I love this channel. I’ve learned so much from it

@BalkansWay

2 жыл бұрын

Thank you for the support!

Smart!👍

When I am reconnecting the board & spot welding, one side spot welded fine for me - but when I done a spot weld the other side it sparked, any idea why? I don’t think it joined either

@BalkansWay

2 жыл бұрын

Hmm that’s strange, are you sure you connected the positive and negative to the board ? Because it can short if you switch them ?

भाई आप एक बार SE2020 में SE2022 की बैटरी डाल के वीडियो बनाओ ना भाई एक बार प्लीज़

@BalkansWay

8 күн бұрын

Hey , i can try that as soon as i get SE2020 on my desk as currently i dont have that model

Good afternoon. I encountered such a problem and now I’m thinking about it and want to solve it, please help me with advice. I replaced the battery on the iPhone se 2020 with the transfer of the controller, reset the cycles and capacity on the jsid programmer, but after installation this battery is identified as not native 😢 ios 17.0.1. I tried all sorts of manipulations, but the dash in the volume on the phone does not determine who it belongs to. Thank you

@BalkansWay

9 ай бұрын

Thats an oddly strange issue. If you can try to boot up the iPhone with non genuine battery to trigger the error message, then put back the original one and boot it again .

Hi, very good video, i have some questions, what version of icopy is needed for iphone se 2020 swap battery? In an other video here on youtube i seen that is necessary to install a new connector between the battery and the connector of the motherboard, this new connector is usefull to set the cycle to 0 maybe

@BalkansWay

Жыл бұрын

Hello, im using the JC programmer for this model you just need to transfer the original BMS to the new battery. Via the programmer you can recalibrate the battery and no additional flex is needed

@pepspam3892

Жыл бұрын

@@BalkansWay thanks for the reply, will iCopy v2.2 work?

@BalkansWay

Жыл бұрын

@@pepspam3892 i dont have that model but i think it should do the job

@pepspam3892

Жыл бұрын

​@@BalkansWay thanks, I have bought jcid programmer like your, tomorrow I will do this operation, thanks a lot for the informations

@BalkansWay

Жыл бұрын

@@pepspam3892 no problem, im happy that this helped you . If you got more questions just let me know

hi, can u share the link of ur JCID i have the same problem with SE 2 BAT so i tested on icopy but nothing run good, i search exaclty the same of u please : so many JCID dosen't have SE2 id with iphone 11 and i woud like to be sure

@BalkansWay

Жыл бұрын

Hello my friend , i don’t use iCopy because i feel the JCID is upgradable . If you already have the JCID programmer you can just buy the battery board attachment. Usuals i don’t advertise were to buy or from who but i got my board from Aliexpress as it was easier to get . So please go there I’m sure you will find exactly you need :)

@smartoperator2487

11 ай бұрын

@@BalkansWay i tested with JCID thats work with iphone SE 2020 ! Thank you friend.

Hi. Thank you very much for this video. Could you write down a list of all extra tools that we need to succeed this additional process? Pleas answer this message with it. I’ll really appreciate it

@BalkansWay

3 ай бұрын

I need to do new video on this as iOS 17.4 needs few more steps. Anyway in general for iPhone battery replacements you need : Programmer , spot welder, battery tag flex , the black adhesive to cover the board , battery adhesive and display adhesive to close the iPhone. Now this will include PC to reset the iPhone . Oh and arm yourself with patience

@iamzulhafiz

3 ай бұрын

@@BalkansWayhi please share your video on more steps needed for ios 17.4

@R13159

3 ай бұрын

Yes kindly share the new video

That programmer also has a copy battery data function, can that be used to copy the serial from one BMS to another (OEM batter), thus, removing the warning?

@BalkansWay

Жыл бұрын

Sadly no , without the original BMS the annoying message stays and battery health will be disabled. At least that happened when i tried to just copy the battery data

Do you have the links where i can buy all the products? Thanks for the video

@BalkansWay

8 ай бұрын

I don’t have links , this was some time ago . However everything can be bought from Aliexpress, especially if there is some discount going on .

