To see a beginner friendly step by step guide on setting up a plane visit our sister site, Common Woodworking: commonwoodworking.com/bench-plane-setup/ For more information, see paulsellers.com or woodworkingmasterclasses.com

@INVICTUS9100

5 жыл бұрын

Thank you for the superb video Mr Sellers.

@natesnyder7259

5 жыл бұрын

I love the brush you use for applying the shellac. Where did you get it?

@brigittekunetz7722

4 жыл бұрын

INVICTUS9100 l

@ernestwhite8513

4 жыл бұрын

INVICTUS9100 manly

@swmoboy

4 жыл бұрын

Paul Sellers v

Such beautiful and passionate words in the end, where you sad "if i had 50 more years in woodworking it would last all my needs". I'm a 17 year old boy from Sweden that seriously enjoy whatching all your vidios on youtube, they inspire me and got me motivated, so tomorrow i'm going to try to restore some of my old grandfathers tools! :)

@EscapeMCP

7 жыл бұрын

Go Hugo! :)

@cavemanjoe7972

7 жыл бұрын

MrZeerix How'd you do with granddad's tools?

@ldwithrow08

6 жыл бұрын

I understand the feeling. I am in my seventies and have finally settled down in one place long enough to get a real shop set up. If I work all day every day till I die, I don't have enough years left to do everything I want. My advice: Start young as possible and settle down as soon as you can. You only get so many years so make the most of them.

@watermain48

6 жыл бұрын

I'm right there with you. Glad to have Paul Sellers to learn from.

@Hippiekinkster

5 жыл бұрын

CHECK OUT SOME JAPANESE WOODWORKING & CARPENTRY VIDEOS... YOU WILL BE MESMERIZED!

I usually fall asleep during restoration videos, they like my asmr version. But when Paul speaks and shares his woodworking life lessons, I just cannot miss out on him. You are a human treasure sir.

Is it just me? Or does anyone else find it EXTREMELY gratifying to bring these old girls back to life? I was a Garbo for years and rescued heaps of old bench planes. So fun reviving ol’ Rusty back to a gleaming happiness.

I love the pragmatism in restoring this plane. No faffing, just doing what's required with no garnish. Great job!

Can't thank you enough Paul. I've just fully restored a completely unloved Stanley No 4 - Type 19 (1948-1961) that I picked up in a junk shop for just $5, in almost real time following this video. I've turned junk into gold with your help.

Paul your instruction has once again given life to a plane my late father had over 60 years ago. It’s like it just woke up. Superb video. Thank you so much. Rob.

@beinghuman665

Жыл бұрын

just watching this now. To restore and I am from Burma much willing know to know when it manufactured its rusted and appearance seem hopeless but still work amazingly well. it was given to me by the one who saw my passion for woodwork and love for planners. he handed it over to me.

As a novice woodworker I have been achieving very poor results with a an uneven rough finish and excessive tear-out. I've just followed Paul's steps on a Stanley #5 and the difference is utterly incredible, the plane now glides smoothly, produces a uniform crisp shaving and leaves a silk smooth finish. Working over a previous area of severe tear-out now leaves a perfect finish. I now understand how Paul can achieve such excellent, precise results, so all I need now is about 40 years practice :)

@robstevens180

Жыл бұрын

@Doc Zoff, would you mind sharing the link for the particular video, Please. I am a novice, just received my first 2 , a block and a bench, used handplanes, I could really use some help on properly setup and adjusting. Thank You

@mattmatt222333

4 ай бұрын

How much did Paul pay you to say this?

So often when I've gotten impatient with myself on my own restoration and woodworking journey, watching one of Paul's videos seems to bring me forward a bit. And I keep going.

Paul, this procedure is exactly what I've needed. I followed this and restored a #4 plane and I.. am.. amazed. I have never ever used a plane that works like this one does now, after your restore/sharpening/setup procedure. I had no idea that a plane could work this smoothly and precisely. Thank you so much for sharing your most amazing experience and wisdom with us all.

I love listening to Mr Sellers explain anything. I was needing this information, but I could listen to him explain how to tie your shoes. 😄

@chancemiller9340

4 жыл бұрын

ASMR

Paul is definitely inspirational. I recently suffered a table saw injury and started looking into more hand tool wood work. Paul has inspired me to take it by the horns.Currently I am restoring an old Fulton plane and very excited.

