This joystick kit is designed to work with any tractor without a cab that is 80 horsepower or above, and has either open center or closed center hydraulics. This video shows all the items that are included in the kit. The kit includes a 2-function loader control valve. This hydraulic control valve ships open center, but it comes with the plugs (and instructions) for making it closed center, as well. The joystick lever is also included - this attaches directly to the valve and controls the loader (raise and lower) and the bucket (dump and retract) spools. The joystick rubber boot cover is installed and protects the spools and joystick joints. A pole that attaches to the loader upright (mast) is included, as well. The bracket used to bolt the pole to the upright, as well as the bracket used to attach the valve to the pole. The installation hardware is included for bolting the brackets, pole, and valve together. Four hydraulic hoses are included - these go from the working ports on the loader control valve to the steel lines on the loader, and the oil flows through these hoses to control the loader going up and down and the bucket dumping and scooping. Two 90 degree elbow fittings are included. These are for the pressure and return ports on the valve, and convert from o-ring boss to JIC. The complete written installation instructions are also included in the kit.
Purchase joystick kit here:
www.shortlineparts.com/comple...