How To: Perfect Installation iPhone 11 Pro Max or XS Max Tempered Glass Screen Protector by RinoGear
Тәжірибелік нұсқаулар және стиль
How to install a tempered glass screen protector perfectly on an iPhone 11 Pro Max / XS Max. The same method using the guide stickers can be used on iPhone 11, 11 Pro, XS, XR, etc. This technique is also sometimes called the "hinge method." Hope it helps!
💎 Watch the 1-minute Short version for iPhone 14: tinyurl.com/yckc9f3n
🔴 Get the screen protector here: tinyurl.com/2p8zm6kh
Пікірлер: 259
THANK YOU, YOU MADE A OLD MAN HAPPY, I DIDN'T HAVE TO CALL MY NEPHEW. I LOVE THESE NEW TOYS, BUT ALL I CAN DO IS TURN THEM ON AND OFF. THANKS AGAIN,🌴
WOW. By far the BEST vid out there to do this. I was nervous to do this but mine turned out better than I could have expected. I have the XR but your demo was all the same. If you don't have an extra guide sticker, fold up some scotch tape and use it in place for the guide sticker on the right side (to lift up the protector). I also used a flashlight to look at the screen... Glad I did because you don't always see everything in plain light.
Finally a proper explanation on how to use the guide stickers. Thank you very much.
@reallyseriously7020
Жыл бұрын
Ive seen many vids where they do the guide stickers wrong.
Yessss 😃 Thank you very much. I was struggling with this and I messed up twice before this amazing tutorial instructions. I just putted the screen protector on my iPhone 8 Plus and perfectly 👍
Just want to say a big thank you. This is the best video I've seen so far on using stickers to place a screen protector on a phone. I did it your way and it came out perfect thank you.
Omg so i never knew how to use the guide stickers and I got the iPhone pro max and I could never put it on without air bubbles. This video helped so much. Thank you!
This video was a great help to me. I was able to put my screen protector on all by myself watching this. It came out perfect just like in the video.
Finally a video that explains what the stickers are for, thank you! It is a very good idea to put the third on the other side to lever, it avoids fingerprints under protection.
Oh my god! I followed your tutorial and I was able to properly to put my screen protector on! No bubblesss ❤️❤️❤️ love you!😆
The BEST tutorial I have watched for applying a glass screen protector. For the first time in years I have managed to apply a protector with NO bubbles whatsoever. Mine went on exactly as per this video with the large air bubble just disappearing to the top of the phone's screen on it's own. Brilliant. Many thanks.
Though this video is 4 years old, it's still easy to follow and ON TARGET. The brand I used had an installation video, the same wipes, and a sticky label to remove those tiny particles. (Look at it after using it. I was surprised at how many tiny specks it lifted!) Their video, however, didn't show me what to do with the guide labels. After watching it twice, I realized that instructions for them weren't going to magically appear. 😅 Fortunately, this video was just below. My hands are very trembley, and knowing how to use the guide saved me $10 to pay someone else. Thank you! I now have a new skill.
Everytime I buy a new phone I always come back to this video for guidance thanks so much
FINALLY!! a video that ACTUALLY shows how to use the guide stickers! haha THANK YOU!
@panoramas8927
2 жыл бұрын
Well said
@edinsonaldana4240
2 жыл бұрын
A
@jhuncabanting5220
2 жыл бұрын
I fell you bro.. hahaha
@balasubramanian2188
2 жыл бұрын
Yep ...indeed a great piece of instruction
@balasubramanian2188
2 жыл бұрын
Wipes 1 and two are usually used to clean the surface of the screen. Here it is used for cleaning the protector.
Thanks for being the ONLY video (at least the only vid that I found) to explain the "Guide Stickers". I subscribed just for that.
The best tutorial on placing the tempered glass protector by far… Thank You
My whole life I’ve never knew what to do with those stickers that came in the box, now I do. Thank you!
