Two vids in 2 days after a month plus of being MIA. missed them! Glad to see you back man.

@ProjectDanH

2 жыл бұрын

Thanks brother! Got a summer full of unedited footage to come.. More on the way!

Nice Video Dan. You have some of the “Best” Jeep Videos I’ve seen!

@ProjectDanH

2 жыл бұрын

Thank you.. Thanks for watching brother!!

@BobCummins

2 жыл бұрын

I have learned a lot from Dan and D&E.

Couple of good little tricks there Dan! They will come in handy in the future! I will be watching for the line removal and installation. Have a great day! 👍 👋 😎

@ProjectDanH

2 жыл бұрын

Coming soon JB! 👍

I have been dreading this job. This video however has lifted some of my doubts. Great vid as always and glad you are back to posting.

@ProjectDanH

2 жыл бұрын

Thanks John, Glad to shine a positive Jeep light 👍

Had the same issue with my dip stick tube. Heating works every time 👍🏻

@ProjectDanH

2 жыл бұрын

Every time!

You are sure having some nice weather up there.

@ProjectDanH

2 жыл бұрын

😂😂😂 Slacking on my up loads!

I like to use the bead-it in the spry can for this it works perfectly and won't leak comes in gray , red, black ect.. Also the filter bolts have a torque spec so next try and include them as well . Great job 👍 Black beauty rides again !! P.s. I spray clear coat on all my lines , trans , brake , fuel ect.. it keeps them looking good and rust free for years to come .

@ProjectDanH

2 жыл бұрын

Excellent tips! Thank you!

Excellent video Dan! In my book, if you can get the bolt out, it's not completely rusted out. LOL TJ wrangler's rust out worse than the cherokee's. And, for those who don't want to loosen the trans pan, just jack up the front and put it on ramps to get the most fluid out.

@ProjectDanH

2 жыл бұрын

Rust is terrible! Great tips!!

That was a dirty job but I new Dan could do it , can’t wait to see part two

@ProjectDanH

2 жыл бұрын

Lol! Part 2 is the dirtiest

Nicely done Brother 👍👍

@ProjectDanH

2 жыл бұрын

More to come!

Nice vid. Love the jokes. 😂😂

@ProjectDanH

2 жыл бұрын

Thanks Man!! Hope you watch em ell!

Dan ,I like very much both videos. well done .thank you very much. wish you were my mechanic.

@ProjectDanH

6 ай бұрын

thank you brother, much appreciated!

Awesome video dude, just did a new filter and new kick-down(tv) cable. Made the mistake of putting the gasket on, but might pull the pan off one more time and use RTV instead like you described. If you run a transmission cooler, check out glow-shift tranny gauge. They even sell a single pod gauge mount for the drivers side pillar. From a fellow long islander, another great video!

@jakesiegfried7152

2 жыл бұрын

This is on a 2000 cherokee sport btw****

@ProjectDanH

2 жыл бұрын

Awesome brother! Thanks!!

@junipertool

Жыл бұрын

I have a 94 xj and I was wondering what’s the benefit of using RTV rather than a gasket?

Great vid! I recommend some good safety glasses though. Protect those baby blues! I learned my lesson after getting an eyeful of rust gunk.

@ProjectDanH

2 жыл бұрын

totally! good eye protection is a must!

Something I bought once and used multiple times, oil pan snap ups. Used on the oil pan and trans pan on my XJ, trans pan on my ZJ, and I think there was something else before they disappeared.

@ProjectDanH

2 жыл бұрын

They came with the oil pan gasket set, but not with the trans set I got

@robertgrauman8602

2 жыл бұрын

@@ProjectDanH They fit the trans pan bolt holes

UFFDA ! My transmission shop service using Amsoil is a $585 estimate. That includes changing the complete gear train. After watching this video I am considering doing it myself. The trans lines to the cooler make me worry though.

@ProjectDanH

2 жыл бұрын

Its completely doable. you got this!

not bad for a yankees fan. Haha thanks for the video.

Id like to see a video on the k suspension viper coil pack mod

@ProjectDanH

2 жыл бұрын

hmmmm

Do you not use a gasket or does the rtv do the trick??

Great video as always. The link to the tools don't work. That swivel had me in sudden need to replace all mine lol.

