ive learnt more about custom headlights from your channel than i ever imagined. Can you please do a step by step video on how you actually go about for example adding a switch back sequential C light , from the wiring , how you test them offthe car , to the programming of the Ghozt or corsomotion controller , like a from start to finish video

Great vid man. I love watching 2 masters at work. Stay Happy and Healthy.

@flyryde

3 жыл бұрын

You too! Happy and Healthy > Everything Else

Yeah now how I see how easy it is to use a stencil. I should’ve ordered one when I made the Caddy Deville tail lights ugh. I’ve talk to Jin before very helpful and awesome person.

We use this type of stencil while repairing cell phone mother boards. When you replace different IC, the infamous audio IC on the iPhone 7.

Watching your videos gives me sooooo many ideas for custom tails and headlight things. :P

@flyryde

3 жыл бұрын

Make sure you share what you come up with!

You should use a more controlled heat source. The LEDs have a certain temperature they can not exceed. Also needs to be hot enough to melt the solder and not the LEDs. Typically a Wave process is what is used.

This is brilliant!!! Thank you, Thank you, Thank you,

That was awesome, nice work im learning alot thanks

Pretty dope work as always..

@flyryde

3 жыл бұрын

🙏

This helped me out because I have a bunch of those the 7x4 with 2 led and then 7x2 but with 4 led per. I'm having a hard time figuring out how to solder them. The last 3 days ice spent about 5 hours just looking at them and 5 minutes soldering and it was wrong the way I started to solder them. Lol.

@flyryde

3 жыл бұрын

I suuuuuuck at those ones. Gonna get the stencil for them soon cause I can’t freehand them at all 🤦‍♂️

We tend to use a paste machine and a pick and place machine called the 'mirea' love your work and goes through a 10 stage re-flow oven if we have to paste by hand we tend to do it in one pass also if the paste is slightly harder than normal quick heat gun woft or add some flux liquid

@flyryde

3 жыл бұрын

That’s pro stuff man 👌👌👌 I’m much like many of the viewers here though, I don’t want to have to be good at this process, or have special tools and equipment... just want to make dope lights as quick and easy as possible 👍 So glad we have so many options now! Next video you’ll see a VERY different method, going hardcore manual mode 😅

@InfarelLRB

2 жыл бұрын

@@flyryde How much would you charge to do my tail lights??? I have a Lexus LS 430….. I would try on my own but I’m scared that if I open the taillights up, I’m gonna have difficulty closing and sealing it back. I have no idea how to even do it.

“in this case you can do it again “ best part of the vid lmaooo

You are evolving m8. Soon you will be designing your own circuit boards. By the Next time I mention the words Gerber files you'll know what's up 😏

Very motivational

Brother, which one of your led controllers have you made?

so that’s how it’s done, thanks for the insight

@garforce2

3 жыл бұрын

WWWWAAAIIIIITTT!!!! I’M BLUE NOW!!

Ive been looking at those Corsomotion 15" strips for a DRL/Running light/turn signal, controlled by Ghozt sequencers. There is no info about the strips on their website. Any idea if they are bright enough for a proper drl/turn signal (being the only source, not in conjunction with a oem light)? Would i need a booster for the Ghozt module? Wish they would update their info!

i like your work chris

@flyryde

3 жыл бұрын

💚 you back!

Does "bi-color" also do red/amber? i need these to do my tail lights

How do I install them because I don't see any wire come out of the led stick

How can I purchase these from you? I have a p as ur of spec D headlights and the sequential turn signal LED strip, got wet and doesn’t work anymore. Just the bottom portion but wanted to replace it and they don’t sell them but I think yours might work

Corsomotion 💚💚💚💚

@flyryde

3 жыл бұрын

These are exactly what’s headed to you bro, plus a couple of my old ghozt modules.

@fablighting7884

3 жыл бұрын

@@flyryde sweet💚💚💚

I want to buy 4 led strips like that one for my lexus is250 taillights what else do I need other than the led strips

Awesome video. I need that stencil. Ask them to make some for us. Why not. More products more money for them.

@flyryde

3 жыл бұрын

The products come preassembled, so you don’t need the stencil. Just wanted to share how this is all made so you know how much work goes into these parts that are available to you.

Hi, Chris. Cool and compact is a great idea. Please share a link to bi-color LEDs that you use in this project.

@flyryde

3 жыл бұрын

Links in the description. They are on Corsomotion website 👌

@olegkil4923

3 жыл бұрын

@@flyryde Hi Chris. I meant bi-color LEDs smd components. I am from Kazakhstan and shipping from Corsomotion will be too expensive for me. Therefore, I am asking for a link to the quality LED smd components that you use in this project. And I hope it will be Amazon or Aliexpress.

