Killer B Equal Length Holy Headers on a 2015+ WRX STI

Ever wonder what's it like to daily drive a 2015+ STI with Equal Length (EL) Headers? In today's episode we take a look at my 2016 STI's Equal Length Headers setup, giving my impressions on what it's like to drive / race VS the stock STI Unequal Length (UEL) Headers. Prior to my EL setup, the following setup for my STI Stock UEL headers were as follows:
+++STI Stock UEL Headers Supporting Mods+++
- Stock Turbo
- Injector Dynamics ID1050x Injectors
- DeatschWerks "DW300" Fuel Pump
- Custom Fuel Rails
- Zeitronix Flex Fuel Kit
- INVIDIA Turbo-back Exhaust
- Process West Cold Air Intake
- Pierburg 3 Port Boost Contoller Solenoid
- Koyorad Hyper V Series Aluminium Racing Radiator
- Ryder Racing - Cylinder 4 Cooling Mod Kit
- Custom ECU Tune
+++KILLER B EL Holy Headers Supporting Mods+++
- Everything above
- Killer B Holy Headers w/ Up-Pipe - Swain Coated
- COBB Accessport v3
- Process West Top Mount Intercooler Kit
- GFB Mach 2 TMS Recirculating Diverter Valve T9103 (BPV)
- COBB Tuning Turbo Heat-shield
- Killer B High Flow Sump Package: Sump | Baffle | Pickup
- Process West Engine Oil Cooler Kit
- Custom Cobb AP Tune
Make sure to watch until the end for some sound clips!
⚠️ NOTE: This video is not sponsored.
⏱️TIMESTAMPS⏱️
00:00 Intro
01:17 Basic Exhaust Headers info
02:34 Caveats - Some supporting mods
02:57 Build goals
03:24 EL Headers Heat Management
03:54 My EL Headers
04:18 How EL Headers changed the car
05:37 EL Header Supplier and Insatller
05:56 Sound Clip - Cold Start
06:30 Sound Clip - Drive Bys
07:51 Sound Clip - Revs
08:10 Sound Clip - Roll Racing
08:35 Sound Clip - Track
10:05 Outro
The Killer B Equal Length 4-1 Holy Header was supplied and fitted by ‪@DCJapAutomotive‬ , their details below:
🕸 dcjapautomotive.com/
📸 / dcjapautomotive
Subscribe for more content of the 2016 WRX STI; daily driving, racing and casual car parts reviews:
👉 / @fam571
#wrxsti #sti #subaru #subienation #jdm #subaruwrxsti #subaruwrx #subieflow #killerbmotorsport #exhaust #exhaustsound #exhaustsounds #racing #rollrace #rollracing #circuitracing #trackday #trackdays

Пікірлер: 62

  • @JohnnyDiesel88
    @JohnnyDiesel888 ай бұрын

    Great and informative videos! I just picked up a killer b header for my 18 STi .. Im so stoked!!

  • @FAM571

    @FAM571

    8 ай бұрын

    Thanks mate! Appreciate the feedback and hope you enjoy your new headers!

  • @ronrosalesphotography6058
    @ronrosalesphotography60588 ай бұрын

    Awesome vid bro, informative!

  • @ChrisPlaysDG
    @ChrisPlaysDG7 ай бұрын

    I plan on upgrading to Equal Length on my 2007 WRX when i also upgrade to a bigger turbo and intercooler. As ive owned the car over the years, my opinion on EL Headers have changed. I like the aggressive and crisp note the EJ makes with EL headers.

  • @jcool9824
    @jcool98248 ай бұрын

    Great vid, thanks for sharing

  • @FAM571

    @FAM571

    8 ай бұрын

    Thanks for watching!

  • @guilhermemonteiro5276
    @guilhermemonteiro52767 ай бұрын

    This STi is beautiful! You could show us all the exterior changes that you did and all the upgrades too! Congrats for the car

  • @FAM571

    @FAM571

    6 ай бұрын

    Thank you! Will do an exterior mods video for sure!

  • @sonicewrxsti
    @sonicewrxsti2 ай бұрын

    Cooo video, Sydney based too by looks of it. You prob heard or seen mine around the socials. Came here looking up holy headers.. and was impressed!

  • @FAM571

    @FAM571

    2 ай бұрын

    Thanks mate, yeah Sydney based. Glad you liked the video!

