I like that you didn't just get another expensive gun. Especially these days people need good opinions on more affordable equipment. Great video. Thanks.

Great review. I enjoy watching all your videos, they are always informative. Keep up the great work

I bought that same brush a few months ago but haven't started painting yet. It gets some great reviews from airbrush guys. That gun is probably worth it just for the extras alone.

I like the product reviews. I always like to see new things demonstrated before I buy them.

Always good content, thank you.

You're welcome. I actually have a lot of success with the airbrush. I have three of them and I keep a different needle and nozzle in each one so that I am always ready. I was talking to them and suggested they speak with you. I figured you were the right guy for this. I did give them one other name. But I knew that you could give an honest clear review of he airbrush. One thing you didn't mention, not only do you get a great value with the airbrush, but if you ever need to replace and needle or a nozzle, it is considerable less money to buy the parts for the Neoeco than the Iwata. I have been painting with Neoeco for over a year now. I actually put my Eclipse in the back up position. I just fell in love with the Mac valve. I have three of them and I keep a different needle and nozzle in each one so that I am always ready. I was talking to them and suggested they speak with you. I figured you were the right guy for this. I did give them one other name. But I can't tell you how wonderful their customer service is. Any question or issue I have had has been handled without question quickly and to my benefit. As to your question about cleaning, I find them much easier to clean than the IWATA Eclipse and I have less dry tip issues with the Neoeco SJ83. I was surprised ot see this because last time I talked with Frank at Neoeco he said he hadn't heard back from you.

I know you've cut back on the lure production videos due to the amount of time and effort involve to publish this type of comment. I'm not much into unboxings, reviews, painting only, fishing, or boat building videos. However, I do watch all your content to support this channel. You do whatever keeps this channel going and growing!

@EngineeredAngler

5 ай бұрын

Thanks so much....the conversion bassboat rebuild video will be out soon.

Thanks for the video...clear a lot of things. Keep teaching us on Lure matters. Regards.

@EngineeredAngler

Ай бұрын

Thanks, will do!

Great review Franco. It looks to be a pretty good backup brush if nothing else. Very affordable.

Glad to see your review great job.. I see Baker builds, it's going to do one as well. I'm sure he will do a good job. But you're always top notch and very detailed.

@EngineeredAngler

5 ай бұрын

Thanks.

good info!

Great information Franko, was thinking about buying an airbrush kit you have certainly given me a lot to think about, great content.

@EngineeredAngler

5 ай бұрын

Glad it was helpful!

Great review looks pretty good airbrush

@EngineeredAngler

5 ай бұрын

It was!

I really enjoy your videos. Have you ever considered writing an illustrated book for lure makers? You could illustrate a bunch of "generic" lure designs and have various methods/tools and materials that wannabe lure makers could reference along with the math to figure desired sink rates, weight placement, material density etc... I would definitely buy a copy of "lure making for dum dums 101".

@EngineeredAngler

5 ай бұрын

I would love to do that but I'll have to have a lot of other things out of the way. But thanks for the vote of confidence.

Franco I have that and what I don't like is paint cup design to me it is harder to clean, the gun does spray good thanks 4 the video!!!!

I just put mine on order thanks for your review. Also everyone makes segmented lures with vertical body and tail fins what if they where horizontal like like whales or dolphins? I bet I got you thinking on that idea.

Could you please do a tutorial on how to build an inline spinner bait for trout?? Like the famous martin

Would say the iwata eclipse hpcs, but when they hell did they jump to $170!? They were only $100 when I bought a few couple years back. Think I paid $170 for harder and Steinbeck’s infinity cr plus, now those are pushing $400. Holy heck!!!

@EngineeredAngler

24 күн бұрын

I know, I'm in shock too!

I enjoy you no frills honest approach to your tool reviews. This airbrush is definitely higher quality than the one I bought initially to play with and learn, but still isn’t going to break the bank. You should make a link in your shop so that you can get a little kick back from the products that you review and like. I still haven’t seen anyone do a “trash” video on a product that turned out to be absolutely garbage… who knows, maybe you can be the first. As always, Love your videos Alan

@EngineeredAngler

5 ай бұрын

I hope I don't have to spend money on a product that's junk... although a video would be a consolation, I guess.

I love the fact that Harbor Freight has assorted O-rings for cheap just in case someone needed any

As long as you're still producing quality lure building content (which is the reason I support your channel), I will concede to your other offsetting content to balance your load. Stand-alone single product reviews aren't really my thing, unless I'm researching something to purchase. However, "Project Farm" does some killer product comparison that I find interesting.

