Thanks for the video! It worked! One tip for whoever decides to do this repair from the front: The top clamp is tough to get to because of the orientation of the ends. You can grab the hose clamp/hose and rotate slightly to orientate the clamp ends in an optimal position to clamp and remove.
@ScottTheFixItGuyChannel
6 күн бұрын
Great tip!👍😊
@creativedesignsbykesh7 ай бұрын
Thank you for your video! I fixed my washer by myself and am feeling very empowered!
@ScottTheFixItGuyChannel
7 ай бұрын
Wonderful!😊😊😊
@mattpeeler77662 жыл бұрын
Thanks for the video, ran into this same problem right as a guest (who my wife had to spend 20 minutes reassuring days earlier that we had a washer and she could wash clothes here) arrived from out of town. Needless to say she was less than thrilled but thanks to your video, i got it fixed asap.
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Matt😊👍
@cynthiawinston15942 жыл бұрын
Can’t Thank you enough!! Had a comforter & 2 light covers sitting in my washing machine for hours..now I’m back on the road again!’
@ScottTheFixItGuyChannel
2 жыл бұрын
Awesome, Thanks Cynthia😊
@lalala60198 ай бұрын
Thank you so much! It worked on my Elite Kenmore HE front loader!!
@ScottTheFixItGuyChannel
8 ай бұрын
Excellent, Thank you 😊
@alfredoechevarria21082 жыл бұрын
Awesome video! Had the same issue and this fixed it. Ended up taking the pump and hose out completely. Was completely filled with dirt and sludge.
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Alfredo
@delilahoheidhin6042 Жыл бұрын
This was great and helped me fix our washer in less than 30 minutes. We didn’t have to do the whole cleaning but it has worked great. Thank you! we
@ScottTheFixItGuyChannel
Жыл бұрын
Thanks Delilah❤️😊👍
@Nick-tl3jb2 жыл бұрын
Worked 100% thank you !!! Found coins and lots of dirt ! Saved money on technician !
@ScottTheFixItGuyChannel
2 жыл бұрын
I love it. Thanks Nick👍
@keydetjmo1615 ай бұрын
Thank you for this video. It saved us a call to the repairman!
@ScottTheFixItGuyChannel
5 ай бұрын
You're welcome!😊
@audacityhour31045 ай бұрын
2024 and this is still helpful... appreciate the vid
@ScottTheFixItGuyChannel
5 ай бұрын
You’re welcome 😊
@ryanhansard75473 жыл бұрын
Thanks your video helped me fix the problem with my washer!
@ScottTheFixItGuyChannel
3 жыл бұрын
Thanks Ryan👍
@tigeronabike2 ай бұрын
Excellently executed and narrated; I did a video of my own work on this and trashed it in the first minute of preview LOL. 😂
@ScottTheFixItGuyChannel
2 ай бұрын
Thanks so much😊👍
@LauraSaueracker8 ай бұрын
Thanks for the video. Hubby saved a $400 call out and found about $2.50. Washer back to perfect working order.
@ScottTheFixItGuyChannel
8 ай бұрын
That is excellent news😊😊😊
@mayamcbride319 Жыл бұрын
Thank you so much!!! Just fixed my washer machine and still trying to figure out of a sock got in the drain?!?! I will be cleaning the drain at least once a year this time! 😂
@ScottTheFixItGuyChannel
Жыл бұрын
Nice job Maya😊❤️👍
@scottjackman6682 Жыл бұрын
Found about $3.50 in that trap along with a huge ball of lint etc. After cleaning it worked better than ever. Will have to do that onc3 in awhile. Thanks I appreciate your video
@ScottTheFixItGuyChannel
Жыл бұрын
Great job Scott😊👍
@krismosich3773 Жыл бұрын
This was such a good help man thank you! The fact that you did this with a flashlight is incredible😮! Impeller was covered with a balloon……
@ScottTheFixItGuyChannel
Жыл бұрын
Nicely done 😊👍
@joseluciano78372 жыл бұрын
Outstanding KZread DIY video!!!🙌 Excellent step by step explanation, with many helpful insights! Scott's tone really helped one semi-stressed DIY'er attempt & execute the project!! 👏👏👏
@ScottTheFixItGuyChannel
2 жыл бұрын
Thanks so much Jose😊😊😊
@spankymcduff968310 ай бұрын
Tks for info...On our Kenmore the washer pump front bushing is toast/impeller is floppy causing intermittent F21 code. My wife would cycle the washer to get it to work...anyway, I ordered a pump motor....thanks again
@ScottTheFixItGuyChannel
10 ай бұрын
Excellent, Thank you👍😊
@AnthonySVarela4 ай бұрын
Great video. Easy to follow.
