Everything from the cleanliness of your workspace, down to the details. Your work is A1. I would be honored for you to build me a bobber.
@av8660
7 жыл бұрын
KB, Iam very pleased by your comment. But I only build them for myself. Where do you live?
@brandonk7949
4 жыл бұрын
Build your own.
@zardportugal9 жыл бұрын
SUPERB! Congrats.
@frikkravenna92364 жыл бұрын
Complimenti gran bel ferro!! 👍
@TheRobynhud6 жыл бұрын
Work of art and craft.Very Well done .
@av8660
6 жыл бұрын
Thanks
@robverhagen63385 жыл бұрын
Echt een hele mooie dikke bike geworden! Complimenten!
@Visurhomie2 жыл бұрын
more than anything i wish i had a space like this to work on mine, all nice and clean lol
@mikepagias25874 ай бұрын
I got a 750 vs , 28 years , 1 problem only those years- a small heat on my legs on summer time hehe
@peterwood236 жыл бұрын
Good work
@Stranglerxx775 жыл бұрын
Hare Krishna Dude a great looking bike and a classic song
@eastvilleds93937 жыл бұрын
love it.
@jeboytim5 жыл бұрын
lekker werk Andre! heb je de tijd goed aan besteed
@javiercano56027 жыл бұрын
Great build. Love the attention to detail. I have a 1994 intruder 800 that I am gonna start building and wanted to know how much am I looking to spend on a build like this. I apologize if the question is too forward.
@av8660
7 жыл бұрын
I spend € 2500 and a lot of labour :-) and that is not including the bike. All parts are overhauld en the bike is as new. some parts are handmade. If you want to buy them I think that it will cost about € 3000.
@jerenydennis99185 жыл бұрын
Love it I got a 1400 intruder and at the moment stuck the guy i bought it from mix matched the wires.. I wanted to know whats the least amount of wires I need for my bobber sorry can't find anything on goggle that matches the cdi
@av8660
4 жыл бұрын
Sorry, I don't have the drawings of a 1400. So I can't help you. Also it depends on what you going to use on your bobber, signals, lights, horn, etc..
@SonomaCountyLiving7 жыл бұрын
I was wondering how you got the rear suspension off with that chrome bar. I want to take the rear fender off and that ugly bar and do a single seat. Do you have suggestions? Also once you take the bar off. Do you need spacers where the rear suspension bolts to the bike? Thanks!
@av8660
7 жыл бұрын
The rear suspension just take out the bolts and that also for the chrome bar. But your swingarm will be loos. So catch that one with some strut. I placed strut instead of suspension. to place a solo seat watch the movie, I made the parts by myself, be creative :-). you also can buy products at bluecollarbobbers.com/ but also than you need to adjust these because they don't have parts for this VS800.
@Nightingale18874 жыл бұрын
The second song is from The Motorcycle Diaries? Good build.
@av8660
4 жыл бұрын
No, Wanted dead or alive (The hit Nation)
@Ronaldo302344 жыл бұрын
Belíssimo trabalho! Qual valor de um trabalho desses?
@godschosenephraim89228 жыл бұрын
i love the video i just bought a 750cc intruder.. ugly orange! lol. And this is what i wanted to do but just with a nice solo cushion seat and not spring. igreat video
@av8660
8 жыл бұрын
+Ferrari Fresh Thanks for loving the video, great succes too you with rebuilding the 750 CC.
@godschosenephraim8922
8 жыл бұрын
Yw welcome. Keep up that great work!
@godschosenephraim8922
8 жыл бұрын
+Andre van der Veen where did you get a rear fender? i bought a 7.5 flat fender like a idiot, and its way to big!! did you bolt the rear fender also on to the frame?
@av8660
8 жыл бұрын
+Ferrari Fresh The rear fender from bluecollarbobbers.com/ The fender is mounted on the swingarm with a bracket what is shipped with the fender from Blue Collar Bobber. But you can make by yourself...
