Hey DJ before you pull it completely apart I think it's the magnets on your stator you need a new stator. That looks like magnet shavings. My RM z250 did the same thing and I replaced the stator and it ran fine I had the same kind of shavings

About time there a video good to see you post again Love the videos bro

The bikes have a decompression that's why the compression is so low on the gage it just to make it easier to kick over.

Them rmz are so clean🔥 the 250s and 450s are so underrated tbh if there where estart then hella people would not be talking shit

Remember to open your throttle completely up when doing a compression test or the air cant reach the cylinder which will give you untrue reading!

Could be your transmission and crank. I just went through it with my rm where I had metal shavings in my oil from the piston and had to do a complete rebuild on it. Best decision is to do a complete rebuild instead of just rebuilding the bottom end.

Watching from Northern Ireland in the UK loving your channel

Hey bro what do you use to shine up the engine bay and stuff??

Big end bearing on the rod always still run when revving cut out on tick over due to more resistance this was the case on my rmz mate

I Bought That Same Compression Tester Yesterday And I Used On My 110 And A 65 I’m Fixing. I Haven’t Tried It On The 85. But For Both It Reads 30 Psi Which Is Low.How Long Have You Had Your Compression Tester?

I've had a few times where I had no rod knock or piston slap and the the connecting rod bearings and crank bearings where just fried

It’s Lit 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Bro

What was the situation? Is there an updated vid?

4 strokes have a decompression lever...you have to do a leak down test. Compression tests can be done on 2 strokes. Also you need to have the throttle wide open when testing compression

@noahnelson5238

Жыл бұрын

Thank you, I was going to say the same thing.

Ive been done buy a four stroke blowing up. I will only ride a 2stroke now. Cheap to fix as i pull the motor out of frame and give it to my mechanic, to cut down on labour costs.

Is the Cr125 build still a plan?

Are you gonna build that cr125 or just get rid of it?

Hard to tell without pulling the cylinder. All will be reviled then but it ain't lookin good right now... Hopefully the head, cylinder, and cases aren't damaged.

That much metal and you were still able to get it to run, I would strongly suspect the transmission. Most likely took the crank out with it.

Can we get update? Was it the crank?

Man I wish I could just go buy a bike like you I have been wanting a 250 for years now but have no money to buy one with

can u buy a rm125

🔥🔥🔥

Good vid

Rm army ✊🏼✊🏼

suzuki rod is gone idk ... ive only had suzuki rods blew up on me usually not big deal just alot of work

Pull the magnetic screen drain plug looks like a 14 mm below shifter

hf compression gauges are way off just fyi

What’s good cuh

Have you ever bought a stolen bike I’m pretty sure lots of ppl do cause a lot of used bikes don’t got title

Like the video but always clean a bike before you start opening things up incase they fall in the motor!

I am new into flipping dirt bikes and was inspired by your videos. What do you think would be a fair price right now to flip a mint 2008 crf250r

@justinparker6540

2 жыл бұрын

$3000

@s.m.fairsoft6908

2 жыл бұрын

@@justinparker6540 thanks

Hey I got a question I have a rm 80 and when it is supposed to hit the power band it Boggs and dies out any idea for help?

@shotgunz1248

2 жыл бұрын

Check the jetting make sure ur running 32-1 4 oz to gallon gas check the power valve it maybe stuck

@mrwaffles2901

2 жыл бұрын

@@shotgunz1248 it is not stuck and its stock jets and i am running 32-1 checked rings piston and cylinder could it be the air screw? or a dirty power valve?

@pararescue82

2 жыл бұрын

Change your spark plug and check or change your reeds. That’s almost always the issue. Best of luck.

OMG

You are buying some risky machines, that rmz wont bring over 5K ever. And to rebuild the whole motor, with less than a $2000 budget, and expect to make money on it ? No way in hell son

@hadleybennett6875

Жыл бұрын

Exactly I’m very confused on what he is trying to do.

I’d keep the 21 and fix and sale this one That new bikes to sweet to sale

Ain't got no gas, uh hu.

RMZ is best

Its probably the coil pack

I know what’s wrong with it. Ain’t got no gas in it.

@supercooldude824

2 жыл бұрын

A yes the ain’t got no gas in it ain’t it ? Oh got gas in it got gas in it do ? No but do I got gas in dat jawn ? Just put gas in’t

@braysonriggen5514

2 жыл бұрын

Wow funny😒

@dawhiteboy71

2 жыл бұрын

That slow yz is funnier

@supercooldude824

2 жыл бұрын

@@dawhiteboy71 nah YZ got no gas in it

5:18 u bought the bike from a rapper ?? u do know who big yavo is right ?😭😭

@motoxvlogs1920

2 жыл бұрын

i don’t think that’s him lol🤣🤣🤣

@Keem0261

2 жыл бұрын

That’s what I’m saying 😂

@Keem0261

2 жыл бұрын

Got to be

Hey bro can you do a raffle please

Did you buy it from a rapper? Look up(big yavo)😂😂

No one rides Suzuki anymore, lol.

Hey bud your videos are not long enough

Dammnnn that sucks

No offense but glad I dodged that bullet. I looked at that bike and decided to stay away.

@DJsGarage

2 жыл бұрын

Hahaha wish I did the same😪

I stay away from Suzuki’s

I like Suzuki but they are very problematic I've been riding over 40yrs now and they have been the biggest pain in my ass bikes I ever had so now I just stay with my yz and kx

First