Kings Thumper Max Compressor Fix. Repairing a Kings Thumper Max Compressor.
Жүктеу.....
Пікірлер: 37
@shauncooper99426 ай бұрын
Mate, thanks a whole heap for this tutorial. Even I can follow it. Crystal clear 👌. I've just got a new one and I'll be getting to know it, now I have a clue. Many thanks!!
@beersintheshed.
6 ай бұрын
Thanks for the nice comment. Cheers.
@stevemcg5606 Жыл бұрын
Well done mate your a handy bloke I reckon.
@beersintheshed.
Жыл бұрын
Thanks buddy, i like to help out when i can.
@ctipene722 Жыл бұрын
Help me a great deal thank you 👍🏿👍🏿
@steiny3353 Жыл бұрын
Watched your video, and thought "ahaa !! that's my problem" I raced out to get a pressure switch and couldn't get one anywhere, then just by luck they had them in "Autobarn" However, when i pulled my compressor apart, I didn't HAVE a pressure switch ! Someone in here said that they "upgraded" the pressure on the later models to a solid state affair, so that stuffed me. Now it's either buy a new one,Maybe NOT a double thumper from Kings, or look for something better.it was just out of warranty and hardly used, so they probably aren't the best option.
@adamconnolly7478
Ай бұрын
Same here, no pressure switch in mine!
@egor909 Жыл бұрын
I have the new Dual Thumper max 2, only used 4 times now it won't turn off, I've contacted them , no response , any ideas what could be wrong and how to fix, thinking it might be the inbuilt pressure switch.
@beersintheshed.
Жыл бұрын
Could be the pressure switch, its supose to turn off at 120psi unless its leaking air somewhere. Deff do a warrenty claim, its web bassed i think.
@milesabove5259 Жыл бұрын
Hey mate. As far as I can tell. These compressors are quite good mechanically? But fairly easy to modify the electrics for reliability. Do you agree?
@beersintheshed.
Жыл бұрын
100% buddy.
@brettseaborn91142 жыл бұрын
where did u get pressure switch from
@adamconnolly7478
Жыл бұрын
ebay bud
@ms767210 Жыл бұрын
Mine's barely 2 years old and same issue. They've updated the pressure switch to a solid state version but the hose between the sensor and the screw busted. That old mechanical switch looks more robust and yet it failed. I wonder if I get a replacement how long it will last. It really hasn't had a lot of use and always stored in shed when not in use.
@beersintheshed.
Жыл бұрын
If still under warrenty take it back
@roscored1000 Жыл бұрын
hi mine has no go issues, it was given to me for that reason, is there a model number to look for the pressure switch?
@beersintheshed.
Жыл бұрын
Just bypass the switch all togeather to see if thats the issue first, if it is just get something around 90/110, thats 90 closed / 110 open. No part number sorry.
@roscored1000
Жыл бұрын
@@beersintheshed. I have one ordered, thanks, to bypass the switch do you mean attach the two wires off it together?
@beersintheshed.
Жыл бұрын
@@roscored1000 yes
@roscored1000
Жыл бұрын
@@beersintheshed. well it worked like that, i had to use my car battery as it had more oomph, it ran for about 3 seconds then i stopped it, so at least it still spins, it wouldnt spin after that when i tried so not sure if that is normal, or may be a connection to the battery I used my jumper leads from the battery to the alligator clips. anyway it is probably worth going forward, there is a video of mods where the guy takes off all of the electronics and uses a continuous 300a relay only with a pressure switch.
@roscored1000
Жыл бұрын
added a pressure switch and just tried it again and it fires up nicely and pumps air so thats a win, I have switched it off and back on again and it worked again, but not the third time so baby steps. It wont switch on again, no matter what I threaten it with.
@scottcrawford7310 Жыл бұрын
Where do we get the replacement part
@steiny3353
Жыл бұрын
autobarn.
@robb92326 ай бұрын
What size is the thread
@beersintheshed.
6 ай бұрын
Im not sure sorry
@brettfelsman28368 ай бұрын
We’re did you buy the pressure relay?
@beersintheshed.
8 ай бұрын
I already had one but i just found one on ebay, 90/120 pressure switch is what you need. 90 on 120 off.
@moritz1267
2 ай бұрын
Would you know what thread it was ? I'm thinking that's my issue but I don't wanna pull it apart before buying a replacement . Also might be a silly question but how do you know which out of the two is positive and negative it doesn't matter ?@@beersintheshed.
@beersintheshed.
2 ай бұрын
@@moritz1267 sorry i dont know thread size, but its easy to pull apart, i do have the old one somewhere in the shed as i saw it the other day, ill try and find it again. In regards to the positive wire which ones are you talking about?
@moritz1267
2 ай бұрын
@@beersintheshed. Not a problem at all mate thanks anyways . I might just take it out and double check
@vcvnvcvn87082 жыл бұрын
Where did you get the pressure switch from ?
@beersintheshed.
2 жыл бұрын
I had it laying around but you can get them online and eBay
@beersintheshed.
2 жыл бұрын
I had it lying around but you can get them online
@umbrela_Corp Жыл бұрын
you done everything wrong, you have to delete the circuitry inside the blackhousing, and run cable 90 amp straight from battery
@beersintheshed.
Жыл бұрын
Your way wont have auto on/off
@lionelwilliams6327
6 ай бұрын
If stuck on the road you can simply jump the two terminals to bypass the pressure switch. Just be mindful that you don't blow a hose after that without a pressure switch.. Got one of the black ones and first use on a 40 degree day stopped for 20 minutes after one and a bit tyres. After a couple of more uses stopped completely. Left in garage for a few years and finally pulled it apart. It has two relays and one had a bad solder. Now working but not prepared to trust it even as my backup. Bought the original Bushranger max air over 20 years ago and still going. Never even shuts down for a break. Now have a Mean Mother adventurer 4 with a remote and love it. Simple rule is don't buy cheap with must have off road equipment. If you do they perhaps carry a solder kit.