@godschosenephraim8922
8 жыл бұрын
Na. Those ppl are crazy! Prices are insane. Do you remember the width of the fender
@alejandromarin52242 жыл бұрын
Great build! Not many videos out there for intruders.. I just recently purchased a 1987 700. Where did you get the turning signals
@av8660
2 жыл бұрын
Thanks, you can buy the signals here: bluecollarbobbers.com/
@AndreasBaum-qb5wj3 ай бұрын
Hi ...mega der umbau, hast du zufällig Maße von der Grundplatte für den Sitz?
@WoWEvan18 жыл бұрын
Love your work! What year is your bike? and do you think that BCB would fit for an 1987 intruder 800 ?
@av8660
8 жыл бұрын
+Dustin Buchanan Thanks, the bike is from 1992. BCB has not a kit that will fit. But you can modify some parts from the kit, so it will fit. I made several parts by myself. Ask BCB.
@tylertheoufan5 жыл бұрын
Andre, can you tell me witch wires go to what on the fuel pump plug somebody cut the male end off. I’m just gonna hard wire and by pass the plug. Should be the 4 pin pin connector
@av8660
5 жыл бұрын
Hello, sorry I can't tell you, because the bike is sold.
@jasonevon30527 жыл бұрын
Awesome bike , good job dude ! Just wondering what kind of forward controls are those and where'd you get em from ? I have the same bike and am trying to do some work on it .
@av8660
7 жыл бұрын
The forward controls you can buy at Ebay, follow the link: www.ebay.nl/itm/PEDANE-AVANZATE-COMANDI-AVANZATI-SUZUKI-INTRUDER-VS600-VS750-VS800-SOTTOCOSTO-/282002037096?hash=item41a8a19968:m:mTeSQ9sczbQQl26jDSJzugQ
@jasonevon3052
7 жыл бұрын
Thanks for the info , again good job
@kristianpersson62516 жыл бұрын
Hi, this sheet you build underneat the seat. Did you bend this by hands or did you use any machine ? I would likte to do the same on my intruder but need some more info. Even better if you have any measurments left to send me.
@av8660
6 жыл бұрын
Hello Kristian, I used a bench screw vice and some wood and a bog Hammer...:-) I have no measurements, I just made it fit on the bracket.
@kristianpersson6251
6 жыл бұрын
But what was the material you used for this? Because it looks like 3 mm sheet metal ? I belive it was very hard hammer this?
@av8660
6 жыл бұрын
The material is Aluminium 1,5 mm so it was not hard to hammer this because of the cuts. Later on I put fiberglass on..
@MrSerkit6 жыл бұрын
Where did you mount the ECU? I am rebuilding a 87 vs 700 into bobber and im having a hard time figuring out where to put it. Also i love the turn signals, where did you get them? did you make the seat bracket yourself or buy?
@av8660
6 жыл бұрын
If you look at the youTube movie at 5:15 you see that the ECU is fitted under the seat bracket. The seat bracket i made by myself from aluminium. The lightbulb / signals I buy them at Blue Collar Bobbers bluecollarbobbers.com/ with smoked glass.
@MrSerkit
6 жыл бұрын
Awesome build man, it’s the reason I bought one :). Yea I tried to find it but it seemed to just disappear. I plan on using a solo seat from an intruder. I may have to cut out under the seat for it to fit because I don’t believe it will without being crushed. How much of a pain was it taking off the fender rails, I can’t find any info on doing it. Did you need to make spacers at the shocks because you removed? Are the struts and fender from the same vendor?
@av8660
6 жыл бұрын
Thanks, If you make some space for the ECU by cutting under the seat make sure that the electrical parts are protected for rain. It was no pain at all to remove the fender rails and I made bushes (aluminium) for the struts witch I used instead of the shock absorbers. Make sure that you use a fender that will be mounted on the swingarm, otherwise you cant dismounted the fender rails. The struts are made of iron pipe (central heating pipe) the end I crushed in a Vise en the seam I welded witch silver. the fender you can buy at Blue Collar Bobbers. but the are several online shoops wher you can buy them.
@MrSerkit
6 жыл бұрын
You made the spacers that took the place of the fender rails? Im going to be keeping original shocks on the bike. Is the fender connected to anything else on the bike besides the swing arm?
@av8660
6 жыл бұрын
The spacers ar for the struts. if you keep the absorbers then you don't need them. The fender is only mounted on the swingarm.
