Kenworth Cabover "Krystal" Lets Run The Overhead & Rebuild Jakes.
Автокөліктер мен көлік құралдары
Join this channel to get access to perks:
/ @jamespretty
Don't Forget To Subscribe to Jessica's Marmon Channel @Makinitpretty
Partsam LED Lights www.partsam.com 10% off code jamespretty1
check us out on
www.jamespretty.shop and check out our merch
JamesPretty.inc
Pretty_Kool_Kustomz
www.tiktok.com/@JamesPretty.inc
Пікірлер: 136
Really educational James I’ve never seen the process of rebuilding jakes. Thanks for sharing
@JamesPretty
2 ай бұрын
Thanks for watching
Hey Jimmy! Nice job explaining and showing the Jake’s! Sorry about the ending. I hope it’s not going to be a bad or expensive fix. Keep up the good work on those beautiful trucks. Hope you feel better. Relax and catch yourself soon you can feel better.
@JamesPretty
2 ай бұрын
The only expense is time. I mean I screwed up, no excuses. I’ll most likely take the trans clutch and flywheel off, it’s a half days work and opens it up for more mistakes but I’m not in a hurry. I’ll let my mind work on a fix and see what happens
Thanks, James. Awesome video.👍👍👍 Sorry about that Penn debacle. But you’ll get it sorted out.
@JamesPretty
2 ай бұрын
Fingers crossed!
It does happen, nice job on the Jake's James!
@JamesPretty
2 ай бұрын
Thx Allen
Man Krystal is coming along nice brother, Hopefully everything will work out & not cost an arm & a leg, & You can drive & enjoy her.
@JamesPretty
2 ай бұрын
Thx brother
Great video James thanks for showing how to rebuild the Jake's and do the overhead on Krystal. Looking forward to your next video stay safe James.
@JamesPretty
2 ай бұрын
Thx Richard
Love the old iron 😊
@JamesPretty
2 ай бұрын
Me To Billy
I’m so sorry that happened brother I understand how you must feel you’ve worked so hard at this but I know one thing you’ll always make the best out of every situation that you’ve proven time and time again. Cheers brother. Keep the good videos coming I always look forward to seeing them
@JamesPretty
2 ай бұрын
Thx brother.
Nice, You and mama have a good weekend, James
@JamesPretty
2 ай бұрын
Thanks, you too!
Hi James I saw you flipping that switch and said to myself James didn’t unpin it. Thought you were gonna but you went to checking if it was in neutral. And said to myself again oh no this could be bad. Hopefully it’s not too bad to fix. Not sure what that would break hope the transmission doesn’t have to come out and flywheel be pulled and replaced. Sometimes bad luck is all we get. Stay safe
@JamesPretty
2 ай бұрын
Yep if I wasn’t sick I might have thought a couple more seconds before I hit that switch :/ I dunno. I haven’t fixed it yet. Just giving my mind time to figure it out
Another great job James..
@JamesPretty
2 ай бұрын
Thx bro
That looks like a loootttt of fun!
@JamesPretty
2 ай бұрын
lol Kinda. Hahaha
Fantastic video James really enjoyed the indepth explanation on Jakes...that dammed pin huh .f$#k.
@JamesPretty
2 ай бұрын
Thanks 👍
Dang it man! That pin left in sucks! I didn't realize Jakes would be that simple to rebuild, though.
@JamesPretty
2 ай бұрын
Yep Sucks
Dang it brother I hope you got it out. OK that was bad but things happen. You will figure it out. I hope you get feeling better, bro. Good job rebuilding the jake brakes keep up the hard work safe travels on the airplane captain
@JamesPretty
2 ай бұрын
Thx brother
Nice like the way you showed us on this video 😊
@JamesPretty
2 ай бұрын
thx bob
Yeah, I once forgot to remove the pin myself, Lucky for you your dad was'nt there. OH MAN did i get my arse crawled. We got it out, but my dad did it and i went inside and washed up, had a football game that night, so i aint much help in getting it out.lol
@JamesPretty
2 ай бұрын
it sucks but ill get it
I pulled trigger my back surgery yesterday to see my bud today. Man, that sucks about pin. You'll get it out. It happens to us all. I messed up my power steering pump on Monday. Appreciate ta Mr. Pretty
@JamesPretty
2 ай бұрын
appreciate ya being here.. Ill sort it out im sure
Like the tools your using to run the over head we're did you get them from never seen them before guess I need to park and walk around more often lol
@JamesPretty
2 ай бұрын
Snap on
Great video
@JamesPretty
Ай бұрын
Appreciate ya
Wow having the flu five times already and your alive that's amazing. I have never had convid and I have never been vaccinated either.
@JamesPretty
2 ай бұрын
Nice. I know maybe 5 unvaccinated people. I had to get it to keep my job
Take care be safe 🙏. Can't wait for the next one to see what happens
Nice truck
@JamesPretty
2 ай бұрын
Thanks 👍
Shoot James I hope you get her back on track.
@JamesPretty
2 ай бұрын
I will.
Thx James Saturday morning Jake school.
@JamesPretty
2 ай бұрын
Appreciate ya.
Hey James it's nice to do your own work hope you didn't cost yourself alot of money.
