Congrats Rob!! Travis, the car is looking good

Congratulations Rob i wish you the best for your family! Travis nice Video!

Awesome congratulations Rob! So good!

Love the videos man, like how you did step by step explained it all through

Congrats Rob... great vid Travis 👍🏼

Thank you so much, these instructions were really clear, I can confidently do this now

Thank you for the detailed install, really helpful.

Welcome to fatherhood Robbie. I have a kid also. It's a beautiful experience.

Congrats Rob!!!

Nice review and install Travis! And congrats to Robbie

Congratulations rob!!!

That Circuit Hero shift knob looks great!

Congratulations Rob on the new addition to the Refine Movement family. Still rocking my sticker on the EG, quality sticker love it. $6 even to Australia :p

@RefineMovement

6 жыл бұрын

Thanks for your support Alex!

@alexbowyer6013

6 жыл бұрын

No problems guys, keep up the great content and I'll keep supporting :)

Nice video!! And congratulations Travis!!

@creambuilt

6 жыл бұрын

I ment Rob. And his new born. Lol

Thanks for this! Been slacking on installing mine lol looks like a shit ton of work haha. Keep on keepin on!

Congratulations

Binge watched the project EK... subscribed...

@RefineMovement

6 жыл бұрын

Thank you!

So happy the place I ordered the aluminum bushing from ran out of the circuit hero one and asked if I’d mind a blox one instead which is split

Yo! Great video. Installed one of these shifters lastnight on my hatchback. Made the circuit hero shifter plate for mine too but used carbon steel and clear coated it. Couldn't see paying so much for one. Easy

@RefineMovement

6 жыл бұрын

That’s awesome you made your own!

@chrsst916

6 жыл бұрын

Cost me about $6

This video help me Install my replica shifter which is identical to the ktuned thank you.

You should put the links on the description! Great videos 😃👌

Congrats Rob! Glad to hear your gonna build the transmission. I recommend the 4.7 final gear and if you want synchro's get Honda factory replacement. I have heard synchrotech fail under heat and stress. I fell you man I am itching to race myself but I am building everyone else's cars. It's fun but I want to work on my own projects.

@RefineMovement

6 жыл бұрын

Thanks for tips Nick! What tranny is the 4.7 out of ? Or is it an aftermarket final drive? I’m a newb to this stuff. I hope you can get on track soon man!

@upfactoryracing4148

6 жыл бұрын

Refine Movement no it is an M factory gear set. 500 bucks but worth it. Obx diff is about 350 not bad for what you get. The good thing is you will have a bullet proof trans at that point. There really isn't any swappable final drives for the d series unlike the B series. The B VTEC transmissions are different too. It is the countershaft that the final gear is attached to and they are different for all the transmissions. Your Si trans has good gear sets especially for the track, close 1 thru 4. 5th is short too so your rpms will be high cruising highways.

Nice video, now i know allready with bushing to buy before install ;)

5:05 Install start

Great vid homie!

@RefineMovement

6 жыл бұрын

Thank you!

It could be the coolant temp switch hook fans up strait to batt.just to make sure they work

That nice bro good work 😎

@RefineMovement

6 жыл бұрын

Thanks!

This video was really helpful thank you !!! And I was having trouble because I didn’t have the washers, does anybody know where to get them?

I like the way you are upgrading your car. Not ricer at all.. I own a Honda EJ8 coupe same color as your civic. And even if my car is automatic, pull hard. I'm working on the suspension, having some problems removing the bushing bolts because this car was from the bay area, the bolts seized inside the bushings. Other upgrades are tuner upgrades, Not ricer sht 😂, Great videos...

Great video Travis nice length congratulations Robbie on newborn you'll make a great father also are you guys planning anything special for 20000 subscribers your about there

@RefineMovement

6 жыл бұрын

Thanks ! I have been thinking about trying do something for 20k not sure what though. Maybe a sticker giveaway of some kind

Well explained

Those rims are fucking sick. Car looks good

Radiator fan switch. Which is located on the thermostat housing. May as well upgrade it to the Mishimoto. Turns that fan's on at a lower temp. Great for track setup.

@RefineMovement

6 жыл бұрын

I’ll look into that ! Thanks !

Going to the FIRM sometime in sept? I've been wanting to go back, but it comes down to avoiding the florida heat lol. Are you running solid mounts to use those metal bushings? And much more does the shifter vibrate?

@RefineMovement

6 жыл бұрын

We’re hoping for September. Yeah the bushings mount straight up. I’ve heard other people complain about the vibrations but it didn’t seem to change much at all for me. I like it alot

@5PYZ3R

6 жыл бұрын

He means the engine mounts - with the solid shifter mount, any engine movement might compromise shifting.

@RefineMovement- Whats the name of the Rubber grommet that you have to replace? I am looking for it

Hi Rob, great video! Can you tell me wich shift knob you use.? Thx

@RefineMovement

6 жыл бұрын

Circuit hero

What is the advantage of solid shifter bushing vs. something like Energy Suspension? I just picked up a '98 Sedan and it needs bushings, so I'm thinking of ES & a short throw shifter to make my daily commute a little more fun.

@RefineMovement

5 жыл бұрын

It’s just about feel. The solid was a step up from the ES bushing, but it can be annoying to some as there can be unwanted vibrations. The ES was good for me on the street.