@duckilythelovely3040 Жыл бұрын
And here I can't even find replacement carbs, or intake BOOTS for my 2002 vs800 intruder., Somehow you rebuild the whole thing. LMAOOO
@davidcaira1070 Жыл бұрын
Hey man sick bike! What bars did you end up putting on the bike?
@av8660
Жыл бұрын
you mean the shock absorber? In this case I used thick-walled pipe. The end pinched together
@mastabas2 жыл бұрын
Interesting... So instead of cutting the frame you were able to just replace the rear shocks with links you made? I have this same bike and definitely jealous of yours!
@av8660
2 жыл бұрын
No, the frame has not been modified, that is not allowed by Dutch law. The struts are made of thick-walled tubing. Slightly shorter than the original shock absorbers.
@austin_doke26546 жыл бұрын
Awesome bike man! What did you do with the cdi box?
@av8660
6 жыл бұрын
Hi there, Thanks for the compliment. if you look at 5:16 of the clip you can see where the CDI is mounted (with the white connectors)
@EnlightenedSavage
4 жыл бұрын
@@av8660 which cdi box did you purchase? Im looking for one myself.
@av8660
4 жыл бұрын
@@EnlightenedSavage The original from the bike it self. So if you need to buy a new one check the numbers on the CDI and google. I am sure you will find a new one
@MrDabrucru5 жыл бұрын
Were did you put the ecu box? Thanks
@av8660
4 жыл бұрын
see the movie at 5.15 there you can see the ECU under the seat
@ariel746 жыл бұрын
HORRIBLE UN PECADO CON LO HERMOSA QUE ESTABA.
@MarcelHVAC6 жыл бұрын
Hoe is het rijcomofort nu je de schokbrekers hebt vervangen door vaste stangen?
@av8660
6 жыл бұрын
Uiteraard een stuk minder comfort, zeker als je op een hobbelige weg rijd, de veren onder het zadel vangen lang niet alles op.
@MarcelHVAC
6 жыл бұрын
Bedankt voor je reactie, ik wil ook een bobber gaan bouwen maar het is een keus tussen mooi (hardtail) en minder mooi maar comfort (softtail) Ga toch voor het mooie denk ik.
@MrDaroyboy6 жыл бұрын
He Andre, aller eerst de complimenten met dit project (ook al is dit al even geleden). Ik ben zelf bezig met het verbouwen van een Intruder VS750. Demontage van het blok is overigens wel echt een kl*te werk. Heb jij de chromen delen met wrap gespoten of op een andere manier? Aangezien chrome een slechte hechtlaag is..
@av8660
6 жыл бұрын
Mr. Kwaker, ik weet even niet over welke chromen delen jij het hebt dus als je wat specifieker kan zijn dan graag. Maar als je chromen delen wilt behandelen dan adviseer ik je deze delen te laten stralen en daarna poeder coaten, dit doe ik altijd met chromen delen.
@peterbouwman72637 жыл бұрын
zie dat het al een oude topic is, maar schitterende bike geworden, hoelang ben je hier in totaal mee bezig geweest?
@av8660
7 жыл бұрын
Peter, dank je wel. Ik denk dat er een 100 uur werk in zit, dit omdat er nogal wat ge-engineert moest worden en uiteindelijk ook zelf veel onderdelen heb gemaakt. Ik denk dat het korter kan, maar ja het is een hobby. De totale doorlooptijd kleine 3 maanden.
@patwhited1428 жыл бұрын
how to put side plate back on under seat
@av8660
8 жыл бұрын
Pat, it can be done by slide the cover under the (self made) plate and than click on the originals brackets.
@diznuttz57062 жыл бұрын
Cool video love that clean 800👍but guy who song the Bon Jovi song is horrible 👎
@500honda10003 жыл бұрын
Hey ik zag net je filmpje. Ik heb sinds vandaag een intruder gekocht die verlaagd is maar krij met geen mogelijkheid de accu eruit aangezien ik al niet bij de polen kan komen om die los te maken heb jij een tip voor me?