@ScottTheFixItGuyChannel
4 ай бұрын
You’re welcome 👍
@bdande Жыл бұрын
This is exactly what I needed! Thanks! Found a baby sock, it smelled awful
@ScottTheFixItGuyChannel
Жыл бұрын
I bet😂😂
@billypennrc22738 ай бұрын
Helped me a lot. Thank you!👍🏼
@ScottTheFixItGuyChannel
8 ай бұрын
You’re welcome😊
@dezfromtherez8718 Жыл бұрын
Thank you, I have had to open and clean front part a few times including replacing drain pump never thought to just remove the ball that is brilliant as I went thru cleaned the hoses put it back together but instantly had the error come back grrrrr... Thank you again!
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
@MsHarleydoggy8 ай бұрын
Thank you! Helped us today! Yeah!
@ScottTheFixItGuyChannel
8 ай бұрын
Happy to help!😊
@user-gk5rd8mo3o10 ай бұрын
Thanks! Seems to be back into business after watching you! It did take 2 people with that damn hose clamp!!😡
@ScottTheFixItGuyChannel
10 ай бұрын
Thanks Mary👍😊
@brandyb519 ай бұрын
Worked great, thanks for this!!
@ScottTheFixItGuyChannel
9 ай бұрын
You're welcome!😊
@chrisclifton83233 жыл бұрын
Super video! I applauded for $2.00 👏
@ScottTheFixItGuyChannel
3 жыл бұрын
Thanks so much
@user-sf9ye7ye8u10 ай бұрын
Hey thank you. Easy fix the trap was full of coins, hair elastics, and all sorts of crap. saved us downtime and a costly repair bill.
@ScottTheFixItGuyChannel
10 ай бұрын
Excellent, Thank you 👍😊
@Chirch114 ай бұрын
Thanks for this!
@ScottTheFixItGuyChannel
4 ай бұрын
My pleasure!😊😊😊
@ippothedestroyer17 ай бұрын
It worked for me. Just cleaned the drain plug. It was clogged. It was alot of water though like about half a gallon or more.
@brandonrauls38752 жыл бұрын
Very helpful thank you
@ScottTheFixItGuyChannel
2 жыл бұрын
You’re very welcome😊
@mysfyt61712 жыл бұрын
My washer did the same and I already removed that ball and cleaned all the hoses but I still get the f21 error code
@AJ-qp5nx2 жыл бұрын
Thank you this did the trick!
@user-wm6lv9uw8j Жыл бұрын
Thank God for you, you really opened my eyes to fixed the machine, but still having the same issue even with the ball removal and the pump is pumping.i just don't get it
@ScottTheFixItGuyChannel
Жыл бұрын
I wonder if there’s something caught right where the drain tube connects to the drain pump?
@keepitsimple8
8 ай бұрын
Might be the water pressure air trap.
@dk21402 жыл бұрын
I'm gonna try mine tomorrow... Hopefully it will fix it
@ScottTheFixItGuyChannel
2 жыл бұрын
Please let us know how it goes👍
@munchkind75 Жыл бұрын
Awesome video! ... since our F21 errors are intermittent, I've gone for the full solution, and was able to take the hose off and remove the ball but I'm having trouble getting a wrench in to open the spring hose clamp so I can put the large hose back (you mentioned this was the toughest part of the job). I've been searching for a type of hose pliers that I can buy that open wide enough (~3 1/2"), and that lock or ratchet. Do you have any suggestions for particular products that will work?
