Hey Guys, welcome to the channel! Check out my videos as a guide to maintaining and restoring any Jeep with a 4.0 Liter straight 6 engine... and some without!
Educational, Entertaining, and Encouraging!
Making old Jeeps new ... 24-7 Projects!
- Beach Jeep
2001 Jeep Cherokee XJ mated with a 1999 XJ 2Door creating the world's first 3-row, 2-door XJ.
- Grey Hornet WJ
2003 Grand Cherokee Laredo with a brand new 4.0 engine, an Overland package, and Colombia edition trim.
- Project Wrecked J
A wrecked 2001 Jeep Cherokee limited XJ that was rescued from the salvage yard and restored. Has a 3-inch lift and a rear disc brake conversion.
- Gator XK
2009 Commander Overland 5.7 Hemi w/ QD2
- Blue
1989 Mustang LX 5.0 Convertible.
Previous Projects
- General Grievous ZJ - SOLD (RIP)
1998 Grand Cherokee ZJ
- Green Hornet WJ - DROPPED VALVE, (Parted out)
2002 Grand Cherokee Overland package, 2-inch budget boost.
- Black Beauty (SOLD)
The Cleanest 2000 Jeep Cherokee Limited in NY
Пікірлер
Mine is v8 I think it's 5.9. Does it matter what the engine size is?
Is it the same for the 2001 wj?
Love ya, Dan, but that thing is hideous.
Man you just made me confirm that I’m gonna get one of these. I passed on one years ago and I regretted it every single day since then. Also, 05 had coil springs. 99 to 04 had leaf springs.
Awesome bro!!! I thought All 2wd excursions had coils in the front and leaf springs in the rear. All 4wd excursions had leaf springs on all corners. Who knows. Lol
HEY DAN, YOU DID A GREAT JOB WITH THE " FIX". BUT WHAT YOU DID WAS JUST CLEAN UP THE MESS THE PREVIOUS OWNER OR SOMEONE ELSE MADE! AFTER SAYING HOW DANGEROUS CUTTING A HOLE OR HAVING A CUT OUT FROM ON TOP OF THE GAS TANK IT IS? YOU WENT AHEAD AND JUST MADE A NICER ONE! THAT IS NOT REALLY RIGHT! THE RIGHT THING TO DO WOULD HAVE BEEN TO EITHER REPLACE THAT WHOLE SPACE TIRE PIECE OR AT THE LEAST GET SOME NEW SHEET METAL AND WELD IT NEW PIECE MAKING IT SEAMLESS AND FITTING IT LIKE IT CAME OUT OF THE FACTORY. YOUR HOLE DOES LOOK GOOD! : P BUT ITS STILL JUST A BETTER INSULATED AND LOOKING HOLE. ITS NOT SEALED THE WAY IT SHOULD BE. IF YOU DID WANT A HOLE THERE TO ACCESS THE FUEL PUMP, WHICH I AGREE SHOULD HAVE BEEN MADE THERE TO BEGIN WITH OUT OF THE FACTORY!? IT SHOULD BE DONE LIKE IT WOULD BE DONE IN THE FACTORY. COMPLETELY SAFE, SEALED AND OPERABLE WHEN NEEDED. WHAT YOU DID IS NOT EXACTLY THAT. FUMES CAN STILL ENTER YOUR VEHICLE FROM THE GAS TANK. AND LASTLY, WE ALL NEED TO ACCESS A HOLE AT TIMES! : P LOL........
New subscriber here. I got an 05 6.0 Excursion as well. Lots of mods. Happy to follow along and share knowledge.
Great video! Got a big question hopping you might respond. I put a 99 TJ engine into my 93 XJ, and after about a year i noticed a knocking sound, decided to do a inspection of connecting rod bearings and all where okay, noticed timming chain was very loose, soo i decided to order a cloyes timming chain and new sprockets. when i pulled timming cover off i noticed the timming chain guide was broken into 3 peices, and very hard. well, the new timming kit was missing the chain guide but my father inlaw had a spare one, also kinda old and hard. anyways finished the install and the knocking noise was gone! was very happy, and then a month later it started comming back, and now its very bad on first start up but goes away quickly once its warmed up. my question is, can a timming chain guide on these 4.0L engines cause it to sound like its knocking, if its not there?? It more sounds like a clanking noise. or is the cloyes timming chain stretched over the last couple years lol... and without the guide is rattling against my timming cover?
😎👍
dan on the camshaft bolt is it 50 ft pounds or 80 /on 96 jeep cherokee 4.0
Believe it or not the best way to remove a hub assembly is with an old hatchet with a good wedge on it just tap it right into the seam!!!