@av8660
3 жыл бұрын
Hoi, dan blijft er niets anders over dan voldoende opkrikken, accu gaat er van onderen uit maar als kabels niet lang genoeg zijn en je komt er echt niet bij zal je andere onderdelen weg of los moeten halen om je kabels los te maken. anders even een foto plaatsen kan ik zien hoe het zit
Thank you, but how did you remove the filter box, not the filter? Do I need to remove the engine?
@desydesi83227 жыл бұрын
Katastrophal!
@av8660
7 жыл бұрын
Thanks
@volpestorm6615 Жыл бұрын
e mecojoni!!
@leofaller47902 жыл бұрын
Hallo wie tauscht man den Gaskabel gibt es ein Wideo?
@av8660
2 жыл бұрын
Nein, kein Video, aber: Bauen Sie Ihren Gasgriff vom Lenkrad ab. Jetzt können Sie das Kabel spannungsfrei von Griff und Vergaser entfernen. Beim neuen Kabel alles in umgekehrter Reihenfolge. Viel Glück
@Keloithoi3 жыл бұрын
Brother do you take order to do a same one please
@av8660
3 жыл бұрын
Hey I am sorry but can’t do. Its only a hobby.
@jeffreymoffitt40705 жыл бұрын
I'm in desperate need of help and advice on this exact bike. I bought mine a few weeks ago and it needs a complete wiring harness, and a bunch of other things and this is the only video I've seen if someone doing a complete rebuild. Add me on Facebook if you can, my name is the same there.
@rogeliogutierrez62678 ай бұрын
Mi moto es intruder2003. No arranca. Elboton de arrangue.no hace contacto.
@TheREALOC1972 Жыл бұрын
I 'm glad you didn't mess with the neck. That neck is what makes it a intruder, when you see an Intruder you KNOW it's an Intruder. Should have painted the tank and fenders though, Loud pipes saves lives, but so does load paint. Your 8 times more likely to be hit by a car/truck than you are on any other color bike plus it's boring, basic bitch black shows no imagination.
@juliocesarmedeiros92223 жыл бұрын
Só eu prefiro original?
@av8660
3 жыл бұрын
Ok, original the VS800 is also a nice bike 👍
@benrose7534 Жыл бұрын
One way to distroy a perfectly nice bike
@erikfotyi7364 жыл бұрын
Hát ez csúnya lett. A szerelő gárda profi, de haaaat...
Пікірлер: 112
This cycle was originally designed by the top chopper builders in the USA. It’s amazing what a can of flat black pain can do.
Kudos! I enjoyed every minute of this. I have a 99 VS800 and this jolted my ego. I feel pride
@av8660
7 жыл бұрын
Thanks, and you are right to be pride.
Super Projekt die Suzi als Bobber umzubauen, vielen Dank für die kreativen Lösungen... Top, und weiter so...
That's a bad ass fucking bike. Great job brother
I love these bikes.Only thing is the front of the frame near steering tube looks awful.Great Job here!! Bravo!!
Complimenti " NL " ottimo lavoro. 800 Intruder Forever.
@av8660
3 жыл бұрын
Thanks
Everything from the cleanliness of your workspace, down to the details. Your work is A1. I would be honored for you to build me a bobber.
@av8660
7 жыл бұрын
KB, Iam very pleased by your comment. But I only build them for myself. Where do you live?
@brandonk7949
4 жыл бұрын
Build your own.
SUPERB! Congrats.
Complimenti gran bel ferro!! 👍
Work of art and craft.Very Well done .
@av8660
6 жыл бұрын
Thanks
Echt een hele mooie dikke bike geworden! Complimenten!
more than anything i wish i had a space like this to work on mine, all nice and clean lol
I got a 750 vs , 28 years , 1 problem only those years- a small heat on my legs on summer time hehe
Good work
Hare Krishna Dude a great looking bike and a classic song
love it.
lekker werk Andre! heb je de tijd goed aan besteed
Great build. Love the attention to detail. I have a 1994 intruder 800 that I am gonna start building and wanted to know how much am I looking to spend on a build like this. I apologize if the question is too forward.
@av8660
7 жыл бұрын
I spend € 2500 and a lot of labour :-) and that is not including the bike. All parts are overhauld en the bike is as new. some parts are handmade. If you want to buy them I think that it will cost about € 3000.