@ScottTheFixItGuyChannel
Жыл бұрын
I wonder if large vice groups would work?
@LiquidLiik
Жыл бұрын
I ran into the same issue and I happened to be using some rubber gloves at the time (to keep my hands from getting dirty) so I just took one of the gloves and slide the fingers over the pliers and that give me much grip to grab the clamp and secure back in place
@jbradmcpherson Жыл бұрын
Great video Scott. Thanks for the great job! I have a question. You mentioned removing the ball and that it was for efficiency. But my understanding is that the ball is a check valve designed to prevent water from the pump flowing back into the tub when the pump is running. I always subscribe to the less-is-more theory with anything mechanical, except when something is there to prevent a problem. So, my question is: have you had any issues with tubs not draining completely and increased mildew smell due to increased standing water in the tub after the ball has been removed? BTW, I have mine apart right now, so would love to get your answer before I put it all back together :) Thanks in advance!
@ScottTheFixItGuyChannel
Жыл бұрын
Great question, I would leave it out. Most other brands have the same set up but don’t use the ball. It just creates trouble when it gets stuck👍
@eddiegonz2 жыл бұрын
We’re you able to find out why the propeller was so hard to spin? Did you fix it or replace it?
@emiliemann44082 жыл бұрын
Hi Scott! Can you clarify which clamp you used in this video to constrict the metal piece over the rubber tube? Having a hard time putting it back in place. Thanks!
@ScottTheFixItGuyChannel
2 жыл бұрын
Hi Emile, Can you send that same question tic my email: scottthefixitguy@yahoo.com
@steveisaak43202 ай бұрын
i can’t seem to get the piece to tighten it back up. tighten med it as much as I could
@ScottTheFixItGuyChannel
2 ай бұрын
Thanks Steve, Do you think there’s any water still in the washer?
@steveisaak4320
2 ай бұрын
@@ScottTheFixItGuyChannel I don’t know. I have a home warranty so I called Old Republic. It is a very old washer , 15 or so years old, I may take the panel off and have another look. When I tried to screw in the part I could not get it as tight as it was before
@steveisaak4320
2 ай бұрын
@@ScottTheFixItGuyChannel just took the panel off. used a flashlight there is something else in there. The clamp is on the hose too tight
@joycewalters7228 ай бұрын
Any other suggestions. We completed as described. Still getting F21. Any other ideas?
@ScottTheFixItGuyChannel
8 ай бұрын
Probably time for a new motor controller.
@cowboypatriot12002 жыл бұрын
Sweet , this just saved me in two ways . 1 is my wife and 2 is my wallet .
@cowboypatriot1200
2 жыл бұрын
I have a question , sometimes the little door that directs the water from soap to softener (where you add the laundry detergent) will make a clicking/skipping noise like the arm that moves the door from soap to softener is skipping . Do you have any videos on that or any recommendations . I have the top of the washer off and when that happens I can help that arm by putting a little pressure on it and then it will switch .
@ScottTheFixItGuyChannel
2 жыл бұрын
Can you see a way of keeping that plastic gear down as it turns so it won’t skip? Maybe slightly melting the top of the plastic axle with a soldering gun?
@cowboypatriot1200
2 жыл бұрын
@@ScottTheFixItGuyChannel hmmm ill have to try that , ill let you know how things turn out . Thanks again 👍
@TheOldMayfieldPlace Жыл бұрын
So we did this and took the ball out and were able to turn the pump through the little hole. We are still getting errors at about 13 minutes left either "SUD", "F21" or "F25". Do you think changing out the pump will fix the problem? Thanks!
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
@markcaplinger152717 күн бұрын
Do you know why I’m getting a SUD code when I try to run a cleaning cycle? I changed the pressure switch due to a different issue and now I’m getting this.
@ScottTheFixItGuyChannel
16 күн бұрын
Usually it’s from too much detergent or not using HE detergent.