I mentioned "Project Farm" and his comparison videos in my previous comment. That got me to thinking... You could do a comparison video for clear coats. Maybe test for durability and/or discoloration (clearness). I would certainly be interested it the result. Types of resins/epoxies to evaluate would be something like, Devcon, BSI, TrueCoat, KBS, UV, boat resin, tabletop resin, etc. Comparing different brands/types of glue for bonding two pieces of wood together (lure halves). I see folks using Elmer's wood glue, Tight Bond water proof glue, 2-part epoxies, super glue, Gorilla Glue that needs water to active, etc. What forms the best bond? If I recall, you did some testing for twist-eye pull-out using different types of glue. But comparing different types of tool and/or products commonly used in lure making would be interesting content.

Good review.

@EngineeredAngler

5 ай бұрын

Thanks!

I like the product reviews. Another great video. Do you have a link to that valve below your airbrush?

@EngineeredAngler

5 ай бұрын

Yes check the Amazon store.

I have 3-guns connected to my air source for painting. 2 masters, .3 & .5 needles. I also have a nice Iwata set up with a .2 needle. Over the last year I bet I haven’t used the Iwata 10 minutes. My masters are work dogs and do fine for painting baits.

@EngineeredAngler

5 ай бұрын

I'm with you on that.

Great review Franco, nice looking set that. Might have to keep it in mind if I ever need another one. Hey on another topic, would you consider making an OSP Bent Minnow lure? Just stumbled upon it when looking for inspiration and it's kinda cool. Would love to get your take on it and a bit of an idea of the physics side of things from you. Anyway thanks again for another top video 👍

@EngineeredAngler

5 ай бұрын

I will check it out

I love Iwata brushes but I would never buy an Eclipse. Just through down the few bucks extra and get an HP-C Plus.

Yes! For the short video week, I would enjoy seeing reviews. I, also, want to start trying to make lures, and your input on products would be appreciated!

@EngineeredAngler

5 ай бұрын

Noted!

Definitely don’t mind product reviews, appreciate your hard work on these videos

👍👍👍💯👍👍👍

I absolutely hated the one I bought I threw off the wall and used it for a dart .it seemed to be better suited for that then Painting IMHO

@EngineeredAngler

5 ай бұрын

No kidding!....I have bought airbrushes at two for 16 dollars and never had one that didn't work at least well enough to paint. Sorry to hear you got a dud.

Not related to this but UV resin, since I always do a base coat with resin or other clear on my lures before painting, would it be a viable option to dye the resin with base color (white or black)? That would save some time not having to paint with base color and drying it. Could there be any issues with that? Not really worrying about the resin not hardening due to UV light not passing the whole layer since its pretty thin anyways.

@EngineeredAngler

5 ай бұрын

Yes but it should be transparent dye

Happy fishing 🎣 Friday

@EngineeredAngler

5 ай бұрын

Same to you!

Speaking of beginners, does anyone have a suggestion for a safer, cheaper alternative to a belt sander for shaping lures? I'm looking for a way for a kid to be able to shape a lure relatively quickly, with good symmetry but not send the lure (and possibly a fingertip) flying across the basement. Thanks.

@EngineeredAngler

5 ай бұрын

Some wood rasps would be much safer than carving blades.

@Charliemasterbaits

5 ай бұрын

I bought a belt sander so that I could start making lures. So I bought it in preparation. Then to find out, I was using regular sand paper and those 4 sided sanding sponges far more than needing a belt sander. In saying that, I use mostly Basswood for my lures, so it's an easier carve and sand.

Hi Franco... I want to know have you ever apply any of epoxy resin using spray gun..& if you does how you do it....thanks in advance

@EngineeredAngler

5 ай бұрын

Yes. It has to be heavily thinned to spray. I thin it with denatured alcohol about 25% by volume.

@wongsukri

5 ай бұрын

@@EngineeredAngler is there any possiblity to apply it using an airbrush?...any specific airbrush brand or type that you prefer to use to get a fine finish?...can it be done with mixture of uv resin & alcohol...

$26. On ally express

@EngineeredAngler

5 ай бұрын

Nice tip.

Haben Sie eine outside Absaugung bei ihrem Airbrush Arbeitsplatz ?

@EngineeredAngler

5 ай бұрын

Yes I do, that is why I did the voice over when I was painting.

Thanks for the review way too much of a learning curve I'll stick to rattle cans less clean up

BTW it's not a gun, it's a brush.

it's a man, wearing sunglasses, and he's smoking