IT506 Sublimate onto Oracal 651 with Laminating Sheet
Тәжірибелік нұсқаулар және стиль
Hi Friends!
In today's video I'm going to show my process of how I create sublimated vinyl stickers with Oracal 651 permanent Vinyl and laminating sheets.
Let me know in the comments what you think ...
Do you have a permanent vinyl that's not mentioned and works well for you?
Do you use a UV Protector sheet over your outdoor stickers?
Products used ...
Oracal 651 vinyl purchased from Happy Crafters.
A-Sub sublimation paper purchased from Amazon.
Printers Jack sublimation ink purchased from Amazon.
This video is not sponsored nor do I receive any affiliation compensation so no links are provided.
Please help support my channel! You can subscribe and ring the bell to be notified when new content has been uploaded.
You can also check us out online! Our website www.inthe506.ca where you can direct order products we offer or our FB page @InThe506
Thanks for supporting small business!
Пікірлер: 73
Thank you so much I have never wait video that explains exactly how this process works.
Wow!! Thank you for finally one that works!! Without the laminate on top like that it always sticks, whether it’s white or clear vinyl so that you I finally was able to make my own thank you stickers with my logo! ♥️♥️♥️
@inthe5067
2 жыл бұрын
Really happy this was able to help you out!!
Thank you so much for sharing.Very detailed!!
Great video! Thanks for sharing your process.
Excellent demonstration, thank you.
@inthe5067
2 жыл бұрын
Glad it was helpful!
Excellent tutorial!!! Thank you very much!!! ❤💙❤💙❤💙❤💙❤
@mikeandloismcdermott9413
2 жыл бұрын
So happy I could help!!
Thank you for sharing! Very informative video
Such a great video
@inthe5067
2 жыл бұрын
Glad you enjoyed it
Thank you for Sharing!! This is the best explanation that I’ve found!!
@inthe5067
2 жыл бұрын
I'm so glad this helped you Shenay!
@LottieLaughs
2 жыл бұрын
@@inthe5067 So I tried making my stickers today for a water bottle . I was sooo nervous. I did 375 for 60 seconds with a heavy 65lb card stock paper covering front and back. They came out great and no bubbles. Thank you so much again for sharing!❤️
@inthe5067
2 жыл бұрын
@Shenay that's FANTASTIC!! I'm so happy this helped you!!
@traceypickens9537
2 жыл бұрын
Thank you. Finally a video that is easy to understand & follow
This is the best video I’ve watched, very clear instructions, Thank You!
@inthe5067
2 жыл бұрын
Glad it was helpful!
I like this vid. Can I do this as a full page and use a laminator?
wonder if we can use mate laminate, I'm not big on glossy things. and it the mate would look good too
Others are sublimating directly on Oracal 651 without laminating sheet. When I tried the laminate on 651 it ended up delaminating
Thank you for the vid. Can you do one with your CRICUT easy press please? That’s all I have. Thanks
I have sub ink but can you use regular ink and laminate on a car decal? I would think you could.
What UV resistant ink do you use? I didn’t know there was such a thing
THANK YOU for this video!!!! Awesome. May I ask what press is that you use?
@inthe5067
2 жыл бұрын
I have a BetterSub heat press :)
@nurseaprn97
Жыл бұрын
What about using the Cricut heat press?? Can it be used
My laminate will peel off after completely cooled. What am I doing wrong?
Can you explain the difference between clear oracle 651 & laminate adhesive. Also. Do it have to be the thermal lamination?. I seen the self adhesive laminate 3mil that say it is heat resistant...can you use that as well?
Hello - I'm having an issue where the lamination sheet easily peels off the vinyl. I've experimented with high and low temps and times. The lamination sheet peels easily off the oracle 651 matte. I'm wondering if it's the type of lamination sheet that I'm using, any suggestions?
@jennifervessey8371
Жыл бұрын
I'm having the same problem! So frustrating!😢
So question....I followed this tutorial step by step. Made 30 stickers and the laminate is rising off of the vinyl. Any idea what might have happened?
When I sub on 651 with laminating sheets sometimes a ripple appears in the paper, the paper is not smooth anymore, any help? Thanks
Just curious what the benefit is of using the laminate as opposed to just sublimating the design onto the vinyl? I've done the sublimation directly on the vinyl and it works well for indoor use as stickers. Does the addition of the laminate make it more durable for use on a car where it will be subject to the elements?