@JamesPretty
2 ай бұрын
the big expense is just time... I can fix it just gonna take most of a day
jake clearance is dependent on the engine horsepower, when you see all 12 point heads on the rocker hold down bolts you need the bolt update kit, a 9/16 distributor wrench works awesome on the jam nuts, i will update you with the clearance after i get my sheet that is at work on monday. if you have a cat book it should be in the specfications section,
@JamesPretty
2 ай бұрын
Rite on. In the jake kit it says 030 for 435 hp
Good beautiful morning y'all great day to be working on ol Krystal
@JamesPretty
2 ай бұрын
Good morning bro
Good Morning James perfect timing about to have breakfast at the Petro and watch the show hope your feeling better
@JamesPretty
2 ай бұрын
Bout 90%. Appreciate ya
class work james ya winning pal take care mick uk
@JamesPretty
2 ай бұрын
thx mick
Never rebuilt the Jake's on my cat are really any engine you make it look easy brother thanks thanks
@JamesPretty
2 ай бұрын
They aren’t too hard. But it’s time consuming
good evening james!
@JamesPretty
2 ай бұрын
good evening.
Good morning
@JamesPretty
2 ай бұрын
Good Morning bro
my trick to pining them is because i done that twice is to pin it then i had some soft wood dowels made up pin it then i put the wood in incase i forgot the pin again lol
@JamesPretty
2 ай бұрын
ya I usually tag the key with a do not Start but I didn't...
Hey good morning James
@JamesPretty
2 ай бұрын
Good Morning
James you got some sharp trucks
@JamesPretty
2 ай бұрын
Thx Billy
What do you plan to do with those trucks? Collect, run, or sell?
A mi tanbien megustan los camiones
Hey mate , good to see you getting well again. I recall you saying a little while ago about leaving her frame as patina, will you be putting clearcoat over it? Best wishes from Manchester England 🙏🏻
@JamesPretty
2 ай бұрын
Not 100% sure on that yet.
@nostreamavailable9090
2 ай бұрын
@@JamesPretty 🙏🏻🏴♥️🇺🇸
En puerto rico hace hartividade camiones en diferente parte del pais
Yep, sh^t happens no doubt like at the end of the video. If I had a dime for every time over the years myself...........
@JamesPretty
Ай бұрын
Yep. /:
Eres un duro en la mecanica sabe lo que hace
@JamesPretty
2 ай бұрын
thank you
I was yell'n Nooooooo,
@JamesPretty
2 ай бұрын
yep I wish I could have just spent a few more moments thinking before Turing the key. normally I tag the key with do not start.
I had the same problem with mine too. My cheap ones work better
@JamesPretty
2 ай бұрын
Rite on bro
Es una isla
Hi James are you feeling better ?
@JamesPretty
2 ай бұрын
Bout 90%. Thanks for asking
O man it happens brother sry guess I should watch all the video before I talk lol
@JamesPretty
2 ай бұрын
lol na it’s fine. I do the same thing
Dale una pintayta al chase
Great video, not so great at end for you. Sorry to see you forgot to unpin it. Cheers Mate.
@JamesPretty
2 ай бұрын
Thx brother
Belle vidéo 👌 😉 🚛 🚛
@JamesPretty
2 ай бұрын
Thx alain
@alaindunkerque59
2 ай бұрын
@@JamesPretty 😉 👍 🚛 🚛
Somo los unico q viajamos sin pasaporte
Puerto rico tienes 78 munisipio
Lo pusite al dia los camione
It was going so well, right up until the pin removal... or lack thereof. ☹
@JamesPretty
2 ай бұрын
Yep. Sucks being tired and trying to be done for the day. Mistakes happen exactly like that. I should have taken a minute or two to think
Ooooh! What a beggar!! I hope you can sort it out without too much hassle.
@JamesPretty
2 ай бұрын
me too... ill think on it a couple days.
Te saludo de puerto rico
@JamesPretty
2 ай бұрын
hi from Georgia
You sound all better fix Krystal beautiful truck tim
@JamesPretty
2 ай бұрын
thanks brother
Where did you get the jake brake rebuild kit???
@JamesPretty
Ай бұрын
Fitzgerald truck parts online
@jasoncody1537
Ай бұрын
@@JamesPretty thank you
Tu ley los comentario
Te veo todo los vide q hase
Don't forget to unpin it before you turn it over I've seen that before crazy but it happens
@JamesPretty
2 ай бұрын
Yep. Not Good
Avese veo q tu espasa te hayuda
Have you really had covid 5 times? I guess I am lucky since I have never took the jab and I haven't been sick once since covid started.
@JamesPretty
Ай бұрын
Yes I have. I travel around the world a couple times a month for work so I have a lot of exposure
No somo como los mexicano y como otro paise
Oh man that sucks big time.
@JamesPretty
2 ай бұрын
Yep. Self inflicted stuff always sucks
why you don't fix that when the engine was out lol
@JamesPretty
2 ай бұрын
What do you mean? The Jakes? I didn’t know they were bad until I ran the engine in this truck. I never tested them in the parts truck
De q estado vive
@JamesPretty
2 ай бұрын
Georgia
👋👍🇨🇿😉
Tu conose al colorao q tienes camiones como los tu es q no lese nombre😊
Noooooo unpin it James 😢
@JamesPretty
2 ай бұрын
:(
So tedious
@JamesPretty
2 ай бұрын
Yep it is bro. Appreciate ya being here
Good morning
@JamesPretty
2 ай бұрын
Good Morning