This is the best hand plane restoration video on KZread. More time spent on preparing and aligning the surfaces necessary for the plane to plane perfectly than purely cosmetic aspects. Learned an enormous amount. Many thanks.

A thing of beauty is a joy forever. Thank you Paul for your willingness to share. I've been laid up in hospital with a gammy leg for the last two weeks and and have been binge watching your videos. I am exceptionally chuffed to find that I've (by and large) been doing things the same way as you do. But what's really nice is to see things I'd puzzled out by myself (with considerable help from "Woodworker" magazine (UK)) confirmed by a real pro. As a now (recently) retired Civil Engineer, I look forward to returning to what I really love. Messing about with tools of character and bits of loose wood. Old codgers' Valhalla...

My late dad was a furniture maker. I love these videos because Mr. Sellers does so many of the things my old man used to do, right to the way he moves. So many details, the ad-hoc tools they make, the jigs, everything transports me right back to my childhood.

I first thought.... I'm never gonna watch this whole video! But 3 mins in and I knew I was in for the long haul and so glad I did, I'm a 48 y.o female who has been self teaching myself for about 5 years with any tools I can find or afford, this has absolutely inspired me get out my Dad's old planes and get to work bringing them back to life, can't wait to start using them and GET ON WITH LIFE! Thank you so much for sharing your experience and wisdom with the world, can't wait to start binge watching all your videos!

8yrs after your post, @Paul Sellers, this video is so helpful. I just received a Stanley Jack plane from someone who stored it in his damp basement for over a decade. It is super rusty, but the blade appear salvageable and the sole looks like it’s worth the effort. I’m concerned about the copper adjustment know and the pressure cap (not sure what that’s called), but I’ll give restoration a go. Thank you for this video, which gives me hope.

I’m 73 and just dug out a rusty hand plane my Dad used to have. I’m going to try and do what Paul did and use it instead of my power plane. I cleaned it a bit but it’s far from perfect. I have subscribed because you explain everything you do so well. I need 50 more years to get to anywhere near this level of woodworking expertise but I’ll give it my best shot. Thanks from South Australia Paul.

Brilliant video Paul, I’m just away to get back into my workshop which I established 16 years ago. Tools will need a bit of refurb but metal tools I can deal with, power machines I am a bit apprehensive to fire up. Never mind, I stumbled on your channel a few week ago and have watched most of your videos fantastic. You truly are a master craftsman and glad you are passing on your skills, I’m not much younger than you 62 but still keeping my hand in, take care and keep up the fantastic work 👏👏👏👏👍

I've learned more about tools and techniques in a few weeks of watching Paul Sellers, than I learned in years and years of "Hard Knocks". I love that Paul films and publishes his craft. Huge thanks!!

Man I would love to come to an in person class! And Paul.. Remember this, you really do have another 50 years plus of woodworking ahead of you.. Unless KZread is ever deleted my kids will be able to watch your videos when they get older and get into woodworking well after you and I are both gone!

Working on a Stanley #4 right now. This is incredibly helpful, especially to help me differentiate what's important vs. what's not. Thank you!

I wish you had another 50 years for woodworking and I wish I had. Thanks for the video, Paul!

It is a joy to watch a true master at work, thanks for all the videos.

Thank you for this tutorial, and your other videos! My dad and granddad always told me to take proper care of my tools and equipment, but I never had any formal training as a woodworker (and neither had they). Now at least I know a little about caring for my tools, thanks to you. These days the impulse is to replace rather than repair, and while I can finally afford to splurge more than a little on new high-end tools, your videos did inspire me to make a few of my own instead, or to give old tools a new lease on life. I recently picked up a sadly neglected #4 Stanley bench plane from the 70s, got it back into good working order, and it's just so satisfying to use a tool that you've personally improved, restored or made.

I partially restored a couple of planes last year, but they still don't run quite as well as I'd like. This video did a much better job of explaining the process and I'm excited to tune them up again. I'm really glad I restored some old planes instead of just buying new ones or having someone else do it. It really helped me to understand how the plane works and what sort of things affect it's performance. Plus, now if I want to buy a new plane, or I'm looking at others to restore, I'm confident that I know what to look for.

