it was almost done and then this happened...
Автокөліктер мен көлік құралдары
Today on Aussie Arvos we've got a lot to do on the patrol build. With less then 2 weeks to the Sydney 4x4 show we're putting this car back to together, with brand new suspension, including remote reservoir shocks, bigger springs, bump stops, extended swaybar links and also we are going to try and fit out new wheels and tyres...
#Tyres #Wheels #Suspension
MUSIC CREDIT
------------------------------------
Music by Scott Buckley - released under CC-BY 4.0. www.scottbuckley.com.au
Filaments by Scott Buckley
Music from #InAudio: inaudio.org/
Track Name.
Infraction- I Gotta Fire
Infraction- Go Bounce
Infraction- Strong
Infraction- Warm Hands
Infraction- Comfort
Infraction- Nobody
Sport Rock by Infraction
old Bossa - Twin Musicom
Hip Hop Christmas - Twin Musicom
Hooky with Sloane - Bird Creek
YOU CAN Heavy Rock Guitar Track
Drive by MOKKA
Underground by MOKKA
Shut it Down by MOKKA
Rock The Crowd by MokkaMusic
Retrograde by MokkaMusic
Sport Energetic Rock by MOKKA
Energetic Rock by MOKKA
Meds by MOKKA
Пікірлер: 228
Great episode. No BS, not boring, no over hype. Love it
@AussieArvos
11 ай бұрын
Thanks Tony!
Great Job Fitting Our Blackhawk Bump Stops these are available at all good off-road stores
Build's coming along nicely boys! Looking really good! Super unlucky about the wheels but fingers crossed it gets sorted for you 🤞
@AussieArvos
11 ай бұрын
Thanks catchys! We'll figure something out!
Awesome build. Keep it up and hopefully get the wheels sorted in time. Looking forward to it.
Awesome build 👌 just one little thing, you are better iff painting those wiper arms, on my gq the chrome used to reflect the sun like a mofo
Absolute Devo!!!! Can only imagine the feeling in the guts when you realised they didnt fit
Always test fit wheels before getting tyres fitted! But I guess you've learned that now 😅
@AussieArvos
11 ай бұрын
Lesson learned 😅😅
@AUSBennyb
11 ай бұрын
alright made her back in your prado, captain obvious here
@psmitchell
11 ай бұрын
Well done, Captain obvious.
@bazza2540
11 ай бұрын
you're like those people that watch a funny video then just write the jokes out in the comments
Please get some nice corner indicator lights on the front. Orange ones just look meh. Also very glad you painted it instead of raptor.
It's definitely turning into a Beast✔️✔️. Pity to get it all dirty!!🤣. I noticed in the back ground Nice Deer 🦌 Head.
@AussieArvos
11 ай бұрын
It's getting there!! Cheers :)
You guys do the best stuff on here. Always fun to watch and informative. Really enjoyed the Harry/Fire to Fork ones too..
What a bugger with the wheels. Hopefully it's sorted by now. Keen to know your thoughts on the suspension and if indeed as you've said, you'll actually use the adjustments. Loving these episodes just as much as your travel episodes. You just edit & narrate them so well. Really engaging and entertaining. Great work. 👍
@AussieArvos
11 ай бұрын
Thanks so much Fatman! We will definitely let you know how they go! Really appreciate the support mate, means alot! 🤙
@harrywalker968
11 ай бұрын
@@AussieArvos bit of advice for you young wipper snappers.. TIE THE COILS IN, top & bottom.. dont rely on the shock.. or make limiting straps. for your education,,go find an f100 4x4.. maybe copy the full suspension.. japs never got it right..not even superior suspension.. just expensive sht..
@harrywalker968
11 ай бұрын
@@AussieArvos never any wheel trouble with yank stuff.. all the same from 1940..till 2000. 5 stud,, 8 stud 160.5 then 8 stud 170.. did you specify yr & 4wd.. if so, dont unrim them, ring them, take wheels there,,there problem.. i have a set of steel 16x10. with 160.5 & 170 driiled,, so they fit 3 trucks.. 1 have 4 all up.. 62 f100 4x4 v8, to a s/duty..only jap 4x4 id buy would be a gu, then fix it..proper..method wheels can be run real low pressure.. bought a set of 17 x 9,5. for s/duty, from u.s. $800 delivered..