Bro you should link up with a few guys on here with robotic arms. They have little ones that are not so dangerous. Small enough to handle a board

Where to buy this led from please

Hey Chris bro, you should do some sort of like live stream series to teach us the ins and outs of the ghozt programming, I didn’t notice the swap channel feature until now lol

@flyryde

3 жыл бұрын

I can’t tell if you’re kidding lmao? I logged in a good 100 hours of exactly that this summer. Sooooo much programming. I still need to add the remaining 20-30 unlisted videos from KZread to my blog on the website 👍

@garforce2

3 жыл бұрын

@@flyryde kidding because I was there for every one of them but a little serious because I forgot about the swap channel feature

@garforce2

3 жыл бұрын

@@flyryde still can’t believe i’ve been a member for 6 months though, man time flies

@flyryde

3 жыл бұрын

@@garforce2 no kidding dude! And yeah it’s crazy how much I forget, and how much work it takes to organize and make this kind of knowledge laid out so you don’t have to sift through countless hours of live streams lol

@justinrolon4643

3 жыл бұрын

Yea that swap technique to fix the burnt out led was dope ..

Can’t find these on your website😕

Which type led using(led model number )

First comment! I love your videos bro! Ive already built 10 headlights and even build a custom set for a cobalt!

@flyryde

3 жыл бұрын

Nice! What other types of Headlights aside from the Cobalt?

@julianbreakseverything6397

3 жыл бұрын

@@flyryde i recently did a mustang gt 04 and a 2019 camaro ss! DRL also 2012 camaro ss halos and demon eyes and my 2000 civic ex

why do u guys never put a link to get them???? dont worrie im sure ppl wont take your work smh..

Jesus Christ! I'm a DYI guy but I am absolutely lost when it comes to doing some of these things in ur vids. Any way I could get a set of 16 inch LED's like that, that come programmed already just Plug N Play??? Dying to get sum 🙏🙏🙏🙏

Will these strips flex at all? Couldn't find that info on their site

@flyryde

3 жыл бұрын

Yeah, they’ll flex, but they’re also extremely easy to add something like a 20awg tinned wire to so you can make super specific bends and shapes.

Where can we buy the stencil and the LEDs to put one by one on the strip..

@flyryde

3 жыл бұрын

I don’t think you can buy stencils for most LED stripes, including these, however they are pretty common on widely used DIY kits in the PCB community (which I know nothing about lol). The strips you can just buy from Corsomotion already have all the hard work done to them so you get to focus on the fun stuff 👍

@CCSlayer

3 жыл бұрын

@@flyryde dam that sucks. I’ve been tryna watch your videos and do a lot of research. I have a good knowledge of soldering and circuits cards. And just struggling on finding equipment that I can build to make it not so expensive and multi applicable for myself and customers to provide quality work. Any help?

@flyryde

3 жыл бұрын

@@CCSlayer you don’t need to assemble these dude. Just buy em preassembled for 35 bucks each. All the work just to put them together using a stencil would be too expensive for me even if the parts were free! You can’t buy the stencil because you don’t need it 👍

What's control moudle you using in this?

@flyryde

3 жыл бұрын

This is the Ghozt 28 channel Sequencer

Yo. What does 4P x 19 mean? 4 pieces meaning 4 strips with 19? Shows that on the website.

@flyryde

3 жыл бұрын

4 LEDs per section, 19 sections

@MC-zx1qm

3 жыл бұрын

Thanks dude. Are these brighter than the Yunique stripz?

@flyryde

3 жыл бұрын

I just got some of them. I’m thinking it’s 100% the same. The resistors are really the variable. The boards are what make them yunique... see what I did there 😜

Good luck.....

Made with pride in 'merica 😁🇺🇸

I have a Scion TC 2015 you can make some strip led custom for my car, I want something like the headlights of the Toyota Marks X 2016. I want the same desing in my scion tc

@flyryde

3 жыл бұрын

So so much training here for you bro. Use what I’ve put up for free to figure out a dope build you can make yourself and be proud of 👌

???? Ugh.. OOOkay!

Jeez, so if you want to do this yourself, you have to wire all those wires? Yeah guess im not doing my side mirrors! lol

👍👍🇰🇬🇰🇬🇰🇬

@flyryde

3 жыл бұрын

👍

The more I watch your stuff, the more I realize it is way too complicated for me. Can't you show an easier way using just colour strip lights with the most basic wiring. Then identify the power module and resisters in order to get the colours as well as sequential operation for indicaters. This for a 400mm long tail light configuration for my old 986 Boxster. Maybe a stupid person like myself can then get the hang of it. PS Great work you clever youngsters are doing. Love you from Africa.