"And get on with life really" great quote.

Thank you so much! This was so helpful. Im a young carpenter with 10 years experience and now seriously getting into hand tools and our culture. I dont have any older mentors so these videos are priceless to the new generation and i! Its our responsibility to practice the trade and keep it going :)

hello Paul. great programme. i was the carpenter at Bressingham Steam Museum, Norfolk, when i got demobbed from the Royal Engineers. when i had a few minutes spare, i did exactly the same to my planes ( which i still have). best wishes

Thank you, Paul, for your videos. They have been very inspirational to me. I'm well into my 40's and after having had shoulder surgery I have taken up hand tool woodworking as a new hobby. I find that woodworking provides a wonderful blend of cerebral engagement and physical activity. I especially appreciate the quietness of hand tools especially when compared to their powered counterparts.

Thank you very much sir! im a beginner and sharpening was the one that always put me down, now i fully restored an old plane and thanks to you now it looks better than new because i put my soul into restoring it and it shaves perfectly. you not only restored a plane but you restored my passion in woodworking! greatest respect from Australia 😊

Watched this 5 or six years ago. Started with a no.4 Stanley. Fast forward, and now I've restored combination planes, tongue and groove planes, rabbit planes, transitional planes, and have quite the collection, with some peices dating to the late 1800s. All in working order. And it started by watching this video.

A very simple, practical way to take a plane from rustiness to truly fine condition. Once again, thank you very much, Mr. Sellers!

i have been a furniture maker for over 20 years but still enjoy watching your video's. and yes this old dog has picked up some new tricks lol. there are very few actual craftsmen producing video's; but an awful lot of wannabe's with no actual training, so this content is very important for people interesting in learning the craft correctly.

@fe3613

4 жыл бұрын

Do you recommend young people get into the furniture business?

@bighands69

3 жыл бұрын

@@fe3613 Do you mean be a furniture maker? My suggestion if you had the opportunities would be to do bench joinery and then Architectural technology or Architecture. And if you can combine those fields with a good work attitude you will become successful. Whatever you do please do not get in debt to start is business if possible because it makes if very difficult to succeed and if there is debt try to keep it lower. I trained in woodwork as a child with my grandfather who was an arts and craft carpenter and then I went to medical school and I ended right back at woodworking and own several small businesses in that field. What Paul Sellers does is pure craft based and if you start from that foundation your skills will be beyond most of the marketplace.

@fe3613

3 жыл бұрын

@@bighands69 Thanks for the reply. By "architectural technology or architecture" do you mean 2 and 4 year degrees? I have learning disabilities and can't get a degree, do you recommend anything that doesn't require a degree, or is it not likely to be able to make a good living that way?

I remember meeting Paul when I was 12 or 13 when he was at Homestead Heritage in Waco Texas. I love that he's making incredible videos like this. I'm working on restoring several hand planes and am glad to have this guide to help me learn how to do it the right way.

Thank you Paul for this video. My grandfather was a woodworker. When he passed, my dad received an old plane that my grandfather had used in his shop. My father is now ailing and has passed this plane to me. It is in bad shape and thanks to this video I now know how to restore it for my son to have. Great job

I used my father's old, inherited Stanley No. 5 this evening. Then I ran across this video as I was unwinding for the night. I am inspired. Tomorrow morning's project is getting Dad's old friend into tip-top condition. Many thanks.

Thanks so much for this. I've just restored my grandads old Marples no. 4 which has lain unused for at least 20years. It's come up pretty well but the cutting iron still needs some work. From knowing nothing about these planes I'm now confident I could keep the old Marples going for another 50 years.

@bighands69

3 жыл бұрын

I have my grandfathers 1920s hand planes which are a collection of wooden planes he made, Stanley planes and also custom cast Iron planes that he got made by his brother. There is no reason your planes could not last 100 years.

This is a great video that shows a step by step restoration by a great master , Paul Sellers. Mr Sellers is a prolific teacher and master craftsman. His videos are some of the best on woodworking and all things related to same. An excellent video, thanks.

Tomato can + rolled rag soaked with 3-in-1 oil: genius. Every video from Paul is fabulous, each with so many little great tips like this one.

Paul, this video is going to be known as THE video to watch when you are restoring your first hand plane. Love the attention to detail!