Got to roll Over and turn tv on, bang Aussie Arvos, just what I needed after a big Saturday night
@AussieArvos
11 ай бұрын
Cheers mate , enjoy! 🤙
What an awesome build, that is going to look the mutts nuts. Thanks for keeping it real and really hope you have a solution soon.
Mint content fellas! Love seeing the production progression! Keep it up 🤙 Damn shame about the wheels but it’s gonna look so mint when you’re done Liam!
@AussieArvos
11 ай бұрын
Thanks Breno! Means alot mate, cheers
🇦🇺 Keep On Trucking 🛻 Luving The Rebuild 👍🏻👍🏻
@AussieArvos
11 ай бұрын
Thanks Rosco!
Good on ya boys! Loving watching the build. Been watching your videos for few years now and your content and production value are constantly getting better and better all while staying authentic and relatable! Keep up the good work. (Good luck with the rims Liam, gotta love that stuff) 😂
Bugger - another great video though!! Looking forward to seeing the finished product 😊
good looking wheels, hope you get em sorted out how you want em. terrific job you are doing on the rebuild.👍
Keep up the positive outlook Well done lads. Cheers
Hell Yeah! 🤘 Good way to kick off the Sundee Morning 👌
Despite the hiccups (all builds have many ) you're doing a fantastic job mate. Keen to see the end result.
I am loving your build! ❤
Great to see the Patrol coming together. Bet it will look awesome when finished, just judging from what it looks like now.
@AussieArvos
11 ай бұрын
Thanks Phillip! Can't wait to show you the end result!
@Philipk65
11 ай бұрын
@@AussieArvos Will definitely be looking forward to it. Pity about your rims not fitting.
Hope it all goes mint for ya next fitting Liam keep up the awesome job fellas 👍
Best of luck with the wheel situation, she'll be right lads. Can't wait to see how the canopy comes out.
This is going to be such an awesome rig well done with the build so far
🤞 you get it sorted 🙏 And yet another great episode 👍🏻
Just the struggle of working on a car, I'm having the same issue this week. Guess we're in the same boat 😅
@AussieArvos
11 ай бұрын
Haha that's it mate, not a great feeling 😅😅
Great video as usual guys. Love how you discussed the 💲 and reasons behind your choices. Those wiper blades are bling. Shame about the wheels, seems you have ordered correct bore, just not bored correctly. Hopefully supplier will come through. Personally I can't wait to see the tray. Great build series
Ha what a bummer! good reason to go back to steelies ;) loving the build, and appreciate the way you guys interact with the camera and don't hype the shite out of everything, but still maintain enthusiasm. you guys and dan are great. refreshing even
@AussieArvos
11 ай бұрын
Thanks jagermonsta! Really appreciate the support!
highs and lows liam - nearly there mate ..
@AussieArvos
11 ай бұрын
Thanks mate :)
You probably got the rim for a Toyota, which has a center bore of 106mm. It's really just 4mm difference on the diameter, 2mm on the wall. I almost feel like machining those 2mm of the wall would not compromise it, but who knows.
You guys better feature this at Melb 4x4 show looks mint!
Bummer, great to see the build vid. Hope you get it sorted in time
@AussieArvos
11 ай бұрын
Thanks big Kev!
Machine the centers out . ive done it before numerous times . just ensure there is still enough wall section. Great choice of tyre as well they will smoke razors in slop you watch
WOW she's looking awesome mate, may as well go all out only live once. . Can't wait to see how she comes up.
@AussieArvos
11 ай бұрын
Thanks Rossco!
Spewing man. It would of been good to see them on the rig. All n all the patrol is coming along nice👌👌
gutted!!! im sure its going to look insane with the new wheels boys!!
Just an unlucky snag, but the whole build is coming along great!
Nice wheels. I’m pretty sure that somewhere in that box it will say to fit the rims to the vehicle before mounting the tyres to them to check fittment
Those rims would fit the 80 perfectly ;)
Liam, I was so looking forward to see what the patrol looked like with the new rims and tyres. Hope you get it sorted mate.
@AussieArvos
11 ай бұрын
Thanks Mike! Hopefully have it all sorted soon! Cheers :)
G003 are a staple for Snow-wheeling in Alberta Canada. Great tire, my safari has them on up here for the snow 🤘🏻
Awesome
Get them thrown in a lathe and increase the centre bore. Not a hard job, only thing is the centre caps won't fit, but you can make 3d printed adapters or use thin alloy pipe adaptors to make them work also with the larger centre bore.