@markcaplinger1527
16 күн бұрын
@@ScottTheFixItGuyChannel but I’m not putting any soap in it. I’m just trying to run a cleaning cycle, I’m not even putting bleach in it.
@emilyskaggs47862 жыл бұрын
I hope this works, however there was not just 2 cups of water, it was 4 gallons of water🥴
@ScottTheFixItGuyChannel
2 жыл бұрын
Wow, that’s a lot of water🙀
@thejoeruizjr
2 жыл бұрын
Yea mine was completely full!
@rjmonty4134
Жыл бұрын
This…. So much water….
@LastOneLeftt
Жыл бұрын
If that ever happens again. That’s a sign your pump motor is struggling. Drain pipe could have been too high.. over time that makes your pump weak. It’ll drain the water out the tub. But it’ll just be sitting in the basket on the weak pump🙃 same with dryer.. ventilation should never been too far. Save a lot of time and money when u don’t over work your motors
@richardstone1816 Жыл бұрын
Ya a code F 20 on the Kenmore front loading washer with a bottom door.
@pamelabracken85502 жыл бұрын
Hose clamp pliers? Are they a plumbing tool?
@ScottTheFixItGuyChannel
2 жыл бұрын
Hi Pamela, Here you are : www.gearwrench.com/products/pliers/specialty/3793-large-hose-pinch-pliers-2-12-od-capacity
@FamAdventures
2 жыл бұрын
Thanks so much. It’s a great video. I didn’t have the tool suggested - so I swapped out the existing clamp with one of those that you screw closed. Hopefully it holds at least until I can find a washing machine that has a drain hose longer than 4’. Any ideas? Thanks again!
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
@@FamAdventures you can add drain hose to your 4 foot hose to make it run longer.
@FamAdventures
2 жыл бұрын
@@QuickAndEasy5MinuteAppliance Thanks again - LG doesn't recommend extending the hose, they say that the pump wouldn't be strong enough. Anyway, my hunt for a new washer / dryer continues. Thank you so much for your help in repairing my current washer. It's been repaired so many times that I think I'm living on borrowed time.
@nuida88327 ай бұрын
Thank you... 👍
@ScottTheFixItGuyChannel
7 ай бұрын
You’re welcome 😊
@QueenDoubleB2 жыл бұрын
I fixed my moms washer watching this
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Irene❤️😊👍
@rhondasampson30322 жыл бұрын
Now that we removed the plastic ball, our washer is making a lot of noise and we are still getting the F21 error code. Any suggestions?
@sgtbilkothe3rd
Жыл бұрын
Replace drain pump possibly. Remove panel and try to run a rinse and drain cycle and see if the noise is coming from the drain pump.
@user-wm6lv9uw8j Жыл бұрын
What happens when you do all that and still have the F21 code
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
@keepitsimple8
8 ай бұрын
If the pump still pumps water, check the water pressure air trap.
Пікірлер: 111
Thanks for the video! It worked! One tip for whoever decides to do this repair from the front: The top clamp is tough to get to because of the orientation of the ends. You can grab the hose clamp/hose and rotate slightly to orientate the clamp ends in an optimal position to clamp and remove.
@ScottTheFixItGuyChannel
6 күн бұрын
Great tip!👍😊
Thank you for your video! I fixed my washer by myself and am feeling very empowered!
@ScottTheFixItGuyChannel
7 ай бұрын
Wonderful!😊😊😊
Thanks for the video, ran into this same problem right as a guest (who my wife had to spend 20 minutes reassuring days earlier that we had a washer and she could wash clothes here) arrived from out of town. Needless to say she was less than thrilled but thanks to your video, i got it fixed asap.
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Matt😊👍
Can’t Thank you enough!! Had a comforter & 2 light covers sitting in my washing machine for hours..now I’m back on the road again!’
@ScottTheFixItGuyChannel
2 жыл бұрын
Awesome, Thanks Cynthia😊
Thank you so much! It worked on my Elite Kenmore HE front loader!!