  • @sonicewrxsti

    @sonicewrxsti

    2 ай бұрын

    @@FAM571 nice one, how’d you go at luddenham? Time wise and enjoyment ?

  • @FAM571

    @FAM571

    2 ай бұрын

    @sonicewrxsti Really enjoy luddenham, the last time we went I managed a 57.006 time, aiming for a 56 for the next time we go. You?

  • @sonicewrxsti

    @sonicewrxsti

    2 ай бұрын

    @@FAM571 first time last September 55.8 was best of efforts. 54s is goal next month. Just need tyres and not an 32 degree day tyres and temps soak suffer. Goodjob for getting into mid 50s!

  • @FAM571

    @FAM571

    2 ай бұрын

    @@sonicewrxsti that's a decent time!

  • @Stewie_STI
    @Stewie_STI7 ай бұрын

    I do have to say, one really big plus about the stock headers is spool time. If someone is thinking about upgrading to another set of uels from stock you will most definitely increase the time it takes for the turbo to spool because of the amount of piping the exhaust has to go through. I just got a set of killer b's though and I gotta say they still rumble just enough for me and I'm loving them more every day and not thinking about going back!

  • @FAM571

    @FAM571

    7 ай бұрын

    I'm the same man, there's enough of a rumble there to compensate, and agree, have not thought about going back.

  • @angelikihi158
    @angelikihi1588 ай бұрын

    Cool

  • @dreambiggarage
    @dreambiggarage11 күн бұрын

    I bought the killer b equal length header for my 2015sti and was the only thing I regretted putting on the car lol

  • @FAM571

    @FAM571

    2 күн бұрын

    Yeah it's not for everyone, but I'm certainly a fan!

  • @dreambiggarage

    @dreambiggarage

    Күн бұрын

    @@FAM571 ya to be far it’s more of an evo sound not a civic lol

  • @FAM571

    @FAM571

    Күн бұрын

    @@dreambiggarage 😆

  • @lucian7182
    @lucian71823 ай бұрын

    A sti with a good turbo back set up and ulh is probably the best sounding 4 cylinder in existence. Unfortunately the results speak for themselves when it comes to the issues with ulh. I’m getting a holy header installed next week. While I dont think it sounds better then ulh, I can appreciate the reliability aspect and the hp and tq gains through the rev range.

  • @FAM571

    @FAM571

    3 ай бұрын

    Coming from ulh and a good turbo back setup, I couldn't agree more with you, they sound amazing. But after being on the setup for a while, I decided reliability was more important than sound, and with the elh setup.

  • @dreambiggarage
    @dreambiggarage11 күн бұрын

    Should try port matching the oem manifold and getting a tune you’ll notice the same and equal length is definitely not more aggressive more Honda civic sounds maybe not aggressive lol

  • @FAM571

    @FAM571

    2 күн бұрын

    When I mentioend it being aggressive, that was in comparison to when I had the stock UEL setup, where I could feel the EL headers definitely made my car feel more aggressive and responsive when putting my foot down. Also disagree with it sounding like a Honda Civic but to each their own.

  • @voltes5830
    @voltes58308 ай бұрын

    The car is very shiny

  • @romasaldana
    @romasaldana8 ай бұрын

    Ganda ng sti mo

  • @FAM571

    @FAM571

    8 ай бұрын

    Thank you pare!

  • @gengiz
    @gengiz8 ай бұрын

    Hey bro thanks for video, I been trying to find a good workshop to do some performance mods and dyno tune but the one near me ichiban has terrible communication and does not even respond. Do you have any recommendations where I can take my 19 sti

  • @FAM571

    @FAM571

    8 ай бұрын

    Thank you! I recommend DCJAP, that's where I've been taking my car for servicing and car mod installs. For tuning, my car has been tuned by Ichiban, if you haven't already try giving them a call on their landline.

  • @legacy_smosh5162
    @legacy_smosh516227 күн бұрын

    Hey man, I’m not sure if you’ll see this but I live in Sydney and own a 2004 XT forester. I have in an ej257 that I am building for daily driving. I am only 16 atm so I can’t have too crazy of power but I have an intake, turbo back exhaust, vf43 turbo, wrx tmic, walbro fuel pump, sti injectors and a few more things. Recently bought el headers purely cause I like the sound but hoping to get some extra power out of it too. If by chance you see this, let me know what you think.