If you carnt get the rims take to a machine shop and get the middle lathed out to the correct size. I have done this before on an old patrol as long as the wheel studs are right it won’t take much to large the centre. Keep up the great work
Thats project cars for ya! Just wondering with your remote res clamps in the rear. I've got Dobinsons MRRs' and i know their instructions say not to clamp in the middle of the body of the res. I'm guessing this is because floating piston and clamping may interfere.. if its not in their fitting instructions, worth asking the question of fulcrum to check. Keep at it fella's not far off now!
the builds looking great, it sucks when parts dont work out but im sure nathan will sort you out
Man, I just learned about this uncommon bore issue today as well! I was ready to bolt on a set of Toyota's, and noticed a slight visual difference...106 vs the required 110.....so it's either to the machine shop, or maybe a router if I feel adventurous tomorrow!
what a shame wheels looked great, cant wait to see finished rig in Sydney. Been awesome watching the build from the start.
@AussieArvos
11 ай бұрын
Thanks Damien! Hope to have it sorted by then! See you there, cheers :)
Had a similar issue on my 06 GU TD42 ute. Got stock steelies powder coated. Needed a die-grind so they'd go back on the hubs. Tyre shop (Bob Jane Kotara NSW) were all over it. Keep up the great work tho lads it's coming together great these hiccups happen from time to time. Cheers
Bugger about the rims. They owe ya a carton for the mixup for sure! Rig is looking sik though.
Yeah, make sure you can still easily access the adjustments on the remote reservoir in any conditions. Last thing you need is having to crawl underneath when wet or muddy etc. Great progress. It's starting to look like a track weapon. Beadlocks are illegal for road use in NSW. So I'm sure a lot of the hardcore 4WDers in NSW are watching this with envy. But it sux that you were sent the incorrect wheels. Hopefully it's been sorted by now. Great episode boys. 👍👍
@AussieArvos
11 ай бұрын
Thanks Hammerrocks , we'll hopefully get it sorted asap!! Cheers :)
@HammerRocks
11 ай бұрын
@@AussieArvos BTW boys, you should consider making a velcro backed patch of your logo. It's what I buy with content creators I follow. I hope you consider it. 🤞
Really keen for the tray ep once i get my new car ill be pulling my gu off the road for a make over and currently looking for inspiration
Nearly at a 100k boys!
@AussieArvos
11 ай бұрын
Getting close now!
Have a look at JW speaker 8700 headlights absolutely Awsome upgrade
You should be able to keep those rims and get the 10mm machined !
Max respect for taking that so well. I would have flown off the handle for something like that to sit me down Best of luck for another set though they do look schmicko
@AussieArvos
11 ай бұрын
Thanks king ninja!
remote res bolt at top be hard to undo with tray on, turn brackets around
You can get them bored out at any tyre shop got mine done at continental Mitcham
Excited for the tire review. Separate video pls.
Looking good
@AussieArvos
11 ай бұрын
Thanks Ashley!
@ashleyduvall1962
11 ай бұрын
@@AussieArvos it will run rings around my Y62 once you get it completed
Bummer bro, the tire rim combo looks badass
@AussieArvos
11 ай бұрын
Thanks Billy, hopefully can get something sorted 🤞
Nice rims to suit a Navara...........
Looking good, hope to catch up with you blokes in Sydney 👍
@AussieArvos
11 ай бұрын
Thanks Scott! See you there! Cheers
Build looking great mate , aussie way to deal with a problem is to have a laugh and move forward, so wheelie shame about the rims but can't wait to see when it's sorted out
@AussieArvos
11 ай бұрын
Thanks Marty! That's it, We'll figure something out !
The builds looking good. Just like new. Rims look tough but how do you get insurance with bead locks? I was looking at getting a set but was told by racv they won’t insure my rig with beadlocks. Can’t wait to see you rip up the tracks with your new rig.
Bugger guys, but what doesn’t kill you makes you stronger 💪
@AussieArvos
11 ай бұрын
Haha that's it , all part of it!
@andrewsoutdoors1802
11 ай бұрын
@@AussieArvos exactly…. It’s like a trip where nothing goes wrong… you never remember them.
Aren't beadlock wheels illegal here in VIC?
