Junkers JU-87 Stuka - Phoenix Model 1:5 ¾ - 2400mm - NGH GF60i2 - MBC Weiden - Markus

Спорт

Flight of an Junkers JU-87 Stuka by Phoenix Model with a 2-cylinder in-line engine
Flug einer Junkers JU-87 Stuka von Phoenix Model mit einem 2-Zylinder Reihenmotor
Technische Daten / Technical specifications:
Hersteller / Kit: Phoenix Model
Typ: Junkers JU-87 Stuka "Bärli"
Maßstab / Scale: 1:5 ¾
Spannweite / Wing Span: 2400 mm
Gesamtlänge / Length: 1934 mm
Fluggewicht / Flying Weight: 13,3 kg
Motor / Engine: NGH GF60i2
Auspuff / Exhaust: Eigenbau (Selfmade)
Tank: 500ml
Propeller: 19x11 Engel Super Silence (6.100U/min.)
Spinner: 118x115 Krummscheid
Sirene: 12V Siren Horn (3S/1300mAh LiPo)
LED: 40mm Ultra LED Profi Shop
Cockpit: Aerocockpit Kit
Pilot: 1:5-1:6 German Pilot Warbird Pilots / 1:6 "Johannes Patzer" Dragon Model
Decals: Callie Graphics
Servos: Hitec D645MW
Schalter: Jeti DPS40
Empfänger: Jeti REX-12 Assist
Akku Empfänger: 2x 2S Lilon 2900mAh (Emcotec)
0:00 Intro
1:05 Start & Flight
4:40 Landing
5:51 Picture

Пікірлер: 73

  • @RCPLANEVIDEOS
    @RCPLANEVIDEOS4 жыл бұрын

    NGH GF60i2 Engine Test Video -> kzread.info/dash/bejne/YpiBs5KpnJfKkZM.html

  • @rookie1525
    @rookie15253 ай бұрын

    also was soll ich sagen? einfach wunderbar. die besten grüße an den erbauer und piloten, denn ich weiss, was das bedeutet. beim nächsten mal noch einen sturzangriff...;))

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    3 ай бұрын

    Vielen Dank, zum "bauen" war das nicht schlimm, war ein ARF Bausatz gewesen, aber machte richtig Spaß 👍👍😉

  • @michaelperkins7769
    @michaelperkins77694 жыл бұрын

    That Stuka Markus was flighting was awesome thanks for sharing it with us we will have to check out the manufactuer of them thanks again Michael/California

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    Thanks alot !!! best regard 😊👍

  • @davidlee6861

    @davidlee6861

    3 жыл бұрын

    I am the engine manufacturer, if you have any questions, please contact me, good luck

  • @ToddBreda
    @ToddBreda Жыл бұрын

    I maiden mine this Spring (electric setup)...Great flying, beautiful landing!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    Thank you very much 👍

  • @jessesoding4421
    @jessesoding44214 жыл бұрын

    Awesome plane great flying!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many many thanks 😊😊👍

  • @tamasmazanyi4536
    @tamasmazanyi45364 жыл бұрын

    Perfect flying model. Nice workmanship. Skillful, professional pilot. Good choice,congratulation!😊👍

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many many thanks 😊😊👍

  • @arthurvanaalst
    @arthurvanaalst3 жыл бұрын

    This makes me really happy, thanks for sharing this video.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    3 жыл бұрын

    many thanks!

  • @jasonbrand5352
    @jasonbrand5352 Жыл бұрын

    great plane :)

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    thanks 👍

  • @sassyrc1901
    @sassyrc19014 жыл бұрын

    Nice Plane, nice Pilot and ♪ Nice Camera Works ! ♪

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    3 жыл бұрын

    many thanks 👍

  • @martinliew578
    @martinliew5782 жыл бұрын

    incredible sound !

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    thanks 😊

  • @user-xu7je8qy1g
    @user-xu7je8qy1g4 жыл бұрын

    Nice airplane and nice piloting.JU87 feels like flying out of a fighter.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many thanks 😊

  • @beyondxtream4056
    @beyondxtream40564 жыл бұрын

    Nice additional weathering

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many thanks 😊👍

  • @chrisgraham9203
    @chrisgraham92034 жыл бұрын

    Nice airplane and nice piloting.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many thanks 😉

  • @MrStoney61
    @MrStoney616 ай бұрын

    Beautifully done and superbly flown!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    6 ай бұрын

    thank you very much ☺️

  • @daisydeng2611
    @daisydeng26114 жыл бұрын

    Amazing!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    many thanks 😊👍

  • @jimoconnor1875
    @jimoconnor1875 Жыл бұрын

    Awesome

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    thanks

  • @HARRISCOMMANDER
    @HARRISCOMMANDER2 жыл бұрын

    Bombastic Best!!!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    many thanks 👍😊

  • @axelschweiss5330
    @axelschweiss5330 Жыл бұрын

    Good lord! Hans Ulrich Rudel would be proud! AWESOME!