Oh man that thing is a beast Great truck man sounds awesome too👍🏾
Lol exactly! That's what we call it the Beast. Haha
The 90s rolled into one song. 🎵😌🎵
Hey Dan! Enjoy your videos as usual. Question for the EVAP. My 2000 Cherokee XJ is running a a P1494 code showing LDP but pricy and rather not spend the money to fix and have the same issue. What is the proper way to test the system or to verify that it truly is the LDP that is malfunctioning and needs a replacement?
If you have the Limited with Quadra-Drive, It is recommended to NOT lift the car up from stock height!
Hey mate firstly your wife is a very pretty lady now I thought my wj was thirsty for fuel it nearly drinks as much as I used to 😂 but your beast is another matter good luck 😅 great to watch your video again😀👍🏆
Yes! Very pretty indeed 🤩. Thank you very much! The beast does pretty well on gas. Not as bad as the hemi! Lol
Hey guys I need your help I have 1996 zj and want to switch old monitor to new but I can not because switch is old What can I do?
wow my door is barely sagging thanks for enlightening me. FIXED
I just got the same pump, it is actually powerful enough to seat the bead on my mountain bikes tubeless tires ( with the valve core removed lol ). The pump is fantastic though!
My dad, had a Surburban. Holds lots of Goose Decoys!
Hahahaha awesome!
Wow....and you thought "Jeep My Life" was bad...Now you're in the diesel world?? Oh Brother Dan,I will be praying for you.😁😁
Thanks Dan! "Ford my life!"
I'm jealous but I think I would have bulletproofed it first. Good luck with it!!!. Yes show some more of the Beast!
Lol.. welp I'm just doin what I can with the money and time I have 👍
Good looking excursion! When are you moving to Alabama….i grew up next to Huntsville!
Maybe a couple years. Wel see!
Alabama cool. Come on down to wetumpka check out the Coosa river adventures and my 98/5.9 Enjoy
Thanks man!!!
Beautiful Excursion. Sounds like you got your 6.0 sorted. Thanks for sharing 👍🏻
Lol.. thank you. Wel see!
Super awesome Dan❣️
Thank you!
Nice rig Dan!👍
Thank you!
So you bought a money put lemon.😮 WJ foreva! 👍
Lmao. Yea .. basically
@@ProjectDanH Great job on it! 👊😎🇺🇲
@@DP-bc3xl thank you!
It is the best truck/SUV ever made! You can tow the world and have room for the entire family and dog lol. Definitely a huge fan of them and wish i had kept mine. Glad to see its studded, deleted, new turbo and running fantastic!
Thank you sir!
Sweet
Thanks!
where is the niner
Storage.. Needs a Transmission =(
@@ProjectDanH manual swap it asap :D
#MYTRUCK
lol =)
I love these 😍
Yes! Thanks for watching
Hey Guys, Hope you enjoy the new addition to the channel... The Beast!
Man I live in Florence Alabama you was 20 min from me. Would love to meet you and your family love the Beast safe travels brother
@@MrBIGDIESE hey brother! Wel be around... Maybe next time! 👍
Just had a look on a 2000 with 100k miles on it. Would you suggest swapping the 0331 even if there were no issues until now? Thanks a lot!
Great! Where did you find that plastic jug with the lid?
Grate video ✌️✌️
cool I'll try it with my W j thanks
Also one of the main reasons the cable damages is grease ,, the other is worn spring or plastic parts
If you can hear the motor with no funny noises like lacking or stuck most likely the plastics cable springs are broken or wore out ,, buying a cable kit if available will be the answer ,or buying the parts separate , junk yard or buying the whole kit new , keeping n fixing the spare or sale it,,
What are you using now since they stopped making MS10838?
They stop making it now
Hello dear Dan, your work is very excellent Question: I have a Sequoia cooler. Will it work with my Jeep Grand Cherokee? V8-4.7L
Shit I just bought a dorman inlet
Ive watched dozens of videos about doing this and have tried 3 dozen times and as of yet ive had no luck!
For me it was easier to just drop the driveshaft because my hands aren’t exactly small. It takes a few extra minutes but gives a whole lot more room to work from underneath to get to the CPS and I don’t need a bunch of extensions on a socket.
Unbelievable that the Shredder was in this movie because I thought he died in the first one. Him & Skeletor are my favorite villains.
This dude is dangerous
Your spot weld cutter link shows an unavailable product - please update
Safety First Skinned Knuckles
I’m late this this party called Project Dan H, but I think a combo junkyard/B&B would be awesome !. And then on day 2 your spousal-unit can trek to Target with us wj ladies. Just saying.