyaminlakhi7044
Жыл бұрын
Hello dear friends, visit my channel, I teach welding
@ForgottenShineRestoration
Жыл бұрын
🤣👍🐢
At least you've tried everything you can and planned it very carefully but in the end learning from your failures can be helpful for your success you did your best F.S.R. 👍👍👍
@benyaminlakhi7044
Жыл бұрын
Hello dear friends, visit my channel, I teach welding
@ForgottenShineRestoration
Жыл бұрын
Thank you for your great comment! 🐢🤩
I’ve binge watched all of your videos please keep them coming I love them
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
Badly experience is necessary experience too)
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Thats right! Thank you very much! 🤩🐢
I really love this channel ❤️
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢 🥰
Perfect restoration project good 🌟❤
@ForgottenShineRestoration
Жыл бұрын
Thank you, bro! 🐢
I hope you'll be able to find a different knife to complete this type of restoration on, it sounds like it would have been extremely beautiful!
@ForgottenShineRestoration
Жыл бұрын
Thank you! 😊 🐢
It would’ve been so pretty I hope u find another so u can carry out the idea 🥺🥺
Woww, the best!
i saw your most video and you're already MASTERPIECE Sir! keep it up!^^
@ForgottenShineRestoration
11 ай бұрын
🤗🥰🐢 Thank you very much!
Manchmal müssen auch die Besten passen. Mach weiter so. Ich freue mich schon auf das Messer, dass den beschriebenen Anstrich bekommt. ❤
@schallkiste82
Жыл бұрын
Also mach weiter so gute Arbeit. Nicht mit Passen 😂
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Vielen Dank! Ja irgendwie bin ich es euch schuldig meinen Plan an einem anderen Messer durchzuführen... 🤔🐢
@Jasm1na47Crnkovic
Жыл бұрын
@@ForgottenShineRestoration ich frage mich wie alt das Messer ist?🤔
I find it really intersting to see when the restoration is impossible.
Hiii , I love tour vídeos
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢🤩
Put it in a simple wooden frame. It would make a great piece of artwork
U are the best ❤️❤️❤️❤️❤️❤️❤️❤️❤️
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🤩🐢
خیلی باحال درست میکنی وسایلو
Don't give up, make a semi-automatic. Yes, it will take a lot, but try to make a lot. This is what we want to see, this is the whole magic of restoration.
The rust runs deep in this one 😂
@ForgottenShineRestoration
10 ай бұрын
😅🐢
2023년에 더욱 더 건강 하시고 많은 행운이 있기를 바랍니다. 멀리 대한민국 🇰🇷 에서 당신을 응원 합니다 👍👍👍👏👏👏💟💚👋👋👋
@ForgottenShineRestoration
Жыл бұрын
매우 감사합니다! 내년에도 잘 부탁드립니다! 🥳🐢
@user-yy6zt9jy7f
Жыл бұрын
@@ForgottenShineRestoration 😊👏👏👍👍💟💚👋👋👋
could a knife this far gone be melted down and made into a smaller knife maybe?
Delicious!
@ForgottenShineRestoration
Жыл бұрын
and crunchy 😅🐢
I knew you were going to eat it!
Ah ha! Would be fun to slip this into an archeological dig somewhere and let it be “rediscovered “ 😂
@ForgottenShineRestoration
Жыл бұрын
😱🤣🤣🤣🐢I imagine it kinda funny too
@stephenkeefer3436
Жыл бұрын
@@ForgottenShineRestoration it sure would. They’d get all excited !!
За старания и черепашку лайк ♥️🤗
@ForgottenShineRestoration
Жыл бұрын
Дякую за чудовий коментар! 🐢
Honestly that thing looks like its all rust, I'm amazed you even managed to get any of it off without having it turn to dust
@ForgottenShineRestoration
Жыл бұрын
That's right, in the meantime I had the same thoughts....🐢
Не бросай, навари Полуавтоматом. Да много придётся очень много, но попробуй наварить. Это и хотим увидеть , в этом вся магия реставрации. Давай, попробуй.👍👍👍👍🛠🔧🙂
Can't blame you for noping out of this restoration. As badly gone as that knife is, it might be easier to just reforge it into a new knife made of old metal.
Well, the plan sounds really good, and the kids hope turtle brush feels better.
@ForgottenShineRestoration
Жыл бұрын
Turtle is fortunately doing well again.... 🐢
wow that knife look like something you pick up shipwreck :)
I'm just gonna throw it out there, were you thinking that trying to build it up with weld would burn it up? 'Cause that'd be the only other thing you coulda done. I really like seeing the fails, it shows that sometimes, in spite of your best efforts, it don't go your way. Thanks for the video.
@ForgottenShineRestoration
Жыл бұрын
Thank you, too! 🐢🤩👍
i love it just the way it is. love to mount it on that purple-red wood and hang it in my kitchen. :) 🔪✨
Im pretty sure this is a central european "bauernwehr" knife. Its from around the 15th c and the best thing you can do is leave it as is.
Yeah, sometimes it could be fail... Because you're not a fake restore tuber!
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
I'm sad to hear the news you probably did not have the tools or techniques like welding to give it a better life but I'm glad you tried 😢(love the turtle edit)
Matkapa bağlı tel zımpara ile sürtsen rahat başarırsın.
Entscheidung ist vollkommen okay, was nicht geht, geht nicht. Freue mich aufs nächste Video.
