Better than any form of therapy…. These videos are pure relief

I'm 7mins into this video and can already tell this is one on the best woodworking vids I'm ever likely to see.

Uncle Jim, what an absolute pleasure and joy to watch you .Jim you have just given me the motivation to get back to my bench and shop. Rgds Bill in Galway 🇮🇪

@TonyMonaghan-zf6yp

2 ай бұрын

Ha ha..feeling the same here in Wicklow!!

@randyrru

2 ай бұрын

Hi William, not sure if you were aware or not, but Uncle Jim (Jim Kingshott) passed away from cancer in 2002 at the age of 71. If you knew already I apologize for bringing it up by way of this comment; as well as acknowledge your regards to his memory.

Te felicito por subir el video lo mire hasta el final me parecio una clase incleible! Sin desperdicio ! Hojala sigas subiendo de este maestro 🇦🇷👏

A real pleasure to see , listen and learn . Thank you .

What a PROPER tradesman

Wonderful. Thank you.

Being a retired joiner I would loved to have met him would have been very interesting.

Thanks for uploading these. I had the series on VHS but no longer have the tape player or means to copy them.

First class craftsman, a joy to watch, thanks for the upload.

(1:05) ...too wonderful for me! Time has borrowed this man from 1725!

Thanks Jim.

A very very interesting document ! An instant classic !

A wonderful and most informative video. Thank you so much. I will be back.

that quirk plane is so cute, I want one lol great video.

Excellent, thank you.

So good!

What a passionate and proficient woodworker, he was. Very inspiring video for everyone who loves to work with wood 👌

Just THANK YOU. Regards Ruaidhri, Dublin

Wow! What a well presented video on specialty planes. While I am interested in learning about all of these tools, I was fascinated with his proficiency in that he did the entire first thirty minutes in a single take and was able to talk and create at the same time without a single stumble of voice or woodworking. It reminds me a bit of The Woodwright's Shop which was also done on a single take. Or Alfred Hitchcock's Rope which was made in very long perfectly executed takes.

@Dovetailtim

2 ай бұрын

I’m really glad you liked it, thanks for your comment!

Brilliant videos. I still have Jim Kingshotts VHS on sharpening and it is also brilliant. What a find ..... Have spent the last couple of days watching .... Really inspiring. Thank you for putting these up .. subscribed.

Wow, some really obscure planes i had never seen before, and some info jems, a wealth of knowledge, looking forward to more, thanks.

Reminds me sooooooooo much of college all over again,except my tutor was a maltese gentleman.......brilliant

@johnburrows9558

2 ай бұрын

I remember him hating power tools 😂😂😂😂😂

What an inspiration! Please help those of us who aspire to your skill level by doing on a video on Sharpening!

@Dovetailtim

2 ай бұрын

It’s coming very soon! Thanks for watching..

Wow, this is invaluable information and a joy to watch. I have one of Jim's books and it is great. Do you have any material from Jim about the Stanley 45/55? Jim is only briefly referring to them as great tools in this video, I can't wait to see more!

@richardbirkby1666

2 ай бұрын

100% agreed. I'd love to see any information given on how to make mouldings with combination planes too

São muitas feramentas... Não conhecia a plaina com o ferro de corte meio de lado, interessante. Gostei de ver,, obrigado!

Fantastic video!

This is what you get with a proper Apprenticeship set up by generations of skilled craftsman. They where taught by guilds or other societies set up by forward thinking Industry leaders. Unfortunately those in Power Government who knew nothing about this pulled the funding and gave it to National Vocational Qualification. A group of people with none of these skills who managed to grab the tax payers money. The societies had all the skills and ran their bodies, NVQ you tell them your skills and write it their way so it sounds like they wrote it and then away it goes. Apprenticeships nearly slid into Oblivion somebody realised that something used from before the Pharos what not really needed. No training at schools on woodwork metalwork cooking etc all to save money. It’s like someone paid deviants or other delinquents to destroy the UK industries. Now we import skills from other Countries who still use the same methods we destroyed in the UK. Apprenticeship’s are being re-invented now as the skill shortage has got to such a bad extent something had to be done. Luckily there are still some skilled craft men’s or women who want to train the next generation. Imagine doing an Apprenticeship with Jim.