@ProjectDanH

2 жыл бұрын

Hey Brandon, Sorry about the link. Try to contact Chris Watson at facebook.com/watsonsynthetics/

When a transmission service starts with removing a headlight, I get confused 🤔

@ProjectDanH

Жыл бұрын

Hang in there pal, you'll be ok.

you need a service shop with a lift in doors with some heat and air system

@ProjectDanH

2 жыл бұрын

Yep, Maybe I should start a go Fund me?

@misstransgender

2 жыл бұрын

@@ProjectDanH YOU SHOULD ALL THE OTHER CHANNEL THAT WORK ON STUFF HAVE GARAGE AND STUFF

@ProjectDanH

2 жыл бұрын

@@misstransgender okay!

I have heard conflicting info about changing tranny fluid, that it can blow up a trans due to the metal particles being removed. Have you had any trouble and what do you know about this rumor? Dig the videos man.

@ProjectDanH

2 жыл бұрын

Thanks man, I've heard the same rumor my self. This Jeep runs fine with fresh fluid free of debris. Your trans will appreciate clean fluid.

I am about to start this job. I am a little worried on getting the right size O ring for the dip stick tube. Don't want it to leak after putting it back together. How tight was the top half of the dip stick when putting it back in to the bottom half. Thanks for any info

@ProjectDanH

Жыл бұрын

Pretty tight, you don't want crud to get in a sloppy dipstick tube.

@jeremyhanna3852

11 ай бұрын

For some insurance put a hose clamp on the tube to keep it tight

Chris watson ..is he at victory tools ?

@ProjectDanH

2 жыл бұрын

Independent sales for motiv x tools, fumoto, and amsoil

I can't get the pan out. I don't have the leverage/space to really yank out the whole dipstick tube. I'm going to have to leave the old filter in and just refill the transmission fluid until I can figure out how to get the damn thing off.

@ProjectDanH

Жыл бұрын

oh man, its so annoying. hope you get it one day, god speed!

@Fusterclucked00

Жыл бұрын

@@ProjectDanH Went pyro with it and used a torch. It surprisingly came right off after about 10 minutes of straight heating. Melted my brand new torch in the process but I got it off, cleaned, painted and back on there. Sherman the Tank is running smoothly. Thanks for the directions!

Where in the vin does it designate an xj or a zj on a 1989 jeep Cherokee Laredo

@ProjectDanH

2 жыл бұрын

Vin numbers don't designate between XJ or ZJ. The digit placement however does, have other specific functions. If your jeep is an 89 then its an XJ www.morris4x4center.com/knowledge-center/vin-jeep-cherokee-xj-1984-2001/ www.morris4x4center.com/knowledge-center/vin-grand-cherokee-1993-1998/

I love you in a way that a hetero man can love another over the same issues with their XJ

@ProjectDanH

2 жыл бұрын

😂😂😂 hilarious.. God bless!

My transmission sump plug just spins and won’t undo. Anyone have any solutions?

@ProjectDanH

Жыл бұрын

Grab a new pan

@officialWWM

Жыл бұрын

@@ProjectDanH I was actually able to fix it. I removed the pan, and with a bit of leverage, was able to get the plug out. I retapped the threads in the pan and got a new plug :) I’m in Tasmania, so just getting another pan wasn’t really an option for me. XJs are pretty thin on the ground round here :/

Why don't you use the transmission gasket

@ProjectDanH

2 жыл бұрын

They're flimsy and don't adhere, they also leak. The factory uses RTV too

Lmfao smells like a foot 🤣😂🤣😂🤣😂

@ProjectDanH

2 жыл бұрын

Haha!

Man when are you gonna get yourself a lift?!

@ProjectDanH

2 жыл бұрын

Its in the works!

torque specs homie

@ProjectDanH

Жыл бұрын

not much, prob under 20 ft lbs

@Quesadla

Жыл бұрын

@@ProjectDanH Yea was just curious about the oil filter, And the pan too. Some guy on an old forum said 60 ft lbs, Then up to 80. . Let's just say I have 16 of the 19 pan bolts now. Dug through some shit and found. an old book for my jeep. Pan torque specs is 10 ft lbs, did 7 for the filter.

@Quesadla

Жыл бұрын

@@ProjectDanH Appreciate the videos for real. Really helped me out.

@wickedbeto2732

Жыл бұрын

@@Quesadla sure he didn’t mean inch pounds?