@BrentonStammberger
11 ай бұрын
everything is in VIC
Makes me feel better about my 4wd issues
Gonna be a weapon mate, fingers crossed about the wheels, shit happens
@AussieArvos
11 ай бұрын
Thanks James! We'll get there!
Bloodly gutted lads. Good attitude to have though. The build is looking awesome and I'm m sure you'll have it sorted soon.
@AussieArvos
11 ай бұрын
Thanks Brad! We'll work out a solution 🤞 Cheers for the support 🤙
Awesome vid mate, Wheres that power steering cooler from? I need to move/update mine
If the supplier sent you the wrong wheels and is going to stick you with their mistake, a decent machine shop will fix up that centre bore for you.
I had the same problem with my non beadlock walkers and had them machine out with the boys at off-road konnection as alloy wheels are had to find with a big bore
Can you do a price breakdown once your finished
Poor Liam is it, that would suck but at least the looks good
Just need the bores machined. Common practice as the older vehicles like Gu and Gq are larger than the new vehicles they manufacture these wheels to suit
You could send the rims to a machine shop to bore the centre out to the measurement you need
Where are the spring cushion rubbers for the top and bottom of the springs ??
Get yourself some coil retainers so they don’t pop out when wheeling offroad.
get the centre bores opened up on a lathe. carton of beer or two should sort that minor problem out.
took one for the team mate...
That’s wheelie disappointing mate! All jokes aside this rig is looking awesome can’t wait to see it out on the tracks. Cheers Pat
@AussieArvos
11 ай бұрын
Thanks Pat!!
With a set up like this is your old man a engineer? Boiler maker? Mechanic?
Are you going to get it engineered? Build has come along great. Would be a shame to get it defected for 35s and lift. I personally have had nothing but dramas with police in the high country due to lift and tyres.
Shame about the wheels mate. I have the All Terrain Yokohama Geolandar’s on my Prado 150, and they’re epic tyres. I’ll definitely be going the Geo’s again, but maybe the AT-X next time for a bit more aggressive tread.
Bummer on the rims man but keep up the content the Gq coming along mint! 👌🏼
@AussieArvos
11 ай бұрын
Thanks Jake!
Stupid question because it'd remove the ability to rotate tyres but are there front and rear specific rims in that set.
Was it all the wheels that were not bored out correctly? Cause there were still 4 wheels/tyres on the back of the Ute at 17:20.
these issues are common. hope you can get a replacement quickly
I should go to bed but then I saw this recent upload
Get a machine shop to take out the centre to the correct size will cost bigger all
Man. I could feel your pain. It’s all looking awesome. Just a question if anyone knows, are 35’s and a 3” legal in Victoria, and how do you get around fitting them?
@bogged2theeyeballs695
11 ай бұрын
Must be fully inspected, tested and certified by an automotive engineer. You should talk to one BEFORE you start or there is a good chance you will waste your money on parts that don't meet the engineering requirements. This video gives you a good idea of how an automotive engineer goes about the certification and all the work and paperwork involved. This is N.S.W. and while laws vary from state to state, the process of certification is basically the same. kzread.info/dash/bejne/nZ-H1Zqpf6aug5s.html
@ZedF
11 ай бұрын
Vic's a nannie state, far from legal. I'm sure some mobs would engineer it but without it and by the book, no way in hell for any of the above. Beadlocks are a canary on their own
I really hope you used a genuine windscreen seal bro 😭 if you didn’t it will %110 leak. also if any sealant was used it will definitely cause rust and leaks. take it from me, had my windscreen changed 4 times, leaked 3/4 until the 4th when i finally got a genuine seal
The more I think about this, the more I would be interested to see what the retailer says about this. The box clearly states 110.15mm, and if it's not that all the way through the "bore" then it's not as described. All their rims are not as described, misleading, or maybe it was a Friday arvo job and they "forgot" to bore all the way through on yours. Is it only one that is like that or all of them?
I've just purchased a set of ATI hybrids! Picking them up with some new tyres on Friday. What nuts did you use? Tyre shop called saying they didnt provide any. Any idea if factory patrol nuts fit?
Question, did the two blue fulcrum springs look the same height? Is there a driver's side and a passenger side because of a load difference?
i know people machine boar out ve/vf commy wheels to fit earlier models, is that something you could do?
What a fvck around. How many times you hear about how it looks :D Even the heroes in the comments, gonna look mint mate :D :D My favourite though "These wheels are quite unique, there's a couple of others the same on the market" 🤣🤣🤣