@petercastles5978

2 ай бұрын

Yes Anthony, same thing here in Australia. I think it is all planned, and from long ago. I am a Saddle maker, and after the Lima Agreement of 1975, or there abouts , what was hanging on just got bulldozed over a cliff. Now only top shelf saddlery is made here in Oz, as no one can compete with imported rubbish. Most of out tanneries are gone, along with thread makers, serge, tack, rivet, press buttons etc etc.If the few places in the world haven't got what you need, then tough luck. I am talking about the good gear, made by proper tradesman. What we have now is a lot of self taught people, talking down the good gear to customers to sell their ordinary stuff. Then they will advertise themselves as a "Master". The Lima Agreement sounded good. It was about helping the poorer countries with industries, but by giving them our industries we have impoverished ourselves, and made the odd monster or two.eg China. Our youth have been the ones who have missed out badly. It has happened everywhere in the west, just look at Detroit.

Wow! A real carpenter. Subscribed.

Blooming fantastic! Where did this vid come from?

@wrstew1272

2 ай бұрын

I would venture England…😊. They used to train young men to work accurately and rapidly via an apprenticeship, where a salty old man would train newcomers how and why to build wooden items for everyday use. An unheard of practice nowadays. You might cut your self with the razor sharp tools needed to shape tough figured hardwood 😂

Beau travail !

Is there a hint at the beginning that moulding planes need straight wood without any knots? That was where I always ran into a brick wall . But I just bought an aprom like Jim`s as it feels so right .

I have his book on sharpening! Me pointing at the screen after getting algorithm’d this video

👍👍👍

These videos are excellent! Thank you for posting. Any chance of the mortise and tenon video coming up as well?

@Dovetailtim

2 ай бұрын

It is coming, just trying to find it currently! Got some of his old VHS’s on sharpening too that im trying to convert…

@surfride219

2 ай бұрын

@@Dovetailtim Oh I didn't know a sharpening one existed! I'm looking into buying his book on it, but a video would certainly add some value to my learning. It's been really great to see just how easily hand tools can make a task, especially when done with sharp tools and a confident hand. (I've never seen anyone cut half-blinds without chopping!) Anyway, thank you again for posting. Eagerly awaiting the others from a new Sub! 👍

A wooden plough plane is currently around $350.00 to unbelievable $ in the U.S. Since a couple of people on UTube have started the hand tool revolution, what was considered dusty old has-beens 😢 are now like hens teeth. I am jealous of some of the wood that I have noticed in your videos, scarce to unavailable here 😮. Probably from your well stocked “stash “ acquisitions from over the years?

@bakerzermatt

2 ай бұрын

This was made about 30 years ago, so yeah, a lot has changed. Looks like he died in 2002, RIP.

Once again another video treasure. Again, interesting to see how he uses Japanese tools and perhaps (more importantly?), why! Food for thought....? Have you got his one of sharpening Tim? That would be so worth posting.... Many thanks for posting. Regards, Chris

@Dovetailtim

2 ай бұрын

Two videos on sharpening! Taking some doing to convert VHS to actually usable video/audio! Shouldn’t be too long till I have them up..

@chrisbailey600

2 ай бұрын

😊

ㅎ

So Jim, I would take those infills you made and get them out of your sight. Wouldn't charge you a lot, either !

@Dovetailtim

2 ай бұрын

I’d split the cost with you buddy!

People like this would have been worth their weight in gold on a ship in trouble like the guy who prepared the rowing boat for Shackleton to get to St George island really skilled people

So we just showing off at this point. Teach the youngsters something without those pricey antiques before there is no more youngsters interested in the craft.

@federicocucchetti7710

Ай бұрын

The video was registreresti in the 80-90s

@michaelking2910

27 күн бұрын

This is real traditional carpentry, it’s educational for new comers and time served tradesman. If you can’t tell from his videos he shows cheap and cheerful tools and of course expensive. Bare in mind this man died in 2002 so I don’t think he’s showing off 😂

@jerbear7952

Күн бұрын

What youngsters are you teaching?

@michaelking2910

Күн бұрын

@@jerbear7952 what do you mean?

Did u ever get Jim’s tools back?

@Dovetailtim

2 ай бұрын

I wish! I’m not certain they were ever found fully.. I think some turned up on some websites here and there..