Пікірлер: 37
Mate, thanks a whole heap for this tutorial. Even I can follow it. Crystal clear 👌. I've just got a new one and I'll be getting to know it, now I have a clue. Many thanks!!
@beersintheshed.
6 ай бұрын
Thanks for the nice comment. Cheers.
Well done mate your a handy bloke I reckon.
@beersintheshed.
Жыл бұрын
Thanks buddy, i like to help out when i can.
Help me a great deal thank you 👍🏿👍🏿
Watched your video, and thought "ahaa !! that's my problem" I raced out to get a pressure switch and couldn't get one anywhere, then just by luck they had them in "Autobarn" However, when i pulled my compressor apart, I didn't HAVE a pressure switch ! Someone in here said that they "upgraded" the pressure on the later models to a solid state affair, so that stuffed me. Now it's either buy a new one,Maybe NOT a double thumper from Kings, or look for something better.it was just out of warranty and hardly used, so they probably aren't the best option.
@adamconnolly7478
Ай бұрын
Same here, no pressure switch in mine!
I have the new Dual Thumper max 2, only used 4 times now it won't turn off, I've contacted them , no response , any ideas what could be wrong and how to fix, thinking it might be the inbuilt pressure switch.
@beersintheshed.
Жыл бұрын
Could be the pressure switch, its supose to turn off at 120psi unless its leaking air somewhere. Deff do a warrenty claim, its web bassed i think.
Hey mate. As far as I can tell. These compressors are quite good mechanically? But fairly easy to modify the electrics for reliability. Do you agree?
@beersintheshed.
Жыл бұрын
100% buddy.
where did u get pressure switch from
@adamconnolly7478
Жыл бұрын
ebay bud
Mine's barely 2 years old and same issue. They've updated the pressure switch to a solid state version but the hose between the sensor and the screw busted. That old mechanical switch looks more robust and yet it failed. I wonder if I get a replacement how long it will last. It really hasn't had a lot of use and always stored in shed when not in use.
@beersintheshed.
Жыл бұрын
If still under warrenty take it back
hi mine has no go issues, it was given to me for that reason, is there a model number to look for the pressure switch?
@beersintheshed.
Жыл бұрын
Just bypass the switch all togeather to see if thats the issue first, if it is just get something around 90/110, thats 90 closed / 110 open. No part number sorry.
@roscored1000
Жыл бұрын
@@beersintheshed. I have one ordered, thanks, to bypass the switch do you mean attach the two wires off it together?
@beersintheshed.
Жыл бұрын
@@roscored1000 yes
@roscored1000
Жыл бұрын
@@beersintheshed. well it worked like that, i had to use my car battery as it had more oomph, it ran for about 3 seconds then i stopped it, so at least it still spins, it wouldnt spin after that when i tried so not sure if that is normal, or may be a connection to the battery I used my jumper leads from the battery to the alligator clips. anyway it is probably worth going forward, there is a video of mods where the guy takes off all of the electronics and uses a continuous 300a relay only with a pressure switch.
@roscored1000
Жыл бұрын
added a pressure switch and just tried it again and it fires up nicely and pumps air so thats a win, I have switched it off and back on again and it worked again, but not the third time so baby steps. It wont switch on again, no matter what I threaten it with.
Where do we get the replacement part
@steiny3353
Жыл бұрын
autobarn.
What size is the thread
@beersintheshed.
6 ай бұрын
Im not sure sorry
We’re did you buy the pressure relay?
@beersintheshed.
8 ай бұрын
I already had one but i just found one on ebay, 90/120 pressure switch is what you need. 90 on 120 off.
@moritz1267
2 ай бұрын
Would you know what thread it was ? I'm thinking that's my issue but I don't wanna pull it apart before buying a replacement . Also might be a silly question but how do you know which out of the two is positive and negative it doesn't matter ?@@beersintheshed.
@beersintheshed.
2 ай бұрын
@@moritz1267 sorry i dont know thread size, but its easy to pull apart, i do have the old one somewhere in the shed as i saw it the other day, ill try and find it again. In regards to the positive wire which ones are you talking about?
@moritz1267
2 ай бұрын
@@beersintheshed. Not a problem at all mate thanks anyways . I might just take it out and double check
Where did you get the pressure switch from ?
@beersintheshed.
2 жыл бұрын
I had it laying around but you can get them online and eBay
@beersintheshed.
2 жыл бұрын
I had it lying around but you can get them online
you done everything wrong, you have to delete the circuitry inside the blackhousing, and run cable 90 amp straight from battery
@beersintheshed.
Жыл бұрын
Your way wont have auto on/off
@lionelwilliams6327
6 ай бұрын
If stuck on the road you can simply jump the two terminals to bypass the pressure switch. Just be mindful that you don't blow a hose after that without a pressure switch.. Got one of the black ones and first use on a 40 degree day stopped for 20 minutes after one and a bit tyres. After a couple of more uses stopped completely. Left in garage for a few years and finally pulled it apart. It has two relays and one had a bad solder. Now working but not prepared to trust it even as my backup. Bought the original Bushranger max air over 20 years ago and still going. Never even shuts down for a break. Now have a Mean Mother adventurer 4 with a remote and love it. Simple rule is don't buy cheap with must have off road equipment. If you do they perhaps carry a solder kit.