This video is about installing LED turn signals on a 2013-2017 Ninja 300
Жүктеу.....
Пікірлер: 16
@BreakingBarriers2DIY3 жыл бұрын
You are supremely talented at showing people things. What awesome closeups and techniques shown. Such effort to make a video so high quality! Others tend to skip over and just talk. Geezus I wish you were doing stuff for Motion Pro. You are outshining some of their folks!
@rainkrystal5482 Жыл бұрын
Great video. You have the best instructional video. You explain everything step by step, very easy to understand and you even explain what type of tools you need. No one else explains it better. You’d be a great teacher! Keep it up. Also you wouldn’t know how to do things on an 09 ninja 250R would you?? Thanks
@yc__5 жыл бұрын
Thanks man, finally someone who can show how its done 👍
@jasonmarcus8896 Жыл бұрын
Hey, super thorough. Thanks a lot!
@Theantundertherock10 ай бұрын
Thanks man!
@jden68354 жыл бұрын
great video, thanks!
@liquidshock34364 жыл бұрын
Dude. First of all congrats for the perfect how to guide. I need your help. Ive changed the back turnlights to leds and front turnlights too. I did the relay thing but when i test it, just the front turnlights works. I tried to remove the fuse and place the relay on fuse's spot but still not working. Can you help me?
@Ale93Difo4 жыл бұрын
Great video, thanks! Just two questions... Is it normal that I don't have the white connector on my resistors? Resistors > OEM connectors > light indicators. Is this the right sequence?
@michaelash4490
4 жыл бұрын
I am not sure, I did not use any resistors on my lights. A resistors absorbs the electricity not used by the LED's (basically your bike is going to use just as much electricity as halogen bulbs) but using the aftermarket relay reduces your electricity usage.
@Ale93Difo
4 жыл бұрын
@@michaelash4490 Sorry, I mean at minute 4.00...the TST connectors that you used, I've got the same connectors but without the white plastic stuff Does this change something?
@michaelash4490
4 жыл бұрын
@@Ale93Difo The connectors are bike specific, have you taken a look at your oem connectors and tried to plug in the TST connectors?
@Ale93Difo
4 жыл бұрын
@@michaelash4490 I've the same bike, finally yesterday I found where to buy Kawasaki connectors, thanks 🙏
@Ale93Difo
4 жыл бұрын
@@michaelash4490 I kept halogen bulbs on the front and I've mounted an electronic relay (Koso flasher relay) with led indicators on the rear. Because mine relay was a 3-pin relay, I've grounded the green pin to a bolt of the electrcal plate (3.16). Everything worked...I can suggest to other people here to be sure that you're mounting an electronic relay, not a cheap one!
@drewjenn98194 ай бұрын
Great job! Can you please send a link to how to put everything back together?🫤
Пікірлер: 16
You are supremely talented at showing people things. What awesome closeups and techniques shown. Such effort to make a video so high quality! Others tend to skip over and just talk. Geezus I wish you were doing stuff for Motion Pro. You are outshining some of their folks!
Great video. You have the best instructional video. You explain everything step by step, very easy to understand and you even explain what type of tools you need. No one else explains it better. You’d be a great teacher! Keep it up. Also you wouldn’t know how to do things on an 09 ninja 250R would you?? Thanks
Thanks man, finally someone who can show how its done 👍
Hey, super thorough. Thanks a lot!
Thanks man!
great video, thanks!
Dude. First of all congrats for the perfect how to guide. I need your help. Ive changed the back turnlights to leds and front turnlights too. I did the relay thing but when i test it, just the front turnlights works. I tried to remove the fuse and place the relay on fuse's spot but still not working. Can you help me?
Great video, thanks! Just two questions... Is it normal that I don't have the white connector on my resistors? Resistors > OEM connectors > light indicators. Is this the right sequence?
@michaelash4490
4 жыл бұрын
I am not sure, I did not use any resistors on my lights. A resistors absorbs the electricity not used by the LED's (basically your bike is going to use just as much electricity as halogen bulbs) but using the aftermarket relay reduces your electricity usage.
@Ale93Difo
4 жыл бұрын
@@michaelash4490 Sorry, I mean at minute 4.00...the TST connectors that you used, I've got the same connectors but without the white plastic stuff Does this change something?
@michaelash4490
4 жыл бұрын
@@Ale93Difo The connectors are bike specific, have you taken a look at your oem connectors and tried to plug in the TST connectors?
@Ale93Difo
4 жыл бұрын
@@michaelash4490 I've the same bike, finally yesterday I found where to buy Kawasaki connectors, thanks 🙏
@Ale93Difo
4 жыл бұрын
@@michaelash4490 I kept halogen bulbs on the front and I've mounted an electronic relay (Koso flasher relay) with led indicators on the rear. Because mine relay was a 3-pin relay, I've grounded the green pin to a bolt of the electrcal plate (3.16). Everything worked...I can suggest to other people here to be sure that you're mounting an electronic relay, not a cheap one!
Great job! Can you please send a link to how to put everything back together?🫤