Any clue why iphone se2020 still reads old battery data after programming. JCID V1s reads 100% and original battery, but when i connect it to iphone it still reads old data.

@BalkansWay

Жыл бұрын

Important step is to place other battery to trigger the non genuine message.this way the phone will “forget” how much the battery capacity was .

@stankotomasic9867

Жыл бұрын

@@BalkansWay Yes, same as when programming higher models 👍. It is a bit strange that you have to install small flat cable into higher models and this one not.

@BalkansWay

Жыл бұрын

@@stankotomasic9867 well yeah its strange but I prefer not to need any additional tools to change a battery . All this is pointlessly confusing already.

@user-yh7gn2lc1z

2 ай бұрын

@@BalkansWay you skipped that step in the video

@BalkansWay

2 ай бұрын

@@user-yh7gn2lc1z well i did and i didn’t. The phone had already non genuine battery installed

Would the phone work normal if the battery was installed without the original BMS, or does it affect the phone?

@BalkansWay

Жыл бұрын

Hello , the phone will work normally however the battery health will bi disabled and there will be “important battery message” in the menu

@jerryx2000

8 ай бұрын

Can I leave the display attached and remove the Battery?

@BalkansWay

8 ай бұрын

@jerryx2000 sure you can , but by removing it you have more room to work on and avoid damaging the fragile cables of the screen

@jerryx2000

8 ай бұрын

and would you recommend to heat up the display before or not? @@BalkansWay

Can I replace the iPhone SE 2020 battery using an iPhone SE 2022 battery?

@BalkansWay

9 ай бұрын

I haven’t had the chance to open SE 2022 , but i think the battery will fit the SE 2020 ( important battery message will appear 100%) but I’m sure you can’t use SE 2020 battery in SE 2022

Will it show same battery serial number after doing this process in 3u tools?

@BalkansWay

8 ай бұрын

Yep , it’s basically the original electronic from the battery so everything will show up as the original.

@phanisatyasai9983

8 ай бұрын

So with the change in BMS....the after market batteries will be shown with the same original serial number just as the original battery?

hi, do you need the tag on for iPhone SE 2020?

@BalkansWay

4 ай бұрын

Tag is not needed for SE2 , you can directly program / reset the cycles and battery health

Can you give a link for the battery board? I have a JC V1SE but I need to get the battery board for the SE 2 battery. I keep seeing two different boards. Are there different boards? Thanks for the video.

@BalkansWay

Жыл бұрын

Thank you for your comment and liking the video. The board i have is for models 6-12 and i got it from Aliexpress for 17.5 USD , maybe you see two versions as there should be newer version for the 13 and 14 models . Just look it up on Aliexpress, I’m sure you can find it there . If you still cant find it hit me up with mail and ill provide you with link .

@bigtreeproductions

Жыл бұрын

Does the SE 2 battery connector fit the 11 connector on the board?

@BalkansWay

Жыл бұрын

@@bigtreeproductions yes they share one connector on the JC programmer board

does se 2020 not need a tag on to be rescheduled?

@BalkansWay

Жыл бұрын

No , Se2 battery can be reprogrammed without tag on flex.

@user-bc1vn6sm6i

Жыл бұрын

@@BalkansWay with qianli icopy 2.2?

@BalkansWay

Жыл бұрын

@@user-bc1vn6sm6i dont know about this programmer as i do not have it to test. Currently im using JC V1SE

Do I need tag on flex for newer models or does this method work for example iPhone 12 Pro?

@BalkansWay

8 ай бұрын

From iPhone 11 and up you will need the battery tag flex . The good part is that they are re-usable, you just need to boot the phone once with the flex still attached

@Talmiior

2 ай бұрын

@@BalkansWay this is not in fact true, eventually it does reset. The tag-on flex is not reuseable. You do in fact need to leave the tag on flex installed, connected to the battery.

@BalkansWay

2 ай бұрын

@@Talmiior you are very wrong my friend battery health wont fix itself , whit what i have and all the batteries i have replaced if i had to leave the tags in the phone i would be broke by now.

