Absolutely INCREDIBLE. How the hell you have less than 19k subs is beyond me. You’re a true craftsman and an inspiration. Keep making more videos

@MattsWoodworks

2 жыл бұрын

Definitely putting out more videos! Lots of fun stuff coming up! Really appreciate this comments I’m working hard at it :)

That is freaking beautiful!! I am dedicating all spare time I have to learning this craft. Seriously,well done.

@MattsWoodworks

2 жыл бұрын

Thank you Michael! Do it!!

Damn!! I love this. You did an incredible job. What’s up with your fridge?!? You must have had a heart sinking moment. Would be super cool to see if this finds its way onto Joe’s podcast

@MattsWoodworks

2 жыл бұрын

Thank you! I woke up and saw that and lost my mind, like how does they even happen first off, and then to this irreplaceable can. I got damn lucky! Haha. I hope I’ll see it someday on the podcast :)

I came here after Blacktail mentioned you. I look forward to see your stuff.

@MattsWoodworks

2 жыл бұрын

Thank you for the sub!

Love everything about it, the only thing I would change is maybe tilting the ufo like its flying up

Honestly you have top content don't sweat it, perseverance will make you stronger keep up the positive energy 💪!!!

@MattsWoodworks

2 жыл бұрын

Keep on rolling!🤘🏻

Love your work and your content. All the pieces are incredible. Keep up the great work!

@MattsWoodworks

2 жыл бұрын

Thank you Cheryl!

Bro, this came out so sick.

@MattsWoodworks

2 жыл бұрын

Thanks man much appreciated!!

very cool. thanks for making the video

@MattsWoodworks

2 жыл бұрын

My pleasure!

Killer brotha. Not surprised though. Your work always slays

@MattsWoodworks

2 жыл бұрын

Thanks brotha!🤘🏻

subscribed, compliments of blacktail studio's

@MattsWoodworks

2 жыл бұрын

Awesome!!

@eddiejcc

2 жыл бұрын

Same

Awesome work Matt.

@MattsWoodworks

2 жыл бұрын

Thanks Bobby!

Awesome job.

@MattsWoodworks

2 жыл бұрын

Thank you Gerald!

Blacktail props - I enjoyed this video and admire your ability to see so far ahead in the project. It came together so nicely in the end and making a tractor beam part of the design is just genius... Very nice and well executed all the way to the end!

This is so awesome. GREAT JOB!

@MattsWoodworks

2 жыл бұрын

Thank you very much :)

Unreal job sir!

@MattsWoodworks

2 жыл бұрын

Thank you Jason!

Wow what a surprising and absolutely stunning build! - Perfect for Joe Rogan too!

Amazing work! Handling those unique items for a client turns up the pressure a couple notches. ;)

@MattsWoodworks

2 жыл бұрын

Thanks Jason! Yea man I had one shot, sweating some bullets for sure haha

Nice work bud! Keep it up

@MattsWoodworks

2 жыл бұрын

Thanks Michael! 🙏🏻

I have nothing to say really, but I appreciate your content, and wish to help with the yt-algorithms.

@MattsWoodworks

2 жыл бұрын

Thank you very much! 🙏🏻

The final look is ( ), I’m lacking the words. If I could say, as a life long sci-fi fan. Phillip head screws are not recognized. I’m glad I found your content. Outstanding work.

That's amazing 😍

Awesome job!

@MattsWoodworks

2 жыл бұрын

Thank you!

Dude! So cool!

@MattsWoodworks

2 жыл бұрын

Thanks so much!

I really like this very nice job what a nice opportunity!

Matt, you're the man!

@MattsWoodworks

2 жыл бұрын

Thank you!

Well done.

@MattsWoodworks

2 жыл бұрын

Thank you!

I dig your style!

@MattsWoodworks

2 жыл бұрын

I appreciate that!

Cool stuff, Be Well.

@MattsWoodworks

2 жыл бұрын

Thank you for the support James

Impressive!

