k24 4piston oil pump install

Автокөліктер мен көлік құралдары

crank part 1 - • K24 crank install (par...
crank part 2 - • K24 crank install (pa...
pistons part 1 - • K24 piston install
pistons part 2 - • K24 piston install part 2
oil pump - • k24 4piston oil pump i...
head assembly - • Installing valves on t...
head install - • Installing the k20 hea...
cam shafts - • Cam shaft install on k...
timing chain - • Installing the timing ...
timing cover/oil pan - • Skunk 2 timing cover /...
cooling system - • K24 engine cooling system
end build - • k24 end build
Oil pump bolts - 95701-0602508, 95701-0805008 , 95701-0807508
OIL pump chain - 13441-pcx-004
chain guide - 13460-pnc-004
OIL pump tensioner - 13450-RAA-A02
baffle plate - 11221-pnc-000
crank sprocket -13620RAAA02
If a MECH A NIC video helped you consider donating to my patreon account to help support the channel. / the_mech_a_nic
or my paypal
paypal.me/jonathanrenteria1986
THE MECH A NIC’s amazon store ,here’s the tools I use
www.amazon.com/shop/themechanic
THE MECH A NIC’s Instagram page
/ the_mech_a_nic
THE MECH A NIC’s facebook page
/ the-mech-a-nic-1356996...
Thank you for watching my video, I appreciate the support !

Пікірлер: 77

  • @bigbothoee8617
    @bigbothoee86172 жыл бұрын

    Nice man thanks for taking time to strip the pump down nice to see what you pay for

  • @SwampXNutz
    @SwampXNutz5 жыл бұрын

    Your videos are helping me out so much I feel like I should pay you! Lol

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Lol that's why there's a link to my paypal/patreon 👍. Glad I could help

  • @SwampXNutz

    @SwampXNutz

    5 жыл бұрын

    The mech a nic I would if the k wast taking all my money 😂

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    I hear you. Mine is a endless money pit! 😑😂

  • @CravinMorehead420
    @CravinMorehead4205 жыл бұрын

    Mission accomplished ! Hahaha, edits were great !!

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Lol! Thank you 👍😂

  • @TheCowgirlNiamh
    @TheCowgirlNiamh5 жыл бұрын

    Great job! Hilarious pinching your daughters nail file again 😂 I need one of those torque wrench lol too cute!!

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Lol thank You! Hey so I have a problem with the package I waa going to send. It'll cost me about $250 to send it to you which is crazy! Lol .can I send you a $50 Amazon or eBay card? Or to your PayPal?

  • @TheCowgirlNiamh

    @TheCowgirlNiamh

    5 жыл бұрын

    $250?!!! 😳😳😳 That's insane! Lol I'm only across the pond, not in outer space 😂 How about just the test light? It's been on my wish list 😉

  • @Pedro.fg2
    @Pedro.fg22 жыл бұрын

    Bro 😂😭😂😂 the beginning caught me off guard

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    😁👍

  • @BrandonSalas-us8mm
    @BrandonSalas-us8mmАй бұрын

    LOL THIS GUY IM SO GETTING ONE FROM A JUNKYARD ACURA FOR MY BUDGET BUILD

  • @themechanic6117

    @themechanic6117

    Ай бұрын

    No problem with that 👍

  • @XzBestBudzx
    @XzBestBudzx Жыл бұрын

    Very good video helped alot

  • @themechanic6117

    @themechanic6117

    Жыл бұрын

    You're welcome

  • @DrArrow
    @DrArrow2 жыл бұрын

    My girl looks at me like that’s not real lmfao

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    😁👍

  • @ADR69
    @ADR695 жыл бұрын

    I would replace it since you're there but I have no hands on experience with that situation so take it for what it's worth

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    I ordered A new part to replace it 👍

  • @shionnsr8684
    @shionnsr86844 жыл бұрын

    Proper!

  • @ooojayman2331
    @ooojayman23315 жыл бұрын

    What size is the Allen key I have 3 whole set and they all wobble

  • @EXOVCDS
    @EXOVCDS5 жыл бұрын

    From the looks of it... you're ahead of schedule on getting this to running phase. What was the initial timeline?