Fascinating and I've been spellbound since finding you Paul KZread needs more guys like yourself, legend! 😊

Thank you Paul! After watching your video, I visited the nearby antique dealer and got an old Stanley #4 for less than $20. Three hours later it was as good as new.

I have seen a number of KZread clips on restoration of hand planes. This makes the most sense. No vinegar or rust removing chemicals just good old fashion hand polishing. Thanks Paul for video.

There are only a couple of people whom I consider worth watching for a little over an hour. Paul Sellers is surely one of them. Excellent video Paul, thanks for sharing your time and talent with us.

"Be happy with nice steel surface you've established and get on with life" that tickled me

I have lost count of how many times I have watched this video, as good as two weeks holiday every time.

I have watched this twice now and I have a new love for my old Stanley planes. It is always tempting to splash out and buy an expensive ‘perfect’ plane but using a plane that has faithfully served many woodworkers over the years and doesn’t need retiring just seems right. Thanks so much for sharing your experience.

26:02 Good practice, if trimming a bolt like that, is to find a nut that fits it before you start cutting the end of the bolt. Thread the nut part way down the bolt, then make your cut. Now when you remove the nut, it will serve as a makeshift die to clean the bolt threads on its way off the bolt.

@konstantinivanov1986

6 жыл бұрын

You go find a nut that fits a stanley post those threads havent been made since ww2

@georgehelliar

6 жыл бұрын

Konstantin Ivanov it's still a useful tip, even if it might not be practicable in this case

@2shoestoo

5 жыл бұрын

Craig Slitzer yes it’s called chasing the thread

@tjenahoj

4 жыл бұрын

@craig slitzer. Good tip, very true. Another tip built on same principle is to put 2 bolts on a long screw or threaded bar and hacksaw in between those bolts to desired lenght.

@lucadorigo1813

4 жыл бұрын

That's a great tip, I wasted so much time with files trying to re-thread the ends of a bolt after cutting/filing it.

Wonderful presentation! I have three+ generations of many planes from my father, grandfather and family! They where all carpenters, cabinet makers and boat builders. I’m going to get them all in shape!

Second time I have watched this through. I love your information. It is great to hear someone that is not trying to impress everyone with your ability to make a plane look amazing, but focus on making a plane that functions amazing. But, it still looks amazing as well. I am glad you kept it looking as it should. Thanks again for sharing.

Many thanks for this Paul. I've inherited a cabinet full of old hand tools from my late Grandfather, and I really want to let them go to waste. He taught me how to turn lace bobbins on a lathe he built from scratch when I was a child; now that he's gone I feel a part of him lives on when I use my hands working with wood. I've been scratching my head thinking it was going to just be too hard to restore his rusty set of planes (he lived near the coast and the salty air has gotten to them), but after watching your tutorials on restoration and blade sharpening, I'm much more confident now. I'm now really looking forward to the challenge and doing my Grandfather proud in keeping his tools in the condition they should be. Thanks once again.

Even with a new plane out of the box, I do a disassembly and do a lot of polishing and sharpening. I've only bought two new ones in my life and have had to work on both. I have a half dozen assorted planes now ranging from a Tru-Value Master Mechanic to a Sargeant Hercules. All of them came from yard sales, auctions and second hand stores. I spent several hours apiece tuning and refurbishing them. Even a cheap plane can be made into a very functional tool with a little work and constant care. Considering how much regular maintenance is needed to keep a hand plane in good condition, the original cost is only a fraction of the value.

Thanks SO much Paul. Have been restoring my 45 yo #4 after 40 years of no use (long gap :)) Some tips there that I really need to take on board, but even more, some sage advice as to what NOT to stress over too.

In a throw away society it is so refreshing to see quality tools restored.Pleasure to watch a true tradesman at work.

My dad was a joiner throughout his working career and stupidly I wasn't interested in woodworking. What a missed opportunity. Now at 56 years old I find woodworking facinating. I may even have a go myself. Thank you, Paul for these marvelous videos. You show how it's done and how to take care of your tools. You do this in an easy to understand method. You Sir, I take my hat off to. Not only are you a master craftsman you are an excellent teacher too.

10:50 golden words: get on with life...

Brilliant Mr Sellers, just what I need to restore my Stanley plane. The end result here is superb, no harsh machined edges, just perfect.

