Kenmore 70 series agitator repair
Тәжірибелік нұсқаулар және стиль
I noticed that my washing machine was making a strange noise, and when I opened the lid I saw that the agitator was behaving erratically, and essentially not functioning. It was a quick and cheap repair using the parts linked below.
Agitator Dogs (affiliate link) 🔗 amzn.to/3kBDmxg
➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖➖
If this helped you out and you'd like to show your appreciation, donations are accepted :
💲 www.paypal.com/donate?hosted_...
Пікірлер: 44
Great video! Replaced these while replacing the motor coupler on my washer. Both were disentigrated and washer was a paperweight becuase of the coupler... Now the washer purs like a cat. 👍
Thank you very much. I’ve had kenmore 70 series for 25 years. Still kicking it because of you. Works amazing.
@gamerforlife6682
2 жыл бұрын
Got the parts in. Turns to right and teeth grab with turn to left. That was an issue, but not entire issue. The motor spline stem the unit sits on is turning slowly. Maybe it’s finally trash. Whole agitator at bottom also does not turn at bottom.
@CaptNemo_
Жыл бұрын
am really sad that i have to let go of my moms old kenmore 70 series heavy duty, i really like how it takes less time to wash and it actually turns the clothes around, not like the new impellers
@gamerforlife6682
Жыл бұрын
@@CaptNemo_ these are not hard to fix if that is a consideration.
This video was amazing, I found it to see why my agitator wasn't working correctly and in no time I had it working like new. I have an appliance parts store that's only about a mile away and the price of the dogs was only about a dollar more than ordering them online. The other thing that was amazing is the washer and dryer in the video were the exact ones that we have! Also, the tile on the floor in front of the washer and dryer is the exact same thing that we have!!! That video could have been done in our laundry room, I wish I could add a picture. Thanks, Jim
Thank you, sir! Love my Kenmore washer and it has served me well for over thirty years until I needed to fix this.
Got the job done in half an hour (including cleaning) after finding this video. I’ll take a $12 part replacement over buying a new machine any day! Thanks for the great video Dustin
Great video 👍👍 my dogs were in a million pieces. Thanks for showing us the fix.
This is my absolute favorite washer. Old school is wayyyyy better than the new junk.
Thank you for the video, I was able to fix my machine for 10 bucks 👍🏻
This video was sooo helpful and solved our washing machine problems. Thank you so much!
Thanks for the great video Dustin. I was able to fix my washer no problem. And im a 65 yr old woman. 👍
@DustinRogersinMO
2 жыл бұрын
Sweet. Glad you got it fixed.
Thank you for this!!! Got our washer fixed in no time!
Thanks. 5.30$ and 10 minutes of work saved me from having to buy a new washer!
Tyvm man, I knew this couldn't have been too hard a fix...... my dumbass was stuck on the cap of the agitator, didn't even think it was a pry cap so tyvm sir
All 4 of my dog agits were gone 😳 There was 1 tiny piece left….I bet it’s been broken for years ‼️ Thanks so much 😊
THANK YOU THANK YOU I DIDN’T EVEN KNOW I LOST THE RUBBER PEICES UNTIL I SAW THIS VID
@carloscorrea3191
6 ай бұрын
ALSO I SPENT AN HOUR TRYING TO FIND A HELPFUL VID
Exactly the issue I was looking for !! I am certain it will be this exact repair solution ... thank you for posting !!
thanks for this. I fixed mine today with these instructions.
@DustinRogersinMO
9 ай бұрын
Awesome. Thanks for watching
Thank you.
Thanks for your helpful video! Specially for a person on fix income.
Great video. Thank you for saving me money 💰.
Thank you....
This video is a great tutorial, thanks!
We used to have a used model just like that and the agitator was starting to act like that one but the motor let out the magic blue smoke before i had a chance to fix it and i never did see how it works. Thanks for the info.
We have same Kenmore washer and dryer set. There about 30 years old but still work. Have done some of the same repairs. All these parts are still sold on ebay at a fraction of local stores.
I just ordered some dogs. Before i install them, im scanning them so i will have them to reprint if i ever need any.
Great video sir
@DustinRogersinMO
2 жыл бұрын
Thanks for watching
Hello Dustin! Thank you for making this video. My little plastic pieces were pretty bad and you really made it easy for me to do. I do have a question, do you have a video on how to work/fix the bottom agitator? Mine still will not turn from the base. I read where it might be the belt or coupler to the transmission. Any thoughts on that? Thank you for your time!
@DustinRogersinMO
2 жыл бұрын
There is a coupler between the motor and the transmission which is a common failure component. It’s a cheap part (amzn.to/3HuO0jn), but unfortunately I don’t have a video on replacing that. I know there are some videos on KZread showing the process. It’s possible it could be a transmission issue too, and there are a few transmission rebuild videos available. The kit for that (amzn.to/3qJezKW) comes with the parts that typically wear out in these transmissions.
I don't have a bolt in mine. There is a smooth metal circle at the bottom of the shaft, but no bolt or screw head. Is there an older model design? Every video says undo the bolt. It doesn't look like anything was broken off.
@starrionx1
9 ай бұрын
So my assembly was square and screwed onto a bolt that was underneath the basket. I had to MacGyver a square approximately 3/4" to break the cage loose, and I was then able to proceed with a successful repair.
Hello everyone...I repaired my agitator dogs and it was working fine..few days later same problem...I check and the dogs are fine and counter clockwise the catch and do what they are designed to do...can anyone tell me what else can be the likely problem I appreciate you all so kindly
I’m trying to fix the bottom agitator. It’s under the washer I guess I got to see what’s going on. My agitator is only wanting to go one way not back-and-forth
How long did they make the 70 series with the dark tub,?Like what year did they start.
@DustinRogersinMO
6 ай бұрын
No idea
You can just order agitator assembly and be one and done for these machines.
Put new dogs in but still isn’t agitating correctly don’t know what I’ve done wrong.
@AT-bd5yr
10 ай бұрын
Did u ever get it fixed?