  • @FAM571

    @FAM571

    26 күн бұрын

    That sounds like a good build! I notice that you didn't mention much on the suspension front, if you're planning on tracking your car, a good set of coilovers, tyres, and a rear sway bar will go a long way!

  • @ramon4104
    @ramon41046 ай бұрын

    What’s ur current setup for downpipe did u go for the catted route or catless ?

  • @FAM571

    @FAM571

    6 ай бұрын

    I went with an Invidia catted down pipe.

  • @vince22222
    @vince222228 ай бұрын

    Bludy Bin chickens!

  • @FAM571

    @FAM571

    8 ай бұрын

    😂

  • @AngelRivera-ov6np
    @AngelRivera-ov6np7 ай бұрын

    Question how you have a levorg wagon bumper on a sedan sti car...is the same fitment?

  • @FAM571

    @FAM571

    7 ай бұрын

    Yes, same fitment; no modifications required to fit the front bumper.

  • @AngelRivera-ov6np

    @AngelRivera-ov6np

    7 ай бұрын

    @@FAM571 thank you so much for the info I appreciate it.🔥🔥🔥

  • @shoerotata9345
    @shoerotata93452 ай бұрын

    Hey mate were did you get your wing extension from .

  • @FAM571

    @FAM571

    2 ай бұрын

    Hey mate, you talking about the Perrin wing stabilisers? Or the STi gurney flap?

  • @shoerotata9345

    @shoerotata9345

    2 ай бұрын

    @@FAM571perrin wing stabilisers

  • @FAM571

    @FAM571

    2 ай бұрын

    @@shoerotata9345 Got them as a gift, but most places sell these like CMA, Prospeed and DCJAP.

  • @kameroncowan4867
    @kameroncowan48677 ай бұрын

    Where you get the front bumper from???

  • @FAM571

    @FAM571

    7 ай бұрын

    Unfortunately the shop I got it from is no longer operation. Japanparts (online store) is wherre I originally found them though.

  • @borowiak777
    @borowiak7773 ай бұрын

    Is tune required to swicth from unequal to equal?

  • @FAM571

    @FAM571

    3 ай бұрын

    Yes, definitely recommend getting a tune.

  • @monstertoaster
    @monstertoaster8 ай бұрын

    What bumper is that I’ve never seen it before?

  • @FAM571

    @FAM571

    8 ай бұрын

    It's from the Levorg STI Concept body set - will be doing a video on my exterior mods in future to cover this.

  • @Davesunga10
    @Davesunga107 ай бұрын

    Have you driven New VB?

  • @FAM571

    @FAM571

    7 ай бұрын

    No I haven't, not too keen on the looks though.

  • @guilhermemonteiro5276
    @guilhermemonteiro52767 ай бұрын

    What is the model of those tail lights?

  • @FAM571

    @FAM571

    6 ай бұрын

    These are Corazon taillights.

  • @michaeltaeza3662
    @michaeltaeza36628 ай бұрын

    Taillight info?

  • @FAM571

    @FAM571

    8 ай бұрын

    They're the CORAZON LED Tail lights. Planning on making a video on these to go through its features etc.

  • @Craiggg12345
    @Craiggg123456 ай бұрын

    Similar to my set up

  • @FAM571

    @FAM571

    6 ай бұрын

    Any differences? Would be interested to know!

  • @Craiggg12345

    @Craiggg12345

    6 ай бұрын

    @@FAM571I changed the header and turbo same time to killer b and a Cobb 20g. Miss the low end power but the new turbo gives me such nice top end. I love it.

  • @ihatestupidppl
    @ihatestupidppl7 ай бұрын

    The fact that you buy a 44k+ STI and it comes with shitty oem headers is just sad. I have a 20' STI with over 500+ hp and tq running on E85. I got the Tomei ELamd FP Red with Grimmspeed FMIC.

  • @FAM571

    @FAM571

    7 ай бұрын

    Nice! Tomei not really popular here, but keen to hear how your exhaust setup sounds! How are you finding front mount as opposed to top mount?

  • @PhillyPhan83
    @PhillyPhan8318 күн бұрын

    That lady said f**k your video 😂

  • @FAM571

    @FAM571

    17 күн бұрын

    😆