I want to use it for main pipe line which connects utility area for washing machine and for bathroom also. Water pressure sahi rahega ?

Can we use 6l small Kent softener for bathroom ( made for washing machine)??

Required fittings for dishwasher??

Have u changed the membrane now?

Very useful video thank you

Which salt to be used to regenerate the softner, any edible salt or only rock white salt, can I use tata iodine salt...am confused q ki rock salt puri tarah se dissolve nahi hota hai Pani me

@AshutoshExperience

Жыл бұрын

Any kind of salt

Thank you 💞 for this video 👍 very helpful video ☺️

@AshutoshExperience

2 жыл бұрын

Well come

Informative video.

bro can I use it for shower and gyser...water pressure sahi rahega na..

@AshutoshExperience

Жыл бұрын

Yes

5:50 we should not use salty water in plants. Though great video, recently purchased Dishwasher and hence bought 5L Kent softener after seeing this video review.

@AshutoshExperience

Жыл бұрын

Great tip!

I want to purchase one for my dishwasher and washing machine, what are you using it for.

@AshutoshExperience

Жыл бұрын

Go for 6 litres

I am hoping you are using rock salt and not table salt.

@AshutoshExperience

Жыл бұрын

I tried both.

bhai iske liye hame gyser or heater ka jarurat hai kya

@AshutoshExperience

Жыл бұрын

No

Amazing

Thanks again sir!

@AshutoshExperience

2 жыл бұрын

Most welcome!

Thank you

@AshutoshExperience

2 жыл бұрын

Welcome 🙏

Hi..What is ur inlet water TDs and outlet TDs?

@AshutoshExperience

2 жыл бұрын

900+

@jemsncrystals

2 жыл бұрын

@@AshutoshExperiencehe asked inlet tds and outlet tds and softness detail???

@johndoe-vc1we

Жыл бұрын

@@jemsncrystals still no answer 😐

I have purchased one, but water tastes salty after regeneration. Are you having the same problem? Also, the water gets really hard only after 3 days of regeneration. What is hardness of water at your end? At my place hardness is 850 .

@johndoe-vc1we

Жыл бұрын

How did you measure the hardness ?

@AshutoshExperience

Жыл бұрын

there is a kit come with some chemical. installation guy can bring if you ask them.

@nikhilmankars5994

Жыл бұрын

@@johndoe-vc1we I have purchased a kit from amazon called: AQUASOL Total Hardness Test Kit (50-1000 mg/L) -500 Tests

Sir mere yaha ka pani skin ko kala kar deta hai kya ye water softener usme kam karega skin ko kala hone se bachata hai kya please reply

@AshutoshExperience

9 ай бұрын

no idea

Have you tested the softness of the water ?

@AshutoshExperience

2 жыл бұрын

Yes

@jemsncrystals

2 жыл бұрын

@@AshutoshExperience plz share the hardness and tds after 1 year usage.

How much is the water hardness coming out of this according to the hardness test kit you have? And if you have tested TDS what is the figure

@AshutoshExperience

Жыл бұрын

It will not reduce tds

@johndoe-vc1we

Жыл бұрын

@@AshutoshExperience I understand that but i asked if you measured TDS and how much it was ?

@nikhilmankars5994

Жыл бұрын

@@johndoe-vc1we My hardness and TDS fluctuates between 700 to 850. We get mixture of ground water and lake water, hence this variation. Usually TDS value is slightly more than Hardness. Today I measured only TDS and it was 723. After each regeneration the hardness drops down to 100, but TDS stays same. (For me the water tastes salty after regeneration. Not sure why. Btw, water at tap where I don't have softener does not taste salty.) Anyways, this goes on for max 3 days, after which water is hard again and salty taste is gone. I am going to switch to crystal salt as the Kent Support person recommended and will see if I am still getting this issue, but he also said regeneration every 2-3 days is a common thing to expect for hardness above 550.

@johndoe-vc1we

Жыл бұрын

@@nikhilmankars5994 hi, thanks for the reply. The reason for the salty taste is you need to flush for a few minutes after regeneration. I think you need to open just the inlet tap and keep outlet facing up. There should be no salty taste after that. I'm glad you pointed out that TDS remained the same but the hardness dropped. Many don't understand this. The limit of this softener is 500 ppm so if your hardness is 700 then the best you can expect after regeneration is 200 ppm. The manual says for this unit regeneration has to be done after 1,200 litres. If that's how much you consume in 2-3 days then this is expected. Something you could try is when dissolving the salt to use low ppm water, RO or bottled water instead of tap water to mix the salt.

