Father Phil sure is the man to find the deals. She's looking like a clean machine

2 years ago we had to retire our 1989 Easy Feeder 140. There was nothing left to weld to.

Good luck with her Great video

Great video. Glad you found a suitable replacement diet feeder at the right money… good luck with it. Keep up the good work.

A road brush or sweeper bucket are a gift to have on any farm

Nice touch there with the new feeder. Good luck.☘☘

All the best with the new to you feeder🚜☘🌾🌱🌽🐂👍

Fine machine, many happy years feeding cattle

Best of luck with the new machine arrival to the farm hope it goes well for ye 👍👍👍

Well done with the new feeder,looks in pretty good condition

Lucky to find a decent feeder wagon.

Nice find hope it goes well for the winter for ye

Best of luck with her very clean looking feeder

Great video Phil and good luck with the new feeder 👌

Lovely clean safe feeder. Best of luck with her

Looks like a really good purchase!

Best wishes to the next addition to the machinery family best wishes with all the happy cattle it feeds👍👍🙏🙏 cheers Declan from Galway 👍

Great video Phil. Good luck with feeder. Enjoyed watching 👍🏼

How can one do without Father Phil? He's some head on him and how did you ever manage that yoke home on the low loader, you must have been shattered. It's good to be young with a sharp brain . Well done everyone 👏 Greetings from the aul 74year old hissie from the boglands of OMAGH 😂😅☘☘☘☘💚

Happy filling Phil

Looks like a pretty good upgrade if it does as long as the older one would say you be happy enough

Great stuff Everybody, very very nice, Ye should have a bit of comfort with that, well wear👍🙏

Best of luck with the feeder hope it's a lucky one 🤞

Great video Phil and the very best of luck with the feeder it’s a tidy machine

Best of luck Phil 👍🏻

Nice diet feeder, well ware, good video!!

Nice feeder , we bought a mech fibre 360 with a bale handler 5 years ago and it’s a good feeder it can hold about 8 tonnes but takes a bit of power to drive it

Well wear on the keenan. One bit of advice take off the inspection plates at the back of the feeder underneath the bearings for the feed out auger and on the auger with the paddles. Meal and feed will build up there if the plates are left on and will will eventually feck up the bearing

You lads are a credit

Have to try the old feeder in wiltons skip those Farmer Phil hoodie are handy for bedding the cattle with your open air 2725 Father Phil will come out of it looking like Worzel Gummidge😂

Nice one Phil and Father Phil The old feeder had played her part her race is run

Could use the old feeder wagon as a slurry nurse tank, I see one converted before.

Well wear with the Keenan ye should look into getting the Keenan pace system and clock it’s a fantastic job will improve consistency of diets

nice upgrade

Farmer Phil the Best of luck with it

Good stuff

Deffo gonna want the windows and doors on the 2725 for the straw chopper if it stays on it 😂

Grate video. You should do the 3690 next

Best of luck with the new diet feeder 🚜

The Belgium blue! 😂 jeez guys, I bet your glad the stock are in. Grimm and I mean GRIMM 10 days of weather!

Happy you found a machine at a good deal.

Cracking video as always

@paddy294

8 ай бұрын

How are doing Phil

Hello . Thank ye for to Q & A . It was very entertaining . G'luck !🇮🇪🇫🇮

Congratulations with the new feeder :)

your right, sometime you just have to bite the bullet and say its time to replace. while we like to think we can get anything back up and running sometimes there is just too much work in it. Father Phil could have spent 2 days stuck in it and might have to do to again in a months time. watch out for the pillars :)

would the venieri load the feeder if you had a grab on it .Great video Phil

@FARMERPHIL3690

8 ай бұрын

It would yes

Well ware Phil,best of luck with the new diet feeder 🍀 How are the big bad bulls enjoying the new rubber matts?

@FARMERPHIL3690

8 ай бұрын

Seem to be enjoying it well

@cdemo1186

8 ай бұрын

@@FARMERPHIL3690 that's good to hear. Any difference with them and the bucks beside them?