After watching this video a few times I had the confidence to purchase a second hand Stanley Bailey no4 plane. I got it cheap because it was a bit rough, I spent around 2-3 hours then managed to take a transparent slice of a piece of softwood. Thank you so much for giving me the confidence to do that.

Years ago, when I had no money to setup a workshop, I stumbled across your videos and purchased some hand tools. A Record No.4 plane, some good chisels and other stuff like the Veritas Mk2 honing guide. But I never really came to use them. Here I am again, 7-8 years later, now 30 years old and married, still not able to purchase big tools and still without the space for a huge workshop. At least I got a one-car garage now, which luckily doesn't fit our VW Passat because it's too small :D and a room in the basement, where I can work now. I reground the Record yesterday and today in the morning, after reading some of your blog posts, I went for the hunt for a small block plane. Good news: I won an auction today for 10£. Bad news: it includes a Stanley 130 block plane AND a Stanley Handiman No. 4, and I gotta pay shipping to Germany :D Other bad news: I still got three auctions running, where I am highest bidder currently. All in the same price range, all for block planes :D I will try to restore the ones I get following your videos, and if I don't find them useful (included are a Stanley 9 1/2, 102 and 110), I will sell them restored. Now I want to make some stuff like a shooting board and a thickness planing jig, since I want to use them for some first Kumiko experiments and maybe some other small woodworking projects. Thanks a lot for your videos and guides, they are really helpful!

Fantastic tutorial. I enjoyed watching every moment. You have a talent for teaching aswell as woodworking. The oiled rag in the tin....what a wonderful little tip! Keep up the inspiring work!

What a beautiful plane restoration Paul, I hope you do work for the next 50 years in woodworking! Thank you for your virtuosity!

@sritchie1272

6 жыл бұрын

Ronald Kearn the one in the video is a bailey plane

@henrysiegertsz8204

6 жыл бұрын

NO, it was a Stanley Plane! Watch the video again!

@lxkhn

5 жыл бұрын

The Bailey line of planes manufactured by Stanley

@green_building

5 жыл бұрын

Yes i wish Mr Paul is only 30 years old now.. So we can have him here for quite long to come

thanks for a life time of experience shown here in your videos , i hope you got a 50 years more of wood working using this plane

Thank you Mr. Sellers. I just restored a Stanley #4 and #5 after watching your video. They were both in about the same shape as the one you just restored. Now they look great and run even better. I love seeing old tools restored to new and usable condition. Most older tools are much better quality than new ones today.

I was waiting for this video since I got my first plane! I haven't seen one that explained how to adjust the frog since now. Gotta work on it this weekend. Thank you very much.

@lindanwfirefighter4973

3 жыл бұрын

Federico Muratori check out Mr Chickadee channel also. He is good also.

Thanks for making this hour something worthwhile.

I have been learning about restoration and about how planes really work for several months now. I kept asking myself why are the restorers lubricating the internals of the plane to make it move easier. And why must I remove the blade to adjust the frog… you have put all my questions to rest in this presentation. Thank you. Also the belly buster hammer blow technique is solid gold.

Thank you for sharing. Just got hold of an old stanley handyman and can't wait to bringing it back to life after watching the video.

Absolutely incredible video! This is the video P. Woodworking should have made decades ago, and didn't. Good timing also, I just bought a 99% nearly new #3 Stanley that has been in a collectors possession for many years but was for show only. I have a tip for those with less experience than Paul: When adjusting the blade to get it just right, a magic marker line across one side of the flat in the adjusting screw will let you deal with the backlash and come back a nudge more or less with ease.

Thank you for such a full and informative demonstration. I just inherited an old plane from my father that's rusted to death and likely not been used in 20 years or more. I now look forward to getting it back to working order!

I have been watching your videos and I have to say that I've learned more from you than anybody. You're a remarkable teacher and I am going to watch all of your videos because I've never learned so much from one person. I'm slowly getting the things I need to start making things and I want to do them by hand. Thank you for all of your help.

I followed you step by step and I can’t believe what I’ve accomplished!! Thank you so much! Mike

Thank you sir. Just getting into woodworking and was able to get 4 planes at yard sales. Looking forward to using them.