I think its so stupid when people say there not a wiring guy 🙄it's so simple and it's pretty much the heart of the motor

If it fans work ok it almost has to be the switch that turns them on,if u have to u can jump the coolant switch plug and fans will run continuously

@arthellstrobles1241

6 жыл бұрын

george bonney90 👍🏻 or have a switch to just bypass the whole thing and turn them on when your at a stop. (As a double edge sword) when you have your car off, you can throw your switch on to cool your engine down. But if you forget you have them on, you will start killing your battery little by. little

@georgebonney90

6 жыл бұрын

Yeah in my opinion you'd only wanna jump the coolant temp sensor/switch if u have too, also by turning on the AC the fans will run, if u have AC

@arthellstrobles1241

6 жыл бұрын

george bonney90 indeed I would go with your solution first and if yours does not work, go for a simple switch.

I was looking into to the lean back k tuned. Do u having any issues when shifting to third and the shifter hitting the dash?

@RefineMovement

5 жыл бұрын

no issues with this version. KTuned sent me a lean back version recently that I will be installing sometime this year

Can somebody link me that metal bracket under the red bushing on the shifter above exhaust

it's cool

Idk if anyone has mentioned it yet, but ktuned make a different elbow peice specifically for the ek to keep from jamming your hand into the dash in 1,3 and 5th gear, if you so happen to run into this issue, it's about $40.

@RefineMovement

5 жыл бұрын

Yes I’ve heard of that but it’s seems to be fine on my car.

Do you notice any more vibration or noise with this modification? I have a gutted interior as well

@RefineMovement

5 жыл бұрын

None

Will this make it vibrate a lot?

👍👍

What kind of pedals are those ? Are they type r pedals ?

Where did you buy that full size radiator?

@hcracer1985

6 жыл бұрын

Barbas Life that’s the integra radiator

Hey did anyone else have an issue with the shifter hitting their exhaust? I have a skunk2 exhaust, could it be possible I installed the bitch pin side upside down?

You should really consider wrapping your header. Only cost like $40 and dramatically lowers under hood temps. Using an infrared thermometer, my 95 hatch's header went from about 670°F unwrapped down to about 275°! That's a huge drop.

@RefineMovement

6 жыл бұрын

Wow! That’s a huge difference I didn’t realize it would be that dramatic. Where did you get the wrap you used?

@95P74

6 жыл бұрын

+Refine Movement Yeah, it did more than I thought it would, it'll also keep more radiant heat away from your radiator, oil pan, and intake. I got mine off eBay, just look up titanium header wrap, I think I got a 50ft roll and wrapped it all the way to the cat connection. Prevents burning yourself too if you need to do anything under the hood at the track. You can install it in an afternoon and do it wet or dry, overlapping half the wrap. I did it dry, just wear gloves and a face mask. It's been on over 2 years on a cheap eBay header, no cracks or issues. It really is amazing stuff, can't recommend it enough.

@RefineMovement

6 жыл бұрын

Awesome thanks for the tip I will probably do it!

Question for some honda guys. Im looking at buying a 1 owner super clean stock 97 civic DX. Its a 5 speed new timing belt and h2o pump and new clutch. But it has 218k miles is it worth it to have as a daily? Its stock non VTEC SOHC any input would be great !

@RefineMovement

6 жыл бұрын

That sounds like a good car to buy overall big plus that it has those new parts. My 1998 is the same car and has about the same mileage. For a daily driver it should be fine but with that mileage things will need to be replaced. the suspension and steering components could be all bad if they haven’t been changed in a while or ever ie bushings, tie rods, struts/shocks. Check the fluids to make sure they are newer and haven’t been there 2 decades. At 200k my power steering was leaking.

@CWPSO

6 жыл бұрын

Refine Movement Thank You so much for your reply ! Ill check it out with a little more ease of mind then. Once im back in the honda game, ill have to rock one of yals stickers.

@RefineMovement

6 жыл бұрын

Sounds good man good luck! - Travis

@aw614

6 жыл бұрын

my experience at those miles is to watch out for all the old coolant hoses and be ready to replace them asap if they are old and hard.

@CWPSO

6 жыл бұрын

aw614 ill def check that out while im at it thanks!

Do You have the part number of the rubber grommet? Thanks for the vídeo!

@chrislienaerts6573

2 жыл бұрын

Have you found the part number perhaps?

dang the baby is 3 now

Dash delete and a tablet for your gauges next (weight deduction) ? CONGRATS Rob!!!! 👌🏎🎣

@RefineMovement

6 жыл бұрын

That would be epic!

@mat122100

6 жыл бұрын

Refine Movement i wanna do it as well 👌 🏎

What hood vent is that

People recommend to use PU motor mounts with solid bushings.

@RefineMovement

6 жыл бұрын

I had PU in there and they are better then stock but I wanted a firmer feel #becauseracecar

Part number for the rubber grommet

Hmmm. I clearly told u to do both fans and u said it wouldn’t fit due to the new header. Now ur saying “decided to” lol. Looks good 👏

@RefineMovement

6 жыл бұрын

Yeah it’s real close but it does fit. Thanks for always being there to troll me. Much appreciated

@hcracer1985

6 жыл бұрын

Refine Movement hahaha. U got it lol. Just don’t ever take it personal.

Adopt me. I want to have a honDAD.

Its the relay, you are pulling to much using both fans maybe hard wire to fusebox and a switch to turn on as needed

Them dimes solid bushing are A waste of money if already had poly bushings.

@RefineMovement

5 жыл бұрын

I had the poly bushings for a few years and never felt much of a difference from stock. The solid bushings really gave me the feel I was looking for.

@SIRICKO

5 жыл бұрын

Refine Movement lol it’s in your head man.

What you should do is b swap it lol

@RefineMovement

6 жыл бұрын

Send me a B and I’ll put it in, no problem

@MyWolffy

6 жыл бұрын

Refine Movement understand how that is lol

Really?! He had a boy?! But I didn’t see his pregnant stomach inflate!