Love it I got a 1400 intruder and at the moment stuck the guy i bought it from mix matched the wires.. I wanted to know whats the least amount of wires I need for my bobber sorry can't find anything on goggle that matches the cdi
@av8660
4 жыл бұрын
Sorry, I don't have the drawings of a 1400. So I can't help you. Also it depends on what you going to use on your bobber, signals, lights, horn, etc..
I was wondering how you got the rear suspension off with that chrome bar. I want to take the rear fender off and that ugly bar and do a single seat. Do you have suggestions? Also once you take the bar off. Do you need spacers where the rear suspension bolts to the bike? Thanks!
@av8660
7 жыл бұрын
The rear suspension just take out the bolts and that also for the chrome bar. But your swingarm will be loos. So catch that one with some strut. I placed strut instead of suspension. to place a solo seat watch the movie, I made the parts by myself, be creative :-). you also can buy products at bluecollarbobbers.com/ but also than you need to adjust these because they don't have parts for this VS800.
The second song is from The Motorcycle Diaries? Good build.
@av8660
4 жыл бұрын
No, Wanted dead or alive (The hit Nation)
Belíssimo trabalho! Qual valor de um trabalho desses?
i love the video i just bought a 750cc intruder.. ugly orange! lol. And this is what i wanted to do but just with a nice solo cushion seat and not spring. igreat video
@av8660
8 жыл бұрын
+Ferrari Fresh Thanks for loving the video, great succes too you with rebuilding the 750 CC.
@godschosenephraim8922
8 жыл бұрын
Yw welcome. Keep up that great work!
@godschosenephraim8922
8 жыл бұрын
+Andre van der Veen where did you get a rear fender? i bought a 7.5 flat fender like a idiot, and its way to big!! did you bolt the rear fender also on to the frame?
@av8660
8 жыл бұрын
+Ferrari Fresh The rear fender from bluecollarbobbers.com/ The fender is mounted on the swingarm with a bracket what is shipped with the fender from Blue Collar Bobber. But you can make by yourself...
@godschosenephraim8922
8 жыл бұрын
Na. Those ppl are crazy! Prices are insane. Do you remember the width of the fender
Great build! Not many videos out there for intruders.. I just recently purchased a 1987 700. Where did you get the turning signals
@av8660
2 жыл бұрын
Thanks, you can buy the signals here: bluecollarbobbers.com/
Hi ...mega der umbau, hast du zufällig Maße von der Grundplatte für den Sitz?
Love your work! What year is your bike? and do you think that BCB would fit for an 1987 intruder 800 ?
@av8660
8 жыл бұрын
+Dustin Buchanan Thanks, the bike is from 1992. BCB has not a kit that will fit. But you can modify some parts from the kit, so it will fit. I made several parts by myself. Ask BCB.
Andre, can you tell me witch wires go to what on the fuel pump plug somebody cut the male end off. I’m just gonna hard wire and by pass the plug. Should be the 4 pin pin connector
@av8660
5 жыл бұрын
Hello, sorry I can't tell you, because the bike is sold.
Awesome bike , good job dude ! Just wondering what kind of forward controls are those and where'd you get em from ? I have the same bike and am trying to do some work on it .
@av8660
7 жыл бұрын
The forward controls you can buy at Ebay, follow the link: www.ebay.nl/itm/PEDANE-AVANZATE-COMANDI-AVANZATI-SUZUKI-INTRUDER-VS600-VS750-VS800-SOTTOCOSTO-/282002037096?hash=item41a8a19968:m:mTeSQ9sczbQQl26jDSJzugQ
@jasonevon3052
7 жыл бұрын
Thanks for the info , again good job
Hi, this sheet you build underneat the seat. Did you bend this by hands or did you use any machine ? I would likte to do the same on my intruder but need some more info. Even better if you have any measurments left to send me.
@av8660
6 жыл бұрын
Hello Kristian, I used a bench screw vice and some wood and a bog Hammer...:-) I have no measurements, I just made it fit on the bracket.
@kristianpersson6251
6 жыл бұрын
But what was the material you used for this? Because it looks like 3 mm sheet metal ? I belive it was very hard hammer this?