Well wear, it's a big step up for ye & looks great also

Health to wear Phil

Ya may get a winner job for the the cristal

A long spin up north but worth it.......Haven't seen bro in a while, is he in college..

The diet feeder looks terrible. Hopefully you can solve the problem or get another one to replace it.

Well

Yous may get a nice big grab and put it on the Veniri. Let it do the hard work filling the feeder and let the teleporter do the lighter end of it

Ya can't hide d'money

👍

Good luck with it you’re fairly into the silage pit Would it not have been hander to get it delivered

@georgedoorley5628

8 ай бұрын

could pay 700 or more to get it moved ...........when u have the tractor and trailer why not make use of it ..... drove 60 miles one december morning and yoked to a hedge cutter ........the trip home was way way slower ....was gone for 11 hours in total

@OOpSjm

8 ай бұрын

Just the cost of diesel.

@declanf9184

8 ай бұрын

What about the days work gone

@jjm4794

8 ай бұрын

It’s crazy to me how far you’ll drive tractors over there

@OOpSjm

8 ай бұрын

@@jjm4794 Well, their tractors do 50 to 60KPH for roading.

Where in the north did u buy

Would you not be afraid on the bulls bulling the heifers if there all together

phil dont ever sell that lovely 3075

How have you got on with the Storm ⛈️.Looks very wet .We just love watching our favourite farmers in the world.🌎☮️😞☔️☔️⛈️⛈️⛈️🎃🎃🎃🎃🎃🎃🎃🎃

Hello fp sir

Are horizontal screws better than vertical screws?

@FARMERPHIL3690

8 ай бұрын

The horizontal work well with beet in the ration but can’t really do bales where as a vertical can take bales but mushes beet

Wud u not put the zetor on the blower or diet feeder

@FARMERPHIL3690

8 ай бұрын

We have to get it running 1st

Bee a hahn it sounds like. The transcript thing can't make it out either.

monaghan isnt in the north 😂

Is the old feeder still available?

@OOpSjm

8 ай бұрын

I wouldn't call it a feeder in its current state

@FARMERPHIL3690

8 ай бұрын

It is yes

Will it chop the beet the new diet feeder?

@FARMERPHIL3690

8 ай бұрын

It will but we’ll still use the beet washer chopper

@OOpSjm

8 ай бұрын

Yes, with a good set of knives.

What do you edit your videos on

@FARMERPHIL3690

8 ай бұрын

I movies

How come yous don't use the newer tractor for long trips, is the 99 faster

@FARMERPHIL3690

8 ай бұрын

The 99 is faster and also the 7618 was a rolling grain

😜

Farther Phil would of been a horse trader in earlier life lol

No doors or windows on 2725 still ?

@georgedoorley5628

8 ай бұрын

they are not too easy come by ..........

@ghostrider7688

8 ай бұрын

@@georgedoorley5628he sent them away to be repaired I think

Who owns the mid-digger that was in de video early at de start

@jimmy75256

8 ай бұрын

His cousin I think

@FARMERPHIL3690

8 ай бұрын

It’s my cousins

I no you hill buy if the next trader is a Massy hill be a Massy 8s 325 😂😂😂😂🤣🤣😆

Yard is bad for a tidying

@georgedoorley5628

8 ай бұрын

are you volunteering .............?

@paulineheaney6945

8 ай бұрын

YOU COULD DO IT IN UR SPARE TIME, GIVE YOU SOMETHING TO DO...

🇮🇪🇮🇪🙏🙏👍👍

The yard could do with a run of a scraper

nice feeder lads,health to wear

Hello . Then when the Farmer Phil get's 100000 subscriber's , He must sing The Rattlin' Bog a live to all of us , don't ye think so ? 🪕🎤😆

Well wear with the Keenan ye should look into getting the Keenan pace system and clock it’s a fantastic job will improve consistency of diets.

Well wear with the Keenan ye should look into getting the Keenan pace system and clock it’s a fantastic job will improve consistency of diets.

Well wear with the Keenan ye should look into getting the Keenan pace system and clock it’s a fantastic job will improve consistency of diets

Well wear with the Keenan ye should look into getting the Keenan pace system and clock it’s a fantastic job will improve consistency of diets