@ScottTheFixItGuyChannel
8 ай бұрын
Excellent, Thank you 😊
Awesome video! Had the same issue and this fixed it. Ended up taking the pump and hose out completely. Was completely filled with dirt and sludge.
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Alfredo
This was great and helped me fix our washer in less than 30 minutes. We didn’t have to do the whole cleaning but it has worked great. Thank you! we
@ScottTheFixItGuyChannel
Жыл бұрын
Thanks Delilah❤️😊👍
Worked 100% thank you !!! Found coins and lots of dirt ! Saved money on technician !
@ScottTheFixItGuyChannel
2 жыл бұрын
I love it. Thanks Nick👍
Thank you for this video. It saved us a call to the repairman!
@ScottTheFixItGuyChannel
5 ай бұрын
You're welcome!😊
2024 and this is still helpful... appreciate the vid
@ScottTheFixItGuyChannel
5 ай бұрын
You’re welcome 😊
Thanks your video helped me fix the problem with my washer!
@ScottTheFixItGuyChannel
3 жыл бұрын
Thanks Ryan👍
Excellently executed and narrated; I did a video of my own work on this and trashed it in the first minute of preview LOL. 😂
@ScottTheFixItGuyChannel
2 ай бұрын
Thanks so much😊👍
Thanks for the video. Hubby saved a $400 call out and found about $2.50. Washer back to perfect working order.
@ScottTheFixItGuyChannel
8 ай бұрын
That is excellent news😊😊😊
Thank you so much!!! Just fixed my washer machine and still trying to figure out of a sock got in the drain?!?! I will be cleaning the drain at least once a year this time! 😂
@ScottTheFixItGuyChannel
Жыл бұрын
Nice job Maya😊❤️👍
Found about $3.50 in that trap along with a huge ball of lint etc. After cleaning it worked better than ever. Will have to do that onc3 in awhile. Thanks I appreciate your video
@ScottTheFixItGuyChannel
Жыл бұрын
Great job Scott😊👍
This was such a good help man thank you! The fact that you did this with a flashlight is incredible😮! Impeller was covered with a balloon……
@ScottTheFixItGuyChannel
Жыл бұрын
Nicely done 😊👍
Outstanding KZread DIY video!!!🙌 Excellent step by step explanation, with many helpful insights! Scott's tone really helped one semi-stressed DIY'er attempt & execute the project!! 👏👏👏
@ScottTheFixItGuyChannel
2 жыл бұрын
Thanks so much Jose😊😊😊
Tks for info...On our Kenmore the washer pump front bushing is toast/impeller is floppy causing intermittent F21 code. My wife would cycle the washer to get it to work...anyway, I ordered a pump motor....thanks again
@ScottTheFixItGuyChannel
10 ай бұрын
Excellent, Thank you👍😊
Great video. Easy to follow.
@ScottTheFixItGuyChannel
4 ай бұрын
You’re welcome 👍
This is exactly what I needed! Thanks! Found a baby sock, it smelled awful
@ScottTheFixItGuyChannel
Жыл бұрын
I bet😂😂
Helped me a lot. Thank you!👍🏼
@ScottTheFixItGuyChannel
8 ай бұрын
You’re welcome😊
Thank you, I have had to open and clean front part a few times including replacing drain pump never thought to just remove the ball that is brilliant as I went thru cleaned the hoses put it back together but instantly had the error come back grrrrr... Thank you again!
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Thank you! Helped us today! Yeah!
@ScottTheFixItGuyChannel
8 ай бұрын
Happy to help!😊
Thanks! Seems to be back into business after watching you! It did take 2 people with that damn hose clamp!!😡
@ScottTheFixItGuyChannel
10 ай бұрын
Thanks Mary👍😊
Worked great, thanks for this!!
@ScottTheFixItGuyChannel
9 ай бұрын
You're welcome!😊
Super video! I applauded for $2.00 👏
@ScottTheFixItGuyChannel
3 жыл бұрын
Thanks so much
Hey thank you. Easy fix the trap was full of coins, hair elastics, and all sorts of crap. saved us downtime and a costly repair bill.
