First try and followed every step and it worked out perfectly

If you have A case that has a hard plastic inside shell you can place that down instead of the guide he shows it worked pretty well for me. But for mine I had to start with the bottom first so that there would be enough room for the camera protector or camera privacy cover at the top, only needed about a millimeter extra up there. Thanks for the great tutorial.

Thanks for the tutorial worked perfectly

Amazing, i try to do it and is not as easy as it seems. Needs lot of practice if you fail at first time the shield not good at all...

I've tried a couple from walmart and tjmaxx and they refuse to stick around the edges. Definitely gonna try this one!

It is easy to use and the video is very descriptive. Good product.

It's all fun and games until try to put on the screen protector. 🙄 thanks for this video!

@hamSAH713

3 жыл бұрын

the aligner is very important

You have been very helpful!!!

Yay it worked but I didn’t put the phone case all the way down it’s a little up by like the smallest thing in the world But thank you this helped

I was wondering what the case thing was for and now I know

thanks, needed to check!

@muhammadkaifhaseebtaiba3742

3 жыл бұрын

Did hed

I was struggling before this video. Smooth as buttuh lol thank you

The perfect thing ever 👌🏻👍🏻🌹

I never do it right :( Thanks for video

What do you use to clean the screen?

I found this channel by searching how to put screen protector on and I was like "Why does he sound so much like PTR?" and I go check channels and I'm like "Ohhhh"

Will it still work with my case already on?

It’s amazing I did it without bubbles yeeee , so happy 😀 thank you so much

like your channel keep it up

@iltivasia6053

3 жыл бұрын

Ru c

Does the little exposed notche on the screen protector butter anyone too

The link for Amazon goes to bunch of different screen protectors - could you tell us the name of the one you use. Also - I just got a 12pro max and love the look and feel of it, and hate cases - do you have recommendation for a screen protector for the back of the phone?

@Jfrosty09

3 жыл бұрын

The name of the brand he uses sucks, it’s a cheap offbrand. Buy ZAGG invisible shield. It’s the best brand in the world

@rubywoo8578

2 жыл бұрын

Tocol brand is very good.

The screen protector did not come with a cloth as told about in the video

How to clean the sticky side of the screen protector

Thank you so much I really needed this 😅

It has Ceramic Shield so it probably won’t Crack easily

I have the same but after 2 weeks my tempered glass start to have air inside on the left side. This happens 4 time so far dunno why I put them as the manual said.

@Jfrosty09

3 жыл бұрын

Again he is using a very cheap brand. You need to buy zagg invisible shield. Goddamnit I’m about to start my own KZread channel on this shit I’m sick of all these amateurs

@notzyroh

3 жыл бұрын

@@Jfrosty09 💀💀💀

It would be helpful to say which screen protector. Link brings you to multiple ones 😕

@Jfrosty09

3 жыл бұрын

Yeah he’s not really an expert, you need (Zagg invisible shield) that is the best screen protector on the market and it comes with lifetime warranty.

Best clear tutorial for screen protector out there. You are brilliant!!!

Hello

This vedio is so satisfying 😍🙂

Don’t you just hate when you just cleaned the dust and then put the screen protector and then you see dust😤

@Jfrosty09

3 жыл бұрын

Look at my comment and I will teach you how to do it properly

Hi. What is the name brand did you install? Thanks i

@FuriousTechnology

2 жыл бұрын

Link in description

@JBReyes777

2 жыл бұрын

@@FuriousTechnology Thanks for your reply, but I was asking what specific name brand YOU used on the video? That's what I would like to purchase. The link showed many manufacturers and style. Thanks!

no matter how expensive the tempered glass is in the end edges are gonna chip anyway. In tempered glass the sides are covered with a black layer which hides part of the screen. whereas with installed screen protectors there's no such problem. I've been using Gadgetshieldz screen protector for few months, i didn't encounter any peeling on the edges or yellowing of the skin.

The redmi phone behind be like: *Bhai bezzati kyun kara rahe ho..😂😂

I installed mine though I later saw a tiny particle in the middle, when I was halfway thru with installing the screen protector, I couldn't remove it because I was holding the screen protector, so I just stuck it as it is, I was so annoyed 😒.

@Jfrosty09

3 жыл бұрын

Hey!

