Jointing on a Router Table
Тәжірибелік нұсқаулар және стиль
Join George Vondriska on Thursday, February 22nd at 11:00 a.m. CT for a FREE LIVE event! If you own a router table, you own a jointer. You can easily create a smooth, square and straight edge on your router table once you make a few modifications to it. George will show you a shop-made fence you can use for this process, and how commercially made fences can be used. He'll also talk about router bit selection, set up and why, even if you own a jointer, you should learn how to do this. If you're looking for a good jointing bit, check out this one here: amzn.to/49h2Nw7
As an Amazon Associate, we earn from qualifying purchases. This means that we may receive a small commission when you purchase products through the links on this website.
Make sure to check out our FREE guide Wood Joints: Which Ones Should You Use? to figure out about joints even further! Click here to download the guide: go.wwgoa.com/a27430/
Пікірлер: 10
Beautiful day in the great state of Michigan.
Thank you for another interesting video. For wood with difficult grain, to better avoid splintering the edges, I would suggest using a "compression" bit in your router, in this joining application. A compression bit combines both an up-spiral at the bottom and a down-spiral at the top, which work together to push the edges toward the center during the cut, in compression, hence the name.
Tuning in
here in london the weather has been crap today. cold, wet, windy - YUK!
@kidsuse22
2 ай бұрын
Yuk
Nice demonstration! I think you missed a point on technique, however. It is important on both a jointer or jointing on a router table to focus pressure on the outfeed side of the cutter and not the infeed, if you want to maintain (or create) a straight edge. If you have a curvy board and you focus pressure on the infeed side, it will remain curvy as you'll just be following the existing edge and not referencing off the freshly cut straight edge.
Excellent presentation, tnx...if we are running a carbide spiral (up cut, down cut, or compression cut) bit, is it not making a continuois cut, not the seperate cuts as on a two blade bit?(David)
@Wwgoa
2 ай бұрын
The ‘Ask an Expert’ section is for members of our online community. I would be happy to send your question off to the experts. Please forward us your question to programdirector@program-director.net. Thanks! Great question!
What camera do you use to record videos?
@Wwgoa
2 ай бұрын
The ‘Ask an Expert’ section is for members of our online community. I would be happy to send your question off to the experts. To get started, please send the email associated with your paid membership. Thanks!