@av8660
6 жыл бұрын
The material is Aluminium 1,5 mm so it was not hard to hammer this because of the cuts. Later on I put fiberglass on..
Where did you mount the ECU? I am rebuilding a 87 vs 700 into bobber and im having a hard time figuring out where to put it. Also i love the turn signals, where did you get them? did you make the seat bracket yourself or buy?
@av8660
6 жыл бұрын
If you look at the youTube movie at 5:15 you see that the ECU is fitted under the seat bracket. The seat bracket i made by myself from aluminium. The lightbulb / signals I buy them at Blue Collar Bobbers bluecollarbobbers.com/ with smoked glass.
@MrSerkit
6 жыл бұрын
Awesome build man, it’s the reason I bought one :). Yea I tried to find it but it seemed to just disappear. I plan on using a solo seat from an intruder. I may have to cut out under the seat for it to fit because I don’t believe it will without being crushed. How much of a pain was it taking off the fender rails, I can’t find any info on doing it. Did you need to make spacers at the shocks because you removed? Are the struts and fender from the same vendor?
@av8660
6 жыл бұрын
Thanks, If you make some space for the ECU by cutting under the seat make sure that the electrical parts are protected for rain. It was no pain at all to remove the fender rails and I made bushes (aluminium) for the struts witch I used instead of the shock absorbers. Make sure that you use a fender that will be mounted on the swingarm, otherwise you cant dismounted the fender rails. The struts are made of iron pipe (central heating pipe) the end I crushed in a Vise en the seam I welded witch silver. the fender you can buy at Blue Collar Bobbers. but the are several online shoops wher you can buy them.
@MrSerkit
6 жыл бұрын
You made the spacers that took the place of the fender rails? Im going to be keeping original shocks on the bike. Is the fender connected to anything else on the bike besides the swing arm?
@av8660
6 жыл бұрын
The spacers ar for the struts. if you keep the absorbers then you don't need them. The fender is only mounted on the swingarm.
And here I can't even find replacement carbs, or intake BOOTS for my 2002 vs800 intruder., Somehow you rebuild the whole thing. LMAOOO
Hey man sick bike! What bars did you end up putting on the bike?
@av8660
Жыл бұрын
you mean the shock absorber? In this case I used thick-walled pipe. The end pinched together
Interesting... So instead of cutting the frame you were able to just replace the rear shocks with links you made? I have this same bike and definitely jealous of yours!
@av8660
2 жыл бұрын
No, the frame has not been modified, that is not allowed by Dutch law. The struts are made of thick-walled tubing. Slightly shorter than the original shock absorbers.
Awesome bike man! What did you do with the cdi box?
@av8660
6 жыл бұрын
Hi there, Thanks for the compliment. if you look at 5:16 of the clip you can see where the CDI is mounted (with the white connectors)
@EnlightenedSavage
4 жыл бұрын
@@av8660 which cdi box did you purchase? Im looking for one myself.
@av8660
4 жыл бұрын
@@EnlightenedSavage The original from the bike it self. So if you need to buy a new one check the numbers on the CDI and google. I am sure you will find a new one
Were did you put the ecu box? Thanks
@av8660
4 жыл бұрын
see the movie at 5.15 there you can see the ECU under the seat
HORRIBLE UN PECADO CON LO HERMOSA QUE ESTABA.
Hoe is het rijcomofort nu je de schokbrekers hebt vervangen door vaste stangen?
@av8660
6 жыл бұрын
Uiteraard een stuk minder comfort, zeker als je op een hobbelige weg rijd, de veren onder het zadel vangen lang niet alles op.
@MarcelHVAC
6 жыл бұрын
Bedankt voor je reactie, ik wil ook een bobber gaan bouwen maar het is een keus tussen mooi (hardtail) en minder mooi maar comfort (softtail) Ga toch voor het mooie denk ik.
He Andre, aller eerst de complimenten met dit project (ook al is dit al even geleden). Ik ben zelf bezig met het verbouwen van een Intruder VS750. Demontage van het blok is overigens wel echt een kl*te werk. Heb jij de chromen delen met wrap gespoten of op een andere manier? Aangezien chrome een slechte hechtlaag is..