@tsscorp
4 жыл бұрын
My life too. F*cked it up yesterday making a screen full of bubbles. Now I'm looking how to replace the protector with a new one. lol
@jlopez1470
4 жыл бұрын
tsscorp I feel you man
@strawberryrhubarbpie
4 жыл бұрын
J Lopez exactly why I’m here as well lol
@mariep.3349
4 жыл бұрын
Amen to that , thank you
@kellabella83
4 жыл бұрын
Does anyone know what type of stickers I could buy from the store that would work like the ones in this video? I just ordered tempered glass protectors for my new iPad but they didn’t come with guide stickers. I’d feel more comfortable using them.
Thank You So Much For Talking During This. I Found So Many Videos Where They Wouldn't Talk Thru It & Explain Everything. Your Video Was Extremely Helpful & Now My Phone Is Protected (Hopefully LOL). Thanks Again 😊
You're a genius! Thanks! I couldn't fathom what the stickers were for! 👏👏👏👏
I have a pixel and this worked for me too. Also this video was 100x more helpful than the video the actual company made. So thank you very much. 👍
Thank you I watched your video a couple days ago for help putting on my iPhone 11 Pro Max. Plus the guided stickers for lifting the glass helped was a great tip... Cheers! 😁👍🏼📱
Thank you - what a difference using guide stickers make.
THANK YOU. I was working to remove bubbles while plastic case was in place. watching you 'poked me' to remove the case
Just want to thank you so much I have try this trick and it’s work so well
Thank you. This was very satisfying to watch and the results were also.
Great now I know what the stickers are for. Thanks a lot
I just finished putting mine on. Great video! Thanks!
Awesome. Thank you!. Wonder how to protect the cam lenses
Perfect! Hassle free & quick I can't believe it. I didn't even get one single air bubble or one speck of dust! I am totally amazed. Thought for sure it was going to be a nightmare and it wasn't! Thanks for the video!
This is such a great tutorial. I got the Ailun brand screen protector, but the contents of the package (including the guide stickers) are pretty much identical (mine came with a camera lens protector, though, which I do like). The angle made it really easy to understand how it works since you can see the protector start to adhere if you leave it in place for a sec. I did have a couple of modifications that I think worked well for me. First, I put the phone on a slightly elevated surface (I used my 2-inch cutting board) to make it easier to fold the guide stickers around the edge without picking up the phone. Just ever so slightly let the edge you're putting the guide stickers on hang over the edge. It just gives you a little room to fold the stickers over without having to pick it up. Second, I carefully set the dusting sticker aside when I was finished with it, then used it as the third sticker in place of an extra guide sticker (the one in the middle you use to open it without touching the sticky side of the protector). I did that because mine came with two sets of protectors (one each of the screen protector and the lens protector) and just enough guide stickers to put both on if I needed to change it or use it on another phone.
@crazylulu7356
2 жыл бұрын
…..
Always love watching your videos, very informative. Keep putting up these great videos.Thanks.
Thank you! Ik worked like a dream
Now I know how to use the stickers. Thank you.
Yes, if only the screen manufacturers had provided guidance like this, it would have been great! Thank you!
Tested, worked perfectly! Thank you!
You're a life saver, I didn't know what all the stickers were for...
@alanberwick8016
2 жыл бұрын
0
Thanks bro now I finally know what is the use of that stickers😀😊.
Proper explanation. Thanksssss. I am in my 60. This is the best tutorial.
Guide stickers really made this installation so easy,thanks.
Thanks for sharing. Now, I have an idea. Thank you so much...
You just simply well explained it. Thanks man🙏
Spot on, thanks so very much appreciated you made it easy simple, followed your instructions and it works !!!
Perfect. Excellent, simple explanation.
I used these same steps for my iPhone 12 thank you!!
Great tutorial & worked like a. Charm
DUDE!! OMG !! Will definitely do this. Good thing my screen protector hasn’t arrived yet
Video was very helpful. Thank you!
This is the best tutorial I have found on KZread. Thank you very much. Too bad I didn't find it sooner, because I've spoiled a Tempered Glass Screen Protector.
@hamajangz9586
2 жыл бұрын
i messed up both protectors that came with my phone case. i wish i found this video before i destroyed them. now i have to get new ones which is np because they're pretty cheap on amazon
Thanks! Good explanation and perfect line up with my phone. I was nervous to attempt this, but did it! No bubbles, dust or hair!!