@Talmiior

2 ай бұрын

@@BalkansWay I have read it from official sources, and have seen youtube videos that have shown it switch back on them afterwards. You NEED to leave the tag-on flex connected to the battery inside the phone. Unless of course there is some new tag-on flex that has changed that. What brand are you using?

@BalkansWay

2 ай бұрын

@@Talmiior ive been doing this for quite awhile, and i never left the tag inside the phone after the first boot . You might be reading on a wrong place - tags are not cheap and if not reused they make no sense. Check up some big youtube channels and see yourself - im using JC and Qianli . Even if that dont convince you , do what works for you .

When i replace the battery on the 2016 version, i dont have this problem ? With bms.

@BalkansWay

Жыл бұрын

Well the older iPhone models didn’t had this problem . Apple made the battery replacement harder for models XR and above

@martinsk8088

Жыл бұрын

@@BalkansWay thanks, I thought it depends on the ios version.

@BalkansWay

Жыл бұрын

@@martinsk8088 no problem , it had nothing to do with the IOS version just apple doesn’t like we fixing our devices for cheap

@martinsk8088

Жыл бұрын

@@BalkansWay ok, thanks

@martinsk8088

Жыл бұрын

I replace the battery but i cant turn on phone, someone write in comment that i must clean contacts on motherboard, what you think about it ?

Can i restore iTunes to reset battery data instead of Jcid?

@BalkansWay

2 жыл бұрын

Well i don’t think that will work , resetting the battery information requires programmer as far as i know .

@BalkansWay

Жыл бұрын

@@kaytee7607 i don’t think so

when i plug it into the v1se box it can't fix its battery %

@BalkansWay

Жыл бұрын

Well if you are using the original BMS attach it to the programmer and click the power button new option should be listed.

same battery from iphone 6?

@BalkansWay

7 ай бұрын

They may look similar in the video , however they have different connectors and the battery itself is different dimensions

saang online shop po pwedeng bumili ng orginal na iphone battery

@BalkansWay

Жыл бұрын

If you are looking for original battery only Apple can sell you original battery. Usually you can buy aftermarket battery and as shown in my video you can use the bms board

Se 2020 это тот же 11 разе щлейфа jc не надо ?😊

@BalkansWay

20 күн бұрын

It’s the same connector on the programmator i use and no additional flex is needed to modify the health .

bttry tag??

@BalkansWay

Жыл бұрын

Battery Repair Flex (Tag-On) that allows the battery health to be restored on the newer models after replacing the battery.

i replaced my battery and I have the msg and touch ID not working anymore.

@BalkansWay

Жыл бұрын

Did you move the BMS of the old battery to the new ? Also the screen has two cables that can be damaged when opening maybe thats why you don’t have touch ID . Usually all this is not easy as it seems it just takes more patience

Price

@BalkansWay

Жыл бұрын

What price are you asking for ?

@manuelrivera6778

Жыл бұрын

@@BalkansWay maybe the overall price of everything, materials plus work time and skills included. Maybe the person asking wants to know if this is worth the effort or just buy another phone.

@BalkansWay

Жыл бұрын

@@manuelrivera6778 well if someone wants to start all this is pricey. Programmer + spot welder is like 120-140 USD , the new battery is 16-18 usd . If needed i can make video about all this . Just let me know

Where are you from ? Can you repair my phone?

@BalkansWay

Жыл бұрын

Hello my friend , i’m from Bulgaria and I don’t know if i can repair your device - depends what is broken ? Also currently I’m not doing international shipping , i would love to help in anyway i can . You can contact me via mail / facebook just check my about section.

Can I replace the iPhone SE 2020 battery using an iPhone 8 battery?

@BalkansWay

2 жыл бұрын

The batteries might look the same but the battery connector is different.

@tayade39

3 ай бұрын

Yes

@AmirRas

3 ай бұрын

​@@BalkansWayno it isn't, an iPhone 8 battery can be used with a SE 2020