@av8660
6 жыл бұрын
Mr. Kwaker, ik weet even niet over welke chromen delen jij het hebt dus als je wat specifieker kan zijn dan graag. Maar als je chromen delen wilt behandelen dan adviseer ik je deze delen te laten stralen en daarna poeder coaten, dit doe ik altijd met chromen delen.
zie dat het al een oude topic is, maar schitterende bike geworden, hoelang ben je hier in totaal mee bezig geweest?
@av8660
7 жыл бұрын
Peter, dank je wel. Ik denk dat er een 100 uur werk in zit, dit omdat er nogal wat ge-engineert moest worden en uiteindelijk ook zelf veel onderdelen heb gemaakt. Ik denk dat het korter kan, maar ja het is een hobby. De totale doorlooptijd kleine 3 maanden.
how to put side plate back on under seat
@av8660
8 жыл бұрын
Pat, it can be done by slide the cover under the (self made) plate and than click on the originals brackets.
Cool video love that clean 800👍but guy who song the Bon Jovi song is horrible 👎
Hey ik zag net je filmpje. Ik heb sinds vandaag een intruder gekocht die verlaagd is maar krij met geen mogelijkheid de accu eruit aangezien ik al niet bij de polen kan komen om die los te maken heb jij een tip voor me?
@av8660
3 жыл бұрын
Hoi, dan blijft er niets anders over dan voldoende opkrikken, accu gaat er van onderen uit maar als kabels niet lang genoeg zijn en je komt er echt niet bij zal je andere onderdelen weg of los moeten halen om je kabels los te maken. anders even een foto plaatsen kan ik zien hoe het zit
I also hafe suzuki intruder 750
@salmonjohnsalmonjohn1369
5 жыл бұрын
Think make like this
Nice but I’d leave it a soft tail bro
@av8660
5 жыл бұрын
Thanks Todd.
How do I remove the front air box?
@av8660
4 жыл бұрын
Check youtube. : kzread.info/dash/bejne/nJirj7CKnNzYerQ.html
@kykinks
4 жыл бұрын
Thank you, but how did you remove the filter box, not the filter? Do I need to remove the engine?
Katastrophal!
@av8660
7 жыл бұрын
Thanks
e mecojoni!!
Hallo wie tauscht man den Gaskabel gibt es ein Wideo?
@av8660
2 жыл бұрын
Nein, kein Video, aber: Bauen Sie Ihren Gasgriff vom Lenkrad ab. Jetzt können Sie das Kabel spannungsfrei von Griff und Vergaser entfernen. Beim neuen Kabel alles in umgekehrter Reihenfolge. Viel Glück
Brother do you take order to do a same one please
@av8660
3 жыл бұрын
Hey I am sorry but can’t do. Its only a hobby.
I'm in desperate need of help and advice on this exact bike. I bought mine a few weeks ago and it needs a complete wiring harness, and a bunch of other things and this is the only video I've seen if someone doing a complete rebuild. Add me on Facebook if you can, my name is the same there.
Mi moto es intruder2003. No arranca. Elboton de arrangue.no hace contacto.
I 'm glad you didn't mess with the neck. That neck is what makes it a intruder, when you see an Intruder you KNOW it's an Intruder. Should have painted the tank and fenders though, Loud pipes saves lives, but so does load paint. Your 8 times more likely to be hit by a car/truck than you are on any other color bike plus it's boring, basic bitch black shows no imagination.
Só eu prefiro original?
@av8660
3 жыл бұрын
Ok, original the VS800 is also a nice bike 👍
One way to distroy a perfectly nice bike
Hát ez csúnya lett. A szerelő gárda profi, de haaaat...
you ruined a beautiful bike
@av8660
6 жыл бұрын
Toretto, haha you like Trump....
@dariopastorino69
6 жыл бұрын
Andre van der Veen you like Berlusconi?
@av8660
6 жыл бұрын
Torettootje do you miss your mommy. Haha. Lol
@dariopastorino69
6 жыл бұрын
you should learn to accept criticism ...
@av8660
6 жыл бұрын
Toretto oké you have a point, thanks.