@ForgottenShineRestoration
Жыл бұрын
Vielen Dank für dein tolles Kommentar! 🐢
Yeah repairing this wouldn't be much different from just making a new knife
I am curious what actually happens to the items that can't be restored? Can they be melted down into something else? Turned into eclectic art pieces?
@ForgottenShineRestoration
Жыл бұрын
I also don't know what I'm going to do with the old knife yet....🐢
@cindyandtheharlequins2760
Жыл бұрын
They could always be sacrificial scrap metal for electrolysis
Still restored, just more of a damage over time kinda weapon
ok fine this is too gone! :D
Forging again from failed restoration
I love how no one is talking about how cursed 3:01 is. Great video regardless.
Yeah, sometimes a project can be a bust. If you ever need a tool to do a restore on I have an old leather punching?canvas punching tool? It's been in the family for well over a century now and could use a restore.
You could collect some unsalvagable knives and then make damascus out of them (or make a collab with blacksmith to make damascus), and after that make a knife out of that damascus.
Ещё походит)
New sub ! Liked 😛🐸🙂
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! Welcome on board.🐢
The knife doesn't have to stay the same size or shape. Remove the thinnest parts and make a small blade.
You should have made a new one 😅
It was a good try
Porque ganó River
Du hast es zumindest versucht 🤷🏻♀️ Dein Plan wird sich sicherlich wann anders verwirklichen lassen 👍
@ForgottenShineRestoration
Жыл бұрын
Vielen lieben Dank! Ja das kann ich mir auch vorstellen 😅🐢
Please, go for the black and purple in another project!
@ForgottenShineRestoration
Жыл бұрын
Ok, i will do that 😎👍🐢
Hmmm, maybe try electrolysis next time? That would leave more metal I think. Oh well.
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
No, that would not have left more metal. The loss during sandblasting is not very high... 🐢
@LetsTakeWalk
Жыл бұрын
@@ForgottenShineRestoration Maybe reforging? At least the metal should be usable to make a new knife? (although that might be beyond the scope of restoration)
Rip that poor knife
Can old metal like that be melted and forged into something new?
@ForgottenShineRestoration
Жыл бұрын
I think so... 🐢
Your design would have been spectacular, and I'm sorry the knife was in such rough shape.
@ForgottenShineRestoration
Жыл бұрын
Thank you very much! 🐢
Some things are just too far gone.
Poor little knife
4:08 Thing (from Addams Family) wearing a glove 🫳🏼
@ForgottenShineRestoration
Жыл бұрын
🤣🤣🤣🐢
@pothepandasemporium8616
Жыл бұрын
@@ForgottenShineRestoration Why did you put the Tortoise emoji?
I think you could make a steak knife out of that, and you can fill the pits by spot welding I think. But maybe I got the wrong idea.
@user-zs3ft9oj1b
Жыл бұрын
I don't think the knife can be repaired because it is very worn and rusty. Therefore, the decision to fail the restoration process is correct and in place
Noooo 😟😞😔😥
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
@ForgottenShineRestoration
Жыл бұрын
😪😪🐢
I also do restoration on my channel they are very simple but well done, congratulations on your beautiful work! Eu também faço restauração no meu canal são muito simples mas bem feitas, parabéns pelo seu belo trabalho!
Oh, demasiado óxido
@ForgottenShineRestoration
Жыл бұрын
Oh sí... 🐢
can you clean the rusty nails?
Auch eine Bauernwehr. 😔
Oh well.
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Oh je. Kann passieren. Manchmal findet man unter Rost eine wundervolle Patina, vor allem bei Messern, andererseits nur Schrott. Nicht verzagen, weitermachen ! Nagle das Ding an die Wand zur Erinnerung und auf zu neuen Projekten ! Kann nur besser werden !
@ForgottenShineRestoration
Жыл бұрын
Vielen Dank für das tolle Feedback! 🤩👍🐢
Hey you, We want a successful restoration Don't be late We are wating⏳⌚👍🇩🇿👍
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
I've seen a video before where they took a discount store knife and upgraded it. Maybe don't let the design go to waste, find the cheapest knife you can and give it a makeover.
@ForgottenShineRestoration
Жыл бұрын
mmh good idea 🤔🐢
Lamentablemente ahora eso es basura ya 😥
Это был ниндзя-нож. Если им пырнуть врага в спину, то враг скончается в страшных муках от зазубрин и ржавчины. Черепашка-ниндзя не даст соврать.
@ForgottenShineRestoration
Жыл бұрын
😅😅🐢
p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽ 👍
Tool just too far gone to restore? Just explain what was the plan for it and make a funny but short video. Definitely a good one
i like the camera shots from inside the machines. it reminds me of good eats. have you seen that show? i think youd like it ( ・∀・)
Bruh this knife is mud
It's rust all the way down.
@ForgottenShineRestoration
Жыл бұрын
You are definitely right! 🐢
More rust than a knife
@ForgottenShineRestoration
Жыл бұрын
Thats true! 😅🐢
İlk
@benyaminlakhi7044
Жыл бұрын
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
You should try to reforge it and make it something usable, poor Old knife😢
You really did a video about this? Now what, 1 more mount until the next one????
Wow, I think I got tetanus by just looking at that.
😕🔪
Fant🤢🙏👎
Send me that I restored 😅
Unfortunately the rust had already destroyed the knife... so he couldn't destroy it during his "restoration".
bad 😡
@marlenegutierrezsalazar6002
Жыл бұрын
No