Nice designs 👽 ❤️

@MattsWoodworks

2 жыл бұрын

Thank you Maddie!

fantastic work! @youtube bad algorithm. this vid need more than 100k views!

Very Nice

@MattsWoodworks

2 жыл бұрын

Thank you John C

That is bad ass you are extremely talented....so jealous

@MattsWoodworks

2 жыл бұрын

Thank you, don’t be jealous!

I totally get what your saying about the marking of the CA glue. If you CA glue the item, then put it upside down while glue cures. Would that not detour the marking?

you should post another video of him opening it

@MattsWoodworks

2 жыл бұрын

Was hoping to get that footage, if I do I will!

Nice content Matt! I just subscribed and already have a question.😁When do you use vacuum system instead of a pressure pot?

@MattsWoodworks

2 жыл бұрын

I believe a pressure pot is for stabilizing wood, honestly do not know 100% though

@3plecrown

2 жыл бұрын

@@MattsWoodworks A vacuum chamber is what I use to stabilize wood. Everyone I have seen use resin uses a pressure pot. It seems a vacuum chamber would be to slow and wouldn’t remove the air fast enough. Like you I’m not 100% sure.

Subbed from Blacktail!

@MattsWoodworks

2 жыл бұрын

Rock on!

Very cool.if you could have used a pen light to shine down on the can like beaming it up would have been wicked cool. Either way awesome I never seen it on his podcast but I don’t watch it all the time either

Hey Matt, what is that expandable foam stuff you used to custom form for shipping? That is super smart! Awesome build, great craftsmanship! Keep killing it!

@MattsWoodworks

2 жыл бұрын

I used the cans from Home Depot, it's called "Great Stuff" window/crack expandable foam. Thanks for the love!

@WiiNESticles

2 жыл бұрын

@@MattsWoodworks You're the man, thank you this is going to help me so much. Learning so much from your videos!

@MattsWoodworks

2 жыл бұрын

@@WiiNESticles my pleasure! Thank you for the support!

@WiiNESticles

2 жыл бұрын

@@MattsWoodworks You mind If I ask you one more question, I didn't see you list it in your description materials list, but what thickness acrylic are you using? do you use a mold release on it before the epoxy pour? and what was the special acrylic bond glue? Thanks again. curious to try one of these for a friend.

What about using a pressure pot vs a vacuum chamber/degasser?

@MattsWoodworks

2 жыл бұрын

Honestly I’m not sure, the only reason I’d suggest chamber is that once it’s sucked down you can throw it into the fridge. If it’s not a large volume pour then I’d say yea for sure use the pressure pot because you leave it in there until cured right?

@JS-wc4xs

2 жыл бұрын

@@MattsWoodworks yup. Pressure pot is designed just for that (leaving it in till it cures).

Hoi Matt, your friend at "Blacktail studio" recommend you, so I think he was right about you thank you. I am watching all of your videos starting today Ap/29/2022.

Well... If you like Joe Rogan , I like you , 👍 subscribed.

@MattsWoodworks

2 жыл бұрын

rock on!

Sooooo🤔...its been nice...👍🏽

@MattsWoodworks

2 жыл бұрын

Thank you!!

G'day from 🇨🇦 eh ! Blacktail said to have a look so l did.... Staggered man completely staggered ! Keep kicking ass it's going to be a complete pleasure watching you march to a million and beyond !! 🤟👽

@MattsWoodworks

2 жыл бұрын

Thank you my man!!!

Well that's awesome, I think you didn't align the philips heads just to piss me off though. If joe mentions you, I think this channel will splode. Here because of Blacktail. Good channel.

Time to unsubscribe unfortunately. Not really into someone supporting Joe Rogan.

@MattsWoodworks

2 жыл бұрын

Ok Josh, have a good day buddy.

@dougveazey2036

2 жыл бұрын

@@MattsWoodworks I support free speech and Joe Rogan.

@daleyotter4607

2 жыл бұрын

Bet you have never even listened to his “controversial” podcasts or done anything other than accept what to be told