@ScottTheFixItGuyChannel
10 ай бұрын
Excellent, Thank you 👍😊
Thanks for this!
@ScottTheFixItGuyChannel
4 ай бұрын
My pleasure!😊😊😊
It worked for me. Just cleaned the drain plug. It was clogged. It was alot of water though like about half a gallon or more.
Very helpful thank you
@ScottTheFixItGuyChannel
2 жыл бұрын
You’re very welcome😊
My washer did the same and I already removed that ball and cleaned all the hoses but I still get the f21 error code
Thank you this did the trick!
Thank God for you, you really opened my eyes to fixed the machine, but still having the same issue even with the ball removal and the pump is pumping.i just don't get it
@ScottTheFixItGuyChannel
Жыл бұрын
I wonder if there’s something caught right where the drain tube connects to the drain pump?
@keepitsimple8
8 ай бұрын
Might be the water pressure air trap.
I'm gonna try mine tomorrow... Hopefully it will fix it
@ScottTheFixItGuyChannel
2 жыл бұрын
Please let us know how it goes👍
Awesome video! ... since our F21 errors are intermittent, I've gone for the full solution, and was able to take the hose off and remove the ball but I'm having trouble getting a wrench in to open the spring hose clamp so I can put the large hose back (you mentioned this was the toughest part of the job). I've been searching for a type of hose pliers that I can buy that open wide enough (~3 1/2"), and that lock or ratchet. Do you have any suggestions for particular products that will work?
@ScottTheFixItGuyChannel
Жыл бұрын
I wonder if large vice groups would work?
@LiquidLiik
Жыл бұрын
I ran into the same issue and I happened to be using some rubber gloves at the time (to keep my hands from getting dirty) so I just took one of the gloves and slide the fingers over the pliers and that give me much grip to grab the clamp and secure back in place
Great video Scott. Thanks for the great job! I have a question. You mentioned removing the ball and that it was for efficiency. But my understanding is that the ball is a check valve designed to prevent water from the pump flowing back into the tub when the pump is running. I always subscribe to the less-is-more theory with anything mechanical, except when something is there to prevent a problem. So, my question is: have you had any issues with tubs not draining completely and increased mildew smell due to increased standing water in the tub after the ball has been removed? BTW, I have mine apart right now, so would love to get your answer before I put it all back together :) Thanks in advance!
@ScottTheFixItGuyChannel
Жыл бұрын
Great question, I would leave it out. Most other brands have the same set up but don’t use the ball. It just creates trouble when it gets stuck👍
We’re you able to find out why the propeller was so hard to spin? Did you fix it or replace it?
Hi Scott! Can you clarify which clamp you used in this video to constrict the metal piece over the rubber tube? Having a hard time putting it back in place. Thanks!
@ScottTheFixItGuyChannel
2 жыл бұрын
Hi Emile, Can you send that same question tic my email: scottthefixitguy@yahoo.com
i can’t seem to get the piece to tighten it back up. tighten med it as much as I could
@ScottTheFixItGuyChannel
2 ай бұрын
Thanks Steve, Do you think there’s any water still in the washer?
@steveisaak4320
2 ай бұрын
@@ScottTheFixItGuyChannel I don’t know. I have a home warranty so I called Old Republic. It is a very old washer , 15 or so years old, I may take the panel off and have another look. When I tried to screw in the part I could not get it as tight as it was before
@steveisaak4320
2 ай бұрын
@@ScottTheFixItGuyChannel just took the panel off. used a flashlight there is something else in there. The clamp is on the hose too tight
Any other suggestions. We completed as described. Still getting F21. Any other ideas?
@ScottTheFixItGuyChannel
8 ай бұрын
Probably time for a new motor controller.
Sweet , this just saved me in two ways . 1 is my wife and 2 is my wallet .