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    I was thinking the same, but it'll come to a hault soon since the only parts I don't have yet are the really expensive parts. Over 1k for cam shafts, over 1k for intake manifold..never really had a finish date in mind. I'm in no rush since I haven't bought a car yet . I just want to finish it so I can admire it every day 😂👍

  • @jowellp.r.7577
    @jowellp.r.75775 жыл бұрын

    Hey bro,i got a question. Im planning to do the same.but im confused wish timing chain do i need to use for my k20/k24a2.i have a stock rsx type s 2005 k20z1. Thanks for your help and knowledge. Keep it up with your built.waiting for that first crank.

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    I believe if you use a k24 block you have to use a k24 timing chain, the oil pump chain I installed in this video is from a k20

  • @jowellp.r.7577

    @jowellp.r.7577

    5 жыл бұрын

    @@themechanic6117 ,thanks bro..im getting some ideas from your videos..keep it up✌👍

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Thanks for watching 👍💪

  • @SteveRobReviews
    @SteveRobReviews5 жыл бұрын

    Ok I didnt see any of the 4 pistons . Your going to have to rip that off and do this vid over again. I need to get one of them meow torque wrenches . That six sec. clip was something else :) Your quite delusional and fit right in with everyone else 👍

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Sorry to disappoint Steve! 😂 the meow mix torque wrench makes me laugh every time I watch it 😂👍

  • @accorddynamic244
    @accorddynamic2442 жыл бұрын

    🤣🤣🤣🤣🤣 meow 💪🔥 ur editing is great

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    Thank you 😆👍

  • @accorddynamic244

    @accorddynamic244

    2 жыл бұрын

    @@themechanic6117 anytime bro 💪😄

  • @marlontucker5419
    @marlontucker54195 жыл бұрын

    Which you had show how you install the bolt for block the oil pressure

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Look through my engine build videos . I have a video on that. It's old n crappy but it's there

  • @nsogbu1115
    @nsogbu11152 жыл бұрын

    Good video. Can this conversion work on a K24Z2 block? I really want to replace my stock oil pump....makes alot of noise on cold start.

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    Are you sure it's the pump?

  • @SuperJParks
    @SuperJParks4 жыл бұрын

    So on a new time chain kit... There are yellow chain links on the smaller chain.. Does that specific smaller oil pump chain have to be lined up with anything? And if so how?

  • @themechanic6117

    @themechanic6117

    4 жыл бұрын

    Using a k20 oil pump theres nothing to line up. You can just install the chain

  • @SuperJParks

    @SuperJParks

    4 жыл бұрын

    @@themechanic6117 OK thank you!

  • @hinata32725
    @hinata327255 жыл бұрын

    would you need to prime the oil pump? packing it with vaseline to aid it with priming?

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    I thought about packing it but if 4P shipped it like that and no where in the instructions it says to pack it so I didn't. It'll be cranked over before starting to ensure oil pressure

  • @hinata32725

    @hinata32725

    5 жыл бұрын

    @@themechanic6117 can i ask you a question. my friend installed a 4piston h22 oil pump on a h23 block and he is getting no oil pressure. we tried packing it with vaseline and still nothing shoots up to the head when he turns the car over. Any ideas?

  • @bigbothoee8617
    @bigbothoee86172 жыл бұрын

    8.10 the metal behind plastic is thinner from vid

  • @thedude3189
    @thedude31892 жыл бұрын

    Any of the k24 bolts the same and will work? I forgot to ship out my bolts with a pump I sent out 😬 I forgot if the k24 ones worked, im trying to avoid him from buying new bolts...any suggestions? Thanks

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    I think the k24 and k20 oil pumps use different bolts . When I bought the 4piston oil pump it came with new bolts

  • @thedude3189

    @thedude3189

    2 жыл бұрын

    @@themechanic6117 i finally found out all the bolt sizes, guess the two 12mm on the k20pump are the same as the k24 where they bolt up too, i couldn't remember if I used them on my block and I did. As for the 10mm still haven't found out yet but im sure there is one located on the k24 or hopefully he has a spare match. But thanks anyways, ya they come with new bolts hopefully they didn't account for that in the price because you can reuse them, they are nothing like head bolts where you would have to replace them indefinitely as far as I know.