Hi Paul, thanks for your exciting tutorial, it is inspiring, especially on my Father's very old Nr 4, ex WD plane. I am sure that he would be more than pleased to see it now with it's bright shiny and so efficient new life, sadly, he is no longer with us. Many thanks. Cy O'Hara

Every time I watch this, I learn something new! Viewing 3rd time. You make it look so easy but there is so much to it. I bought a rusty old #4 and am in the process of resurrecting it. Fun. Thank you Mr. Sellers!

Hi Paul, I have recently subscribed to your channel and watched a number of videos. Your calm and supportive delivery is both encouraging and pragmatic. Clear, concise and practical. This particular video is poignant for me as I discovered three of my dad’s old planes tucked in a corner of my workshop just yesterday and today I’m popping in to start the restoration process for all three. I do own and use my own planes but ignited by your description of the man who’s used that plane before, it’ll put me back in touch with the man who taught me. Many thanks for the insights you provide. W

I just picked up an old Stanley 4 from a seller on eBay. I can't wait until it arrives so I can restore it using your video as a guide. Thanks for such an in depth look at it.

@christofear

5 жыл бұрын

I did as well, how much for you pay for your

Thank you! I bought a cheap "Stanley" plane, prepared it following your instructions, and it works very well. Best, LRP

Ironically I found two old rusty planes today and THOUGHT I had restored them. Now watching this, I have to start all over again, because I learned so much of what I’ve done wrong. Thank you

This has inspired me to do something I've been meaning to do for three years now and start restoring my Grandfathers tools. He was a joiner all his life and I hope I can do him justice by getting his tools back into shape.

I just did this to a Stanley #4 and there was an additional problem not mentioned in the video. When I put the plane back together, the lateral adjusting lever had to be positioned hard right to get the blade to project evenly across its width. Close inspection showed that the frog was not sitting quite square in the plane, so I filed one of the bearing points a little to get it to sit flat. This solved the problem. The lateral lever is still not quite centred, but I put this down to my novice blade-sharpening attempt that left the blade very slightly out of square. This is no doubt what the lateral adjusting lever is meant for.

@musamor75

5 жыл бұрын

A blade should ALWAYS be ground dead square across. That's rule number one. The lateral adjusting lever is for very fine tuning. The frog adjustment is for closing the mouth when working with wavy woods to avoid tear-out. There are some very serious sharpening grinders out there, that maintain the angle. One of the best is Tormek. This brand uses a water stone that turns slowly- absolutely NO blueing the blade and distempering it. Unfortunately Stanleys are much cruder than they appear; they were never really ground square, and the adjustments left a lot to desire. For the last fifty years the tool steel is of appaling quality- you can never get a keen edge. Today the Veritas and the Lie Nielson go way beyond what Stanley ever achieved. If you tried one you'd never go back. Both of these brands make beautiful precision tools. Of course, they are outrageously expensive, but quality pays. Actually, the number 4 1/2 is a much handier plane- more weight, and more width. Weight helps a lot, even for smaller work. I'm not disagreeing with anyone; I've salvaged a good amount of old tools in my time, but it's good to move on and discover improvements. Try out one of the above-mentioned planes, and you'll see the revelation.

Great info. I love it when someone smart agrees with me. love the simple way you teach us how to do things.......Ross

Thank Paul, for yet another helpful & extremely practical Master Class! Since learning from you the series about sharpening & honing, either chisels, gouges or planes, I have managed to restore (and salvage...) 3 planes. They are now in perfect working condition. So, thank you again, for investing your time & effort, in teaching us good habits of preserving & maintaining tools. It's a wonderful journey indeed!

Another great video. Sound keeps coming and going though. Liked.

@apinakapinastorba

8 жыл бұрын

+John Kirkwood I have managed to watch only few minutes, lets see :D

@JohnKirkwoodProFoodHomemade

8 жыл бұрын

+apinakapinastorba Cheers, apinakapinastorba I will persevere with it.

@marshallballantine-jones3819

2 жыл бұрын

My favourite English chef commenting on my favourite master woodworker - happy days!

I love the colour on the tote. What dye did you use in the shellac?