@Jfrosty09

3 жыл бұрын

So I have your solution. You need to get scotch tape, The regular kind. Tap your finger on the piece of dust under the screen protector enough so that when you pull it up it will stick to the screen protector and not the phone. Pull out enough of the tape so that it is clean, no dust. You must use your fingernails to pull up the corner of the screen protector closest to the piece of dust, don’t just pull it off, gently pull up the corner and the rest of the screen protector will stay on. While you are doing this have a long enough piece of tape on your finger to get to the dust, it must be upside down so the sticky part of the tape will touch the piece of dust stuck to the screen protector. Keep in mind you have to keep the screen protector just pulled up , it’s not off the phone entirely, you are using your nail to pull it up just enough to slide the tape in, that way no more dust will get in. When you slide the tape in (MAKE SURE ITS A FRESH PIECE OF TAPE) put the screen protector down on the phone and tap your finger on the place where the dust is so the sticky side of the tape grabs it, lift up the screen protector just a little bit and pull the tape away. Put the screen protector down. And it should form the phone again with no dust! You just use a little scotch tape and grab the dust away. It works.

@Jfrosty09

3 жыл бұрын

I’m actually going to create my own channel on how to properly put on screen protectors. Because if I’m being honest this guy is an amateur. I actually work for Tmobile. I put on five screen protectors every day.

@Snigeln

2 жыл бұрын

@@Jfrosty09 Where is your channel buddy

What’s the screen protector called??

@Jfrosty09

3 жыл бұрын

It’s called something cheap from Amazon. Buy Zagg invisible shield Because this idiot doesn’t know what he’s doing

@ericr7611

3 жыл бұрын

@@Jfrosty09 Zagg is overpriced garbage

Your link just pulls up a bunch of protectors. No particular brand

@Jfrosty09

3 жыл бұрын

He uses a cheap brand. Buy Zagg, invisible shield.

@noaht124

3 жыл бұрын

@@Jfrosty09 that’s what I do. And an otter box symmetry case with a popsocket 😂. I’ve had the same setup fir line 5 years

@Jfrosty09

3 жыл бұрын

I am seriously considering starting my own KZread channel. I work for T-Mobile, I put on 5 screen protectors every single day, and I have not seen a single Person on KZread put on a screen protector properly

@noaht124

3 жыл бұрын

@@Jfrosty09 like it’s not that difficult IDK why people struggle so hard 😂

@noaht124

3 жыл бұрын

@@Jfrosty09 you should start a channel!

Reminder JESUS CHRIST loves you

@C.L.190

21 күн бұрын

Even if you don't believe in him

1 view 1 comments

See Revelation 14:12 & 18:23,Quit PCR test Please see these verses

Stop by your phone carrier and they will put it on for you.

Wrong do not shut it off, keep the screen black until you put the protector on. No need for the amateur alignment thing....use the wipe to remove smudges.... because this guy didn’t...again don’t use the alignment thing. Use the dust sticker after wiping off the phone, right after hit the power button and use your eyes to line the screen protector perfectly to the screen. And let it form. Again you must use the dust sticker and immediately put the protector on afterwards, I would take the film off while you’re still removing dust and set it on the second after you’re done with the sticker, keep it close to the screen so there is no time for dust to settle. oh btw hi 👋🏻 I work for T-Mobile. You did good btw, probably the best demonstration I’ve seen on KZread, but you can’t let the phone sit at all after the dust sticker...

@schojdfjf6495

3 жыл бұрын

What’s wrong with using the alignment tool lmao 😂 there’s nothing wrong with using one because not all of us work for a phone company and have to regularly apply protectors

This is how a phone screen should be, flat!!!

Did he said water proof? No dear it’s not it’s water resistant.

I have not iphone but i am watching this

I do not recommend this screen protector. It is dark in color, not clear, so it negatively effects picture quality. The protector in this video is clear, the one I got is not and I clicked on the link and purchased it that way through Amazon.

are you going to tell us which screen protector is it? lol

@Jfrosty09

3 жыл бұрын

It’s not Zagg invisible shield or GoTo, it’s some off brand that he probably got from Amazon. If you really want a good screen protector you need to buy ZAGG.

Surprise to see screen protector still has got that ugly notch cut out while majority of the screen protector is already full screen without that crap notch.