@cowboypatriot1200
2 жыл бұрын
I have a question , sometimes the little door that directs the water from soap to softener (where you add the laundry detergent) will make a clicking/skipping noise like the arm that moves the door from soap to softener is skipping . Do you have any videos on that or any recommendations . I have the top of the washer off and when that happens I can help that arm by putting a little pressure on it and then it will switch .
@ScottTheFixItGuyChannel
2 жыл бұрын
Can you see a way of keeping that plastic gear down as it turns so it won’t skip? Maybe slightly melting the top of the plastic axle with a soldering gun?
@cowboypatriot1200
2 жыл бұрын
@@ScottTheFixItGuyChannel hmmm ill have to try that , ill let you know how things turn out . Thanks again 👍
So we did this and took the ball out and were able to turn the pump through the little hole. We are still getting errors at about 13 minutes left either "SUD", "F21" or "F25". Do you think changing out the pump will fix the problem? Thanks!
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
Do you know why I’m getting a SUD code when I try to run a cleaning cycle? I changed the pressure switch due to a different issue and now I’m getting this.
@ScottTheFixItGuyChannel
16 күн бұрын
Usually it’s from too much detergent or not using HE detergent.
@markcaplinger1527
16 күн бұрын
@@ScottTheFixItGuyChannel but I’m not putting any soap in it. I’m just trying to run a cleaning cycle, I’m not even putting bleach in it.
I hope this works, however there was not just 2 cups of water, it was 4 gallons of water🥴
@ScottTheFixItGuyChannel
2 жыл бұрын
Wow, that’s a lot of water🙀
@thejoeruizjr
2 жыл бұрын
Yea mine was completely full!
@rjmonty4134
Жыл бұрын
This…. So much water….
@LastOneLeftt
Жыл бұрын
If that ever happens again. That’s a sign your pump motor is struggling. Drain pipe could have been too high.. over time that makes your pump weak. It’ll drain the water out the tub. But it’ll just be sitting in the basket on the weak pump🙃 same with dryer.. ventilation should never been too far. Save a lot of time and money when u don’t over work your motors
Ya a code F 20 on the Kenmore front loading washer with a bottom door.
Hose clamp pliers? Are they a plumbing tool?
@ScottTheFixItGuyChannel
2 жыл бұрын
Hi Pamela, Here you are : www.gearwrench.com/products/pliers/specialty/3793-large-hose-pinch-pliers-2-12-od-capacity
@FamAdventures
2 жыл бұрын
Thanks so much. It’s a great video. I didn’t have the tool suggested - so I swapped out the existing clamp with one of those that you screw closed. Hopefully it holds at least until I can find a washing machine that has a drain hose longer than 4’. Any ideas? Thanks again!
@QuickAndEasy5MinuteAppliance
2 жыл бұрын
@@FamAdventures you can add drain hose to your 4 foot hose to make it run longer.
@FamAdventures
2 жыл бұрын
@@QuickAndEasy5MinuteAppliance Thanks again - LG doesn't recommend extending the hose, they say that the pump wouldn't be strong enough. Anyway, my hunt for a new washer / dryer continues. Thank you so much for your help in repairing my current washer. It's been repaired so many times that I think I'm living on borrowed time.
Thank you... 👍
@ScottTheFixItGuyChannel
7 ай бұрын
You’re welcome 😊
I fixed my moms washer watching this
@ScottTheFixItGuyChannel
2 жыл бұрын
Nice job Irene❤️😊👍
Now that we removed the plastic ball, our washer is making a lot of noise and we are still getting the F21 error code. Any suggestions?
@sgtbilkothe3rd
Жыл бұрын
Replace drain pump possibly. Remove panel and try to run a rinse and drain cycle and see if the noise is coming from the drain pump.
What happens when you do all that and still have the F21 code
@ScottTheFixItGuyChannel
Жыл бұрын
Great Question👍 Click Here to Get Live Expert Help From Me For Just $5.00: kzread.info/dron/7fBqy8806u1r0NpPv_fQ2w.htmljoin
@keepitsimple8
8 ай бұрын
If the pump still pumps water, check the water pressure air trap.
the door won’t open it is still locked up
F 20