I watched this video once again from start to finish and have to say - looking at the start of the video and what Mr. Sellers ended up with were like night and day. That old plane looks as nice as any of his standard daily users. The tips and tricks of smoothing the edges and rough surfaces is genius and something I have gone back and done on my own planes as well. What a great video this is - saved another beauty from the scrap pile!

Paul, I'm a total beginner and found your channel a few weeks ago. I am so happy to be able to embark on this adventure under your guidance. Thank you! ... I got delivery of my first Stanley plane, an old 4 1/2, a few days ago. This weekend I'll be restoring it.

Mr. Sellers: My father was a iron and metal craftsman, and he would use molasses to remove heavy rust from vintage iron tools. After which time we would sharpen and restore the hand tools. Have you ever used that process to remove heavy rust? I'm not sure if molasses is a commonly used ingredient in the U.K.? Thank you for the videos and the manner in which you teach. Thank you again and blessings to you and yours.

@bfflorida2311

7 жыл бұрын

D. Dominguez , that is old school. . Not best for heavy rust, light surface rust and keeping original patina.. yes... I still use that every so often. . thanks for sharing. .

@radoczi94

7 жыл бұрын

I use a bench grinder with a wire brush wheel on it.It removes the light and heavy rust, and all it leaves is just the blackened steel, the patina.You may want to use an air filter mask for this kind of job.

@wsp4th

5 жыл бұрын

I usually use a soak mixture of course salt and white distilled vinegar, followed by mineral oil soaked grades of #0 through #000 steel wool

Paul, you never cease to amaze me...when I think you can't teach me any more, you prove me desperately wrong! Thank you for what you do, friend...

needed this, I inherited my grandfather's old planes, a Stanly number 7 I think, it's like 17 or 22 inches long and a Stanly shallow cut one, both are in need of love. I feel confident now to "fix" them, meaning hone them in like you just did, very little rust on the surface. There is something really soothing to working wood with your hands, I do have all the power tools I need, but I believe if you can do it by hand, using hand tools, you can be even better when you have the power tools, either way my grandfather will be proud looking down at me, using his old tools to make beautiful things!! thanks for your time!

Too bad I can only give 1 like per video

I lent a favorite plane (ship builders plane from mid 1700’s) to a ham-fisted friend who pressed too hard, ran the blade backwards and forwards and left it in the yard in the rain for the week with his project....grrr... i graciously took it back, fixed many issues caused by mal-use and mal-treatment and put up a giant sign over my shop door saying “Don’t even THINK of borrowing my tools!” ...I think the hint was taken. When you have over $100,000 cost in tools, you make your living and lifestyle from those tools - you dont leave them in the rain or lend them willy nilly...sorry if that sounds selfish or rude

@Frankowillo

5 жыл бұрын

I agree with you 100%. Most people don't give a damn if it's someone else's tools they're using.

@willclevett7560

5 жыл бұрын

You use a plane which is over 200 years old and lent that plane to a person?!

@markkieran1004

5 жыл бұрын

Never lend tools with edges or faces

@danhartman9087

5 жыл бұрын

I'm with you Cow Conspiracy!

I put an old soldier, s US built No.5 today, from the parts bin, today. It was rough but it's just marvelous to see an old tool come back to life. Thanks again Paul.

You are a craftsman and it shows. Glad I found your channel. I have an antique bench hand plane and need to restore it. I refinish wood as a hobby, though I have not used shellac yet. It is a fine old finish but not durable. I like everything to be durable and solid as a tank. Why use shellac on the wood handles? You might be better off with Polyurethane. I would strip and sand both handles, then lather them up with boiled linseed oil, wipe off excess, let dry 1-2 days, then coat with diluted oil polyurethane - 2-3 coats. This will last a lifetime with no need to redo. Wood grain shows up beautifully, oil conditions the wood so it does not crack. I did all my garden tools this way. They are waterproof and crack proof. When you thin out the poly to 50% or 60% with mineral spirits, it soaks into the wood. Now the wood gets very hard and it acts like a glue preventing any cracking. The BLO is like a wood conditioner for thirsty dry wood. I love this method (my own) and I do all furniture with it. You can wax or oil on top of the poly. Since the poly is diluted, it is not tacky and you feel the wood below, so it looks like a hand rubbed finish. Try it sometime. Any area of rust (except the bottom or blade) gets a spray of Loctite Rust Neutralizer so no more rusting anywhere. It might work for the bottom too, if very fine spray, then a wax coating to slide well. Solves the rust problem. With regard to fixing your blade, get a grinding stone. You save on paper. Its silly to spend valuable minutes of your life and to tear up your hands on manual grinding. Makes no sense at all. One bench grinder with two wheel grits - done in 2 mins or less.