@inthe5067
2 жыл бұрын
It works great for indoor use but stickers are typically used where they get a lot of touch it elements wear and eventually that ink will rub away from the vinyl. The laminate.gives it that polyester substrate that sublimation ink dyes right into and won't fade, rub or wash away.
@dclose07
7 ай бұрын
It will show through to the back of the 651 if you don’t use the laminate. Also, not using the laminate will make the sub paper stick to the 651. You can run it underwater and lightly rub the paper away and leave the printed image behind, but it does sorta crinkle the sticker, but after you dry it, and peel it away from the backing and press it down on your surface it will smooth out.
hi excellent video what thickness laminate are you using prior to halving? regards tony
@inthe5067
2 жыл бұрын
Oh Tony I wish I knew! The pack it came in got wet ... oopsie knocked over a tumbler of water!! ... and had to trash it. I'd guess to say it was probably a standard thickness.
Do you use actual printer paper or parchment paper...i feel the printer paper would burn??
My laminated peels right off my vinyl, what am i doing wrong? I've tried so many temps and times and the laminated peels off the vinyl.
What exactly is the point of the lamenting sheet, since you can sublimate straight onto Oracle 651? I would think if it was to protect the ink from fading or some other form of protection the lamenting sheet would need to be ontop of the image not under it.
@elliemerritt665
Жыл бұрын
That was what I was thinking also! I have seen videos where they sublimate directly into the Oracle and I would think putting the laminate over would protect the image more. My opinion
Whenever you do cut it with your Cricut what settings do you cut on??
@inthe5067
2 жыл бұрын
I cut with the Premium Vinyl setting. I use this setting for 99% if my vinyl cuts and it's never let me down.
at 14 min and 14 seconds in, i seen the laminate pull up easy when you were trying to peel it off the back to show... is that normal? that's my issue and i cold peeled
@inthe5067
2 жыл бұрын
Mine was too hot when I peeled because I wanted to get the video done. I've had some laminate that won't stick and peels away which is super frustrating. I found the Staples brand always sticks so I just stick with that now.
Did you say what laminate you’re using?
What is that clear film between the paper and the O651? Maybe a link? Many Thanks
@patrickmanala5778
Жыл бұрын
laminating paper
Do you use 3ml or 5ml laminating sheets?
@inthe5067
2 жыл бұрын
Hi April! I've used both and they work the same.
why do you think my image is not sticking to the laminate when i pull apart
@inthe5067
2 жыл бұрын
It could be the laminate sheets. I have used several types and found the Staples brand sticks whereas the Amazon brand will peel away.
asub always has alot of ink left over i noticed
i tried your method but the sublimation is peeling off the oracal vinyl. i messed up somewhere :(
@Srj2404
2 жыл бұрын
it did sublimate nice though... colours are vibrant.
@inthe5067
2 жыл бұрын
Did you do a hot or cold peel? The adhesive is going to heat up so before you can peel the transfer it needs to be cold. Let me know how you made out!
@enone5744
2 жыл бұрын
I tried it cold peel and the entire laminate comes off
@inthe5067
2 жыл бұрын
I'm wondering if you had it upside down?
@inthe5067
2 жыл бұрын
@@enone5744 Did you use thermal laminate? Any other type will not stick.
What kind of laminate needs to be used?
@inthe5067
2 жыл бұрын
I found the Staples brand never lets me down whereas other brands can peel.
Are you mirroring your sublimation?
@inthe5067
2 жыл бұрын
Hi! Yes, you should always mirror your sublimation printouts regardless of the application :)
Mine just lifts up off the vinyl 😩 then I have a non sticky laminate piece with sublimation on it 🙃
@lindsaylutz138
Жыл бұрын
The peeling happens to me when I use 651 but it doesn’t happen when I use Cricut permanent white!! Which is unfortunate because I bought a ton of 651. Oh well.
@jennifervessey8371
Жыл бұрын
This is happening to me also, I wasn't sure if it was a Vinyl or Laminate problem.
My sublimation paper was stuck to the laminating sheet, any idea why, I followed your steps exactly
@inthe5067
2 жыл бұрын
Hi Denise! What paper product were you using? Of all the stickers/labels I've created this way I've not had my paper stick to the laminating sheet (Koala and A-Sub used). Did your laminating sheet stick to the Oracal? I'm wondering if it was put in upside down.
you do not need to laminate the 651 to be able to sublimate on it..