I applied one to my Android without all the stickers but I'll keep this in mind for the future. Thanks. 😊👍
This video helps me alot
Very nicely done thank you much.....!
Great tutorial! Thank you 😊
1:18 am I the only one that saw that sarcastic little piece of dust fall onto the screen right after he got done using the dust sticker?😂
So helpful. I learned a lot. Thank you.
Thank you so much omg I'm such a perfectionist when I need my glass screen protector done so I always do it by a professional but I just did it by myself and it came out perfect!
You should use the dust removal sticker immediately before placing the protector down. Also, you should not touch the circle part of the dust sticker, only the handle. Otherwise skin cells and oils from your finger contaminate the sticker. Otherwise great job.
@petercabacanjr3388
Жыл бұрын
Nnmbnbk bmkkn,kmkknnbmb😂😂😂😂😅😅😅😅😅😅😅😂😅😅🧐😅😅😅😅😅😅🥰🥰🥰🥰🥰🤣😆😂😂😅😅😅😂😅😅 n n ,n, n, n n,n , n m , m n !,
@nodm5815
Жыл бұрын
-
Thanks it helped me a lot
Thank you. I learned a lot.
Thank you, a very good explanation - it worked :)
Very useful, thank you!
Very nice work ,thanks too
Beautiful job. Great video! Will work for any phone. Not just iphone.
Thanks a lot Nice video❤
thanks. great video!
Extremely Helpful THANX
It is much, much easier to apply the guide stickers with the phone over hanging the edge of a large hardcover book or a desk. This way you have access to both sides of the front/back of the smartphone.
thanks it helped me a lot! :)
Great video! I just installed mine today. Unfortunately I didn’t see this video in time before hand lol. At least I know how to use the guide stickers properly now for the future.
Very good video, wish I had of viewed this before I installed my protector
Perfect fixing to guide. Good 👍
Thanks!
Top tip my friend thank you so much.
Thanks for this tip, it's very usefull!
Im so stupid.. I had NO idea what the Guide stickers were for... the directions DON'T even mention they are there in the kit, or what to do with them.
thankyou so much
Thank you :)
To the point Great Tutorial
Thank you very much for your cool guid, really I learned the right way.
Not all heroes wear capes. This finally allowed me to install one of these correctly...
Thank you bro
I replaced the battery of my iPhone today. So I need the protector had to be put it again. I've been stressed out by problems with align on the corner or bubbling every time. However, after watching this video, I was able to attach the protector flawlessly. This is really a good example of how well humans can use tools.
@kovanalshaker1458
11 ай бұрын
Hello, I'd like to ask you. Is it worth it replacing the battery?
@Johnnygga
10 ай бұрын
@@kovanalshaker1458it’s always worth it if you’re going to keep the phone for at least 1-2 years more to get max juice and battery life out of it.
this really works like tysm
Very helpful....👍
Thanks for the guide! it was really helpfull! Hi from Mexico
@9019dd
2 жыл бұрын
Hola. Yo estoy aprendiendo espanol. Tu eres muy bonita.
Thanks, very helpful🫶
Brilliant idea 👏
I don't like tempered glass I'm still old school and I prefer plastic film. The problem was dust and adjustment. Finally over almost 12 years of failure your video allow me to install the film with no bubbles and no dust. Thank you sir. Plus I really like the tech armor films, they have quality.
@ripntearprxductixn4872
4 жыл бұрын
Rodrigo Lozoya thing is with plastic is that it doesn’t protect the screen from cracks only minor scratches
I just ripped the back off and slapped it on mine, and it went on perfectly with no dust.
useful information, Thank you....
Thankyou soo muchhh
U r the best..
Thanks from Spain
Thanks
will try again thanks to you. after three installations, still have one or two speck of dust under and I really don't know why. Came to the conclusion, I just can't do it correctly. Shaky hands or maybe my house is too dirty...Don't know. Am I the only one in that situation?
Using Samsung but it still is a great tutorial for any phone. Thanks!
Very well instruction
very nice ,thanks
Beautiful
Thank you!!!!! 👍😊
thanks