Can you do a video sometime to explain the difference between the numbers of theplanes and what they are used for? Bench vs. block, vs bullnose,vs low angle, etc... I would like to start using more hand tools and less power and don't know which ones to buy for the projects I have in mind.

@Erowens98

7 жыл бұрын

The numbers refer to the size of the plane. A bench plane is the style you saw in this video. A block plane and a low angle plane are the same thing. In them the angle of the blade is much more acute for endgrain work. A bullnose plane, also reffered to as a shoulder plane is a plane where the blade is flush with the edges of the plane. Here is a link that tells you what the different numbers mean on stanley planes at least homepages.sover.net/~nichael/nlc-wood/stanref-num.html 1-8 are the bench planes. 1 being shortest of stanleys bench planes and 8 being longest. I find the most useful ones are the numbers 1, 4 1/2, 7, 8, 60 1/2 and 62. I work as a luthier mostly so a lot of difficult figured wood and usually nothing longer that 1500mm.

@HansZarkovPhD

7 жыл бұрын

Birki gts What type of guitars do you build? I have been teaching myself classical\spanish style and I think my end game is going to be to build my own instrument.

@Erowens98

7 жыл бұрын

Scott's Wood I build all kinds of stringed instruments based on what is ordered. But most of my orders are for electric guitars and classical guitars.

@HansZarkovPhD

7 жыл бұрын

Do you have a website or example catalog? I might be interested.Birki gts

@Erowens98

7 жыл бұрын

Scott's Wood Nope, so far i've only taken local orders and have spread through physical ads and word of mouth. In the near future i hope to get a website up, but i don't have one yet.

When my grandparents moved from their home into a retirement home the tools they had were given away and when that was happening i wasn't yet super interested in woodworking so i didn't want the tools at that time. I super regret that now :S

@bighands69

3 жыл бұрын

You maybe able to find out what happened to them and get some of them back.

Thank you for making these videos. I just discovered them while researching how to sharpen my very first hand plane and now I'm hooked on your channel. I'm a novice who now wishes he started woodworking this way 30 years ago. After being frustrated about not having a budget for the high end woodworking equipment, I've decided to try and go old school. I have a lot to learn, so thank you for making these videos!

Paul, you are so great at the woodworking videos! Thank you so much. I really appreciate this particular video. I can't afford nice Lee Neilson planes, or even those cheep one's at Home Depot, but I can afford a $3 plane at the flea market. Please keep them coming! Especially the videos about what tools you use, and how to not only use them specifically, but also how to restore the less expensive used tools! Thanks for all you do!

I have heard that one can use a white vinegar soak to remove rust. Do you have an opinion, Mr. Sellers?

@favazfarook

7 жыл бұрын

yes it works, i has few hammers cleaned that way, by with the plane i guess doing this way it will smooth the surface + remove rust.

@sarsoar

7 жыл бұрын

Alexander D. MacPhail yea before you start where he began at the sanding, give every metal part a vinegar soak and then hit it with some light metal brush. Repeat a couple times to get rid of the bulk of rust.

@linkekatze

7 жыл бұрын

works great. remember only to soak metal in vinegar. for example if you're restoring an old hammer for instance either remove or cover the wooden part. besides that, the longer it will soak, the more rust will come out, but up to a point. the longest for me is 12 hours, depending on the condition. then remove all the dirt with a cloth to see the progress and rub down the rest with either steel wool or a metal brush

@cdouglas1942

7 жыл бұрын

Battery chargers can be used to remove rust but its a little bit of a process. Probably best to start with vinegar, a dilute acid.

@InstantGiblets

7 жыл бұрын

Evapo-Rust or electrolysis for me. I really love the stuff for small iron pieces like this. I think it works better than vinegar. Either way soaking in a rust remover first will limit the amount of metal that needs to be removed.

Absolutely amazing watching someone work at a task who knows where their end goal is and knows what it takes to get there. Beautiful work sir. Thanks for posting