These bi color LEDs are my favorite 🔥 miss these type of videos bro. Keep it going!!

@HillbillyHydrographicsVinyl

3 жыл бұрын

Got your bicolor on 3 channels now too 😁. I swear you must be the only one, I don't think most people know what they are or the benefits. hillbillyhydrographicsandvinyl.com/products/led-5050-6-channel-wyr-rgb-bipolarity

@flyryde

3 жыл бұрын

Dude it blows my mind that these videos get so much love. We literally shot and edited 2 hours start to finish 😅

This is exiting !!!!! Thank you for showing the soldering part to the led and how to set power! I’m learning as much as I can for my Ford Fusion!

I missed these kinds of vids. This was an awesome watch.

You got some patient skills to be soldering all those little wires in there!!!!!awesome job!!!!

@flyryde

3 жыл бұрын

Thanks for watching 🙏 Would you believe these are the easier strips to solder 😅

Amazing!! Been binge watching all your videos to gain as much info about lighting as I can before I work on my own setup. I do want to see you mess with a morimoto sealed 3 projector(headlight) but because they're new from morimoto and I'm thinking of using one for my build.

Perfect timing on this video since i literally just received my led Stripz from Yunique Led! I got a board of white/ amber and a board of red / amber. Just a couple weeks ago, i also got these same style led panels but from corsomotion that I had custom made with red and white leds.

@mattg8787

3 жыл бұрын

how do you get just the led strips i looked on the Yunique Led site and cant find just the white/ amber led boards

Definitely an informational video

In the video you said you would link to the tools and most importantly the LED strip itself. I dont see any links though. I am subscriber and email subscribed on your site btw

Where can I find these parts from Unique LED? cant seem to find them on insta or online.

Very straightforward.

@flyryde

3 жыл бұрын

Hey dude, how are you!

Congratulations for the video, very well explained, one question: where do they sell the module that turns on the leeds? Regards.

This is what I’ve been looking for !!!

@flyryde

3 жыл бұрын

What are your plans for them?

@leonfyahrecords2262

3 жыл бұрын

@@flyryde il send ya some photos over on email if you’d like? So far it’s I’m nearly fully LED convertered on the old civic, I’ve tinted the lenses with a different style, at the mo I’m working on a long light bar that fits under the back seats I wanna start programming!

Very informative. Thanks

@flyryde

3 жыл бұрын

Thanks for watching!

Faster way to tin the cables: solder heat pot, keeps a bath of solder where you can just dip the cable in to tin it

@flyryde

3 жыл бұрын

My cable for the heat pot is trashed, and that thing kinda freaks me out to be honest.

@Tarex_

3 жыл бұрын

@@flyryde you work with cables all day yet the one useful one is trashed haha, jk, well, yet it is the easiest version, or let's call it most comfortable, you could also use flux, sticks like honey, is cold, makes the solder flow on the cables easier, but is double the work ;)

@flyryde

3 жыл бұрын

@@Tarex_ I really don’t work much in the workshop anymore my man. Long enough to teach something in a video, but I truly would rather be making videos than lights.

@Tarex_

3 жыл бұрын

@@flyryde on the one hand i can fully understand you and know where it's coming from (I'm in the process of getting a startup going and have been building up to it for a while) on the other hand it's of course a sad thing, great videos, well the technical ones since I'm in germany and the Ghozt modules aren't a thing here.. but i'm subscribed and will watch whatever you fabricate

@flyryde

3 жыл бұрын

@@Tarex_ I’m just getting warmed up dude. Wait till you see what I get to build and make videos about, once I’m not longer a slave to the trade. That’s when I’ll REALLY be able to help people with my content here. Till then I’m just doing my best with what I have available. I’m patient 👍

Make a board with a few drilled holes so you don't lose the ends of the cables, if you aren't removing the spools all the time

Really awesome video. Thanks a lot for this. What surprises me, however, that YuniqueLED still sells exLED LED emitter products, although exLED has not received any responses to inquiries for several years. Unfortunately, I haven't had a good experience with the Koreans. Many greetings from Dresden Germany ....

Thank you for your insightful videos. I am in South Africa. I have a 2012 Suzuki Kizashi which came without drls. I bought the twenty dollar 23 inch flexible strips and stuck them with white 3m double-sided tape inside bottom of lenses and curved them to the sides of lenses. (Forward facing) They have functioned without fail since 2019. I feel it's now time for upgrade but keep the appearance simple as it is. (I can send a video clip). I basically want more led's per strip. What is the best you can do if your strips cannot curve gently and at what price? Jay.

Any other videos on how to make them? I want to make a small led strip for my sidemarkers?

@flyryde

3 жыл бұрын

Yup, lots dude.

Do you not use soldering flux for small components? I do DIY electronics occasionally as a hobby, and soldering flux helps quite a bit in keeping molten solder from shunting small connections by making the solder stay on the metal pads.

Hey quick 2 part question. Where can I buy that board? and did you get it with lights or without?

hello, what is this type of LED that glow white and yellow? Thanks and GJ

Please let me know the link to buy online

Can u shape them into a v shape like the Lexus headlights

I have an auxbeam led 6 mode 20" light bar, three wire unit. It works a couple of times and never works again. I'm on my third one from auxbeam. They don't know why it stops working, so just send me another one. We'll. I don't want to hook up the third one and have it not work. For you do you might know what might be happening to the light bar

Hey how do I Ordered a These type of LEDs

How much is a drop in for e70 x5?

Hi,where can i buy these led bar?

so can you do this with an addressable led strip instead?

@flyryde

3 жыл бұрын

So yes. 👍

Where do I buy these leds ???

Are these leds available ..and but where

Hi, how are you? My name is Erasmo. I want to congratulate you because you do some excellent jobs. I live in the state of Maryland. I would like to know if you can give me a job for a honda accord sport 2017.

@flyryde

3 жыл бұрын

Thanks dude! I’ll announce some new ways to get me to build lights for people in the hopefully near future. Till that happens though I can’t accept new custom build jobs.

What’s the correct name of the leds can u share a link to them

@HillbillyHydrographicsVinyl

3 жыл бұрын

These are a two channel or bicolor LED. Just like a RGB LED is a 3 channel. Not to be confused with bipolar LEDs which are typically 2 color also but they only have 1 set of connections. Bi color is available from most parts houses like Mouser or even super bright LEDs. They also come in a 5mm through hole if your just starting and want something a little easier to work with.

@flyryde

3 жыл бұрын

bit.ly/Ledstripz

How we purchase

white amber led code ? or name ? smd chip name ?

Dude are they look a bit easier to work with

@flyryde

3 жыл бұрын

This is one of the easiest strips out there for v5 Ghozt sequencers or even Corsomotion Sequencers

haha sup

I need one but flexible...

@jonathand8248

2 жыл бұрын

CAn I order 2 of this flexible for my side mirrors

Is there any way or place to make custom lenses for the headlight?

What is the Link to the ribbon cable tool?