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    thanks ;-)

  • @ancientfinn3738
    @ancientfinn37382 жыл бұрын

    I love it

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    thanks 😊👍

  • @johne9562
    @johne95625 ай бұрын

    Great video and beautiful plane..How was the plane modified from stock to fit that engine? Did you have to move the firewall back?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    5 ай бұрын

    Thank you very much and no, the engine can be installed as normal 😉

  • @TankBuilders
    @TankBuilders3 жыл бұрын

    Thank you, what a fine model and beautifully flown, including the slow passes. No matter that the model combines several versions. The camera work could be improved, the shots were unstable, which makes the content less enjoyable to watch.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    3 жыл бұрын

    Thank you very much and I'll have the cameraman flogged 👹

  • @zock5166
    @zock51662 жыл бұрын

    Sehr schönes Modell. Mit vielen Details zum entdecken. :) Gefällt mir wirklich gut :) War das eigentlich im Original auch so das der Motor mit den Zylinderköpfen nach unten gezeigt hat ?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    Vielen Dank und ja, der Jumo 211 (12 Zylinder V-Motor) hat hängende Zylinder, Kurbelwelle oben

  • @zock5166

    @zock5166

    2 жыл бұрын

    @@RCPLANEVIDEOS Danke für die schnelle Antwort

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    @@zock5166 kein Problem, findest in Google auch recht schöne Bilder wo man den Motor gut sieht

  • @ApplevalleyRC
    @ApplevalleyRC3 жыл бұрын

    Have you had any issues with the struts on your stuka? Mine came from the factory with too much spring tension in the suspension. If I land too hard it will jump.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    3 жыл бұрын

    Hello, no, I haven't changed anything, it fits mine very well

  • @edb7742
    @edb77422 жыл бұрын

    Nice flying. Are you still flying the plane? How do you like the engine? Thank you.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    Thanks and yes, I still have the Stuka and fly it often. The engine fits the model very well, I am very satisfied 👍😊

  • @ps4kidgaming56
    @ps4kidgaming56 Жыл бұрын

    `He buddy! What kidna opto switch did you use to operate siren?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    I think it was the "Master Kill Switch"

  • @ps4kidgaming56
    @ps4kidgaming562 жыл бұрын

    So cool!!!! What exactly siren did you install? Thanks

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    thanks, it was the "mini motor siren ms-190" (red) and is installed in the bomb on 3S Lipo

  • @ps4kidgaming56

    @ps4kidgaming56

    2 жыл бұрын

    @@RCPLANEVIDEOS Did it fit inside? :))

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    @@ps4kidgaming56 yes, the siren is in the bomb under the fuselage (without housing) 😉

  • @ps4kidgaming56

    @ps4kidgaming56

    2 жыл бұрын

    @@RCPLANEVIDEOS amazing :)))

  • @dkbaron1
    @dkbaron14 жыл бұрын

    Nice, but cannons on a B model Stuka?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    4 жыл бұрын

    you have to ask Phoenix model, i know this Stuka is a mixture of B and G - but I like it 😉

  • @jasonbrand5352
    @jasonbrand5352 Жыл бұрын

    hi Markus im using 22x10 & 22x8 prop with my Ngh 60cc twin but can only get 5300 rpm ? any ideas how to get 6000rpm did you achieve high rpm ?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    you have to reduce the diameter, the propeller is too big for the engine. Try an Engel Propeller 20x11, thin propeller blade

  • @ps4kidgaming56
    @ps4kidgaming562 жыл бұрын

    What do you think about overall quality? Thinking between Phoenix or Seagull models

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    the quality was great 👍. We also have Seagull models, they are OK too 👍

  • @ps4kidgaming56

    @ps4kidgaming56

    2 жыл бұрын

    @@RCPLANEVIDEOS Is seagull with the same engine? Wondering if same engine fits ? Seagull model has 3 pieces wing , which is cooler and easier for transportation

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    2 жыл бұрын

    @@ps4kidgaming56 No sorry, I meant the seagull models in general. We don't have a Stuka Seagull

  • @kapitanfrieda4564
    @kapitanfrieda4564 Жыл бұрын

    Sehr schönes Modell, sehr sauberer Flug! Kurze Frage, hast Du bei den Landeklappen Höhenruder mit beigemischt? Wenn ja, kannst mir die Prozente mal sagen/schreiben bitte :)

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    Hallo und Vielen Dank, das weiß ich nicht mehr sicher (hab die verkauft), glaube schon das Tiefe bei war. Aber sowas kannst beim einfliegen ganz leicht Dir eintrimmen auf dein Modell, SP hatte ich auch nen Tick weiter hinten.

  • @kapitanfrieda4564

    @kapitanfrieda4564

    Жыл бұрын

    @@RCPLANEVIDEOS jo, hatte heute mit meiner Erstflug...Hatte 10% auf volle Klappen...war zuviel...habs mal auf 5% reduziert u 0% bei halber..mal gucken beim nächsten Flug, heute konnte ich nicht nochmal hoch 🤷‍♂️ Danke für die schnelle Antwort!!! LG

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    Жыл бұрын

    @@kapitanfrieda4564 also viel kanns nicht gewesen sein wenn ich mir mein Video am Schluss ansehe, die Klappen wären noch gesetzt aber am Höhenruder sieht's recht gerade aus. Viel Erfolg weiterhin mit der JU 👍😊

  • @antoniuslicha4376
    @antoniuslicha437621 сағат бұрын

    Markus, fliegst Du das Modell noch?

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    21 сағат бұрын

    Nein, die hab ich vor 2 Jahren verkauft ...

  • @antoniuslicha4376

    @antoniuslicha4376

    21 сағат бұрын

    @@RCPLANEVIDEOS Schade. Hätte ich mir zu gern mal angesehen. Bin beim Club in Vohenstrauß.

  • @RCPLANEVIDEOS

    @RCPLANEVIDEOS

    20 сағат бұрын

    @@antoniuslicha4376 also wennst zum Modell was wissen möchtest kann ich Dir schon Tipps geben, Bilder usw. vom Bau hab ich genügend, flog wirklich Klasse 👍

Келесі