  • @Hello_its_me_mario
    @Hello_its_me_mario2 жыл бұрын

    What size was the bolt you use to block the oil hole

  • @Hello_its_me_mario

    @Hello_its_me_mario

    2 жыл бұрын

    Oh ok

  • @Moueez

    @Moueez

    Жыл бұрын

    12

  • @athiam152
    @athiam1522 жыл бұрын

    Any alignment on that chain?

  • @themechanic6117

    @themechanic6117

    2 жыл бұрын

    No. There's no balance shaft on it so nothing to align

  • @Questchaun
    @Questchaun5 жыл бұрын

    Any thoughts on how to test a k20a oil pump?

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Test it for what? I really dont know of a way to test it

  • @PolishedMobileDetailing503

    @PolishedMobileDetailing503

    4 жыл бұрын

    Measure the clearances

  • @themechanic6117

    @themechanic6117

    4 жыл бұрын

    Thats about as close to testing as youll get

  • @PolishedMobileDetailing503

    @PolishedMobileDetailing503

    4 жыл бұрын

    The mech a nic lol not Much advice I know but usually my “test” is buying a new one 😂

  • @IaintTrynaGoOutLikeBIGnPAC

    @IaintTrynaGoOutLikeBIGnPAC

    3 жыл бұрын

    @@PolishedMobileDetailing503 what clearances are you alking about? Tf

  • @HectorRS
    @HectorRS4 жыл бұрын

    Hey brother nice upgrade 👌 . Just curious how many hp could u get with this modds..

  • @CheckTheFeeds
    @CheckTheFeeds Жыл бұрын

    The bolt you have to use to plug the hole what size is it?

  • @themechanic6117

    @themechanic6117

    Жыл бұрын

    You'll have to tap threads so whatever threads you tap, that's what type of bolt you use . Check out this old video I made about that bolt for oil pressure kzread.info/dash/bejne/doys1ax6l72-g6w.html

  • @ptolalibertad
    @ptolalibertad4 жыл бұрын

    Was your channel down? Could not find any of your vids for awhile

  • @themechanic6117

    @themechanic6117

    4 жыл бұрын

    No it been up n running. Its weird that you couldn't find my vids

  • @ptolalibertad

    @ptolalibertad

    4 жыл бұрын

    The mech a nic found them again...👍🏿im happy.. 😬have a great week👍🏿

  • @ptolalibertad

    @ptolalibertad

    4 жыл бұрын

    The mech a nic oh I had some on my watch later list and they disappeared.. Started looking.. channel gone..

  • @themechanic6117

    @themechanic6117

    4 жыл бұрын

    @@ptolalibertad thats crazy. Idk why that happened. Hit the sub button to not lose it again lol

  • @ptolalibertad

    @ptolalibertad

    4 жыл бұрын

    The mech a nic 👍🏿

  • @kennygibson8538
    @kennygibson8538 Жыл бұрын

    Good video , The music is weak

  • @themechanic6117

    @themechanic6117

    Жыл бұрын

    Free music is weak music.

  • @osama_no_cappin2478
    @osama_no_cappin24785 жыл бұрын

    😂meow

  • @eliasshadow5643
    @eliasshadow56435 жыл бұрын

    Wtf is up with that extra shit.. Lmao was that supposed to be a cat? 🐈

  • @themechanic6117

    @themechanic6117

    5 жыл бұрын

    Yes, some cat sounds . Don't take it too serious

  • @deespasojevic3013
    @deespasojevic30135 жыл бұрын

    First!

  • @lilloaa
    @lilloaa4 жыл бұрын

    Stop with the cat noises, please 🤮

  • @themechanic6117

    @themechanic6117

    4 жыл бұрын

    Some people find it funny , some don't... Sorry for the inconvenience

  • @kudzy11

    @kudzy11

    4 жыл бұрын

    Miiiiooooow !🐱

Келесі