@nikhilmankars5994

Жыл бұрын

@@johndoe-vc1we Hi. Thank you for response. I really appreciate when people respond with such clarity. Here are few of my use observations. I am getting softness below 100 after regeneration, so I am happy with that. I have 2 person usage with softener in bathroom. Even if I account a generous use of 10 buckets of water usage per day. This barely gives me 150 liters of water usage per day. 3 days of usage will not be more than 450 liters, which is no where close to what the spec says. I am really not happy with this part. The flush (cleaning of salt) function is recommended for 3-5 mins. I have tried it from 3 mins to 10 mins of flush time but the water still tasted salty. Also FYI, I am using soft water for regeneration (i.e. not Hard). Basically I have 2 softeners and I use water from one to regenerate the other and vice-versa and that's how I have a regeneration schedule in place for each. Do I need to ensure it the regeneration water has low TDS too?

Hlo brother , two days back I had also bought this water softener after seeing ur video , I want to ask one thing that why this water is not completely removing soap from my hands after washing ,after washing hand with this water if I again rub my hands there is foam in my hands ,do u experience same issue ,please reply so I can call kent representative if there is any problem.

@AshutoshExperience

Жыл бұрын

It’s happening with me too

@AshutoshExperience

Жыл бұрын

No problem

@goldy6576

Жыл бұрын

@@AshutoshExperience hmm it need more rinsing, otherwise it is good

@suchitrapatane5094

Жыл бұрын

If it's not removing soap it means water is soft, hard water removes soap very quickly so it's actually a good news that you are experiencing that water is not removing soap

@nikhilmankars5994

Жыл бұрын

The soapy feeling is characteristic of too soft water. Even if you don't take any soap, soft water will give you that smooth slippery feeling. This happens immediately after regeneration. You can experience that after some usage that slippery feeling will go, that's where the water range is coming in good usable range where it feels good and is not hard too. But it wont last long, and will soon reach too hard. I think only way around this would be to perform frequent regenerations with less salt to stay within that good usable range.

Tds control hotahai isce?

@AshutoshExperience

Жыл бұрын

Nahii

Is there water wastage there like RO system?

@AshutoshExperience

2 жыл бұрын

No

@nikhilmankars5994

Жыл бұрын

Not like RO system, but some water gets wasted during regeneration.

Very helpful video

@AshutoshExperience

2 жыл бұрын

Glad it was helpful!

Hi, this was a helpful video. I'm planning to buy this product after your review. As my wife is facing hairfall and skin issue after using our house water. Before buying just wanted to know about the water pressure. Is there a big change in water pressure?

@AshutoshExperience

2 жыл бұрын

Yes pressure impact is there. But it's manageble. We are using dishwasher and washing machine

@jayamnadar1617

2 жыл бұрын

@@AshutoshExperience Great! So Is input pressure proportional to output pressure or it remains the same even if input pressure is increased.

@himanshujovi

2 жыл бұрын

I am suffering from drastic reduction in water pressure that too when living in a multistoreyed apartment

@kamalkumar987

Жыл бұрын

Don;t buy if you on rented house. If you stop using for 2 months its resin will vanish. it will corroded. Without resin it' just plastic body.

@jayamnadar1617

Жыл бұрын

@@kamalkumar987 Yeah its too late 😆, now i have replace the membrane and probably will send it to native where they use hardwater. Or if someone wants it i can sell it for reasonable price. As i havr used it only for 1 month

Good 👍

@AshutoshExperience

Жыл бұрын

Thanks

Pani unlimited use kr skte hai isko lgane ke baad

@AshutoshExperience

11 ай бұрын

no

How much liters water we can consume everyday by this softner

@kiranpreetkaur2482

2 жыл бұрын

Hi Anant, count my experience, this product will waste a lot of water just like RO, will need more salt than you think, will need regeneration everyday, I don't think that it gives more than 100 litres of water after each regeneration.

@AshutoshExperience

2 жыл бұрын

It goes two weeks

@johndoe-vc1we

Жыл бұрын

@@kiranpreetkaur2482 depends entirely on your hardness how long before regeneration. What is the hardness of your water? you need a hardness test kit not TDS meter

Sir mere water softener ko 3 din mehi regeneration karana pad raha he asa ku ho raha he plz help me sir

@AshutoshExperience

Жыл бұрын

No idea

softener ke andar membrane nahin Hoti resin Hoti hai sir

@AshutoshExperience

Жыл бұрын

Ohhh thanks

What's the price I need

@AshutoshExperience

2 жыл бұрын

Starting from 6k

Don’t use iodised salt in water softener it will destroy your resin.

@AshutoshExperience

3 ай бұрын

Ohhh thanks for letting me know

I am water softener manufacturer

@rahulshah6975

Жыл бұрын

kya ray hai apki iske bare me mujhe bhi ek chahiye mai ro dealer hu apna number do

Aapki sink ki halat bahut kharaab hai 😂😂😂😂

@AshutoshExperience

Жыл бұрын

Yes we replaced now

Mere softener ko 2 years hogye hai.. ab kya service krna hai can u please tell me

@AshutoshExperience

7 ай бұрын

Yes

@Prachi..75

3 ай бұрын

Soft water aa raha hei na ? Mein kharidne ka soch rahi hun