tutorials are more than welcome ,i have the quick addons since a while and sometimes i forgot how to use them

The Blender community is so encouraging and supportive that sometimes praise is given where something could be said to help in the improvement of, say, tutorials, et al. so hopefully you see these as constructive and not critical. 1) *In Preferences: Interface>Resolution Scale should probably be turned up when recording a tutorial.* Even though it might make Blender look "cartoon-y" on your screen, it's a bit difficult to see your interface on a 41" monitor on full resolution. That makes it impossible to really see what you're clicking on or what's there to click on so it's difficult to follow along and see what's being done. 2) *Volume is a little low.* Although that's common and probably not a problem for headphone users, it's a bit inconvenient to have to max out every volume control in hardware and software to really hear what you're saying. 3 *A stronger structure to the presentation can be helpful.* Maybe something in an outline form or sectioned off or a summary at the beginning of what's going to be covered etc. Anyway, thanks for the contribution. Always appreciated.

Thank god for this. I bought this add-on a while back and just couldn’t figure out the workflow despite Jama’s videos. This makes it so much more understandable. Can’t wait to revisit this now

Thank you so much for this overview. This is an extraordinary toolset.

Great as usual, thanks you for the video Aleksander, waiting for more like this one ! :D

been using this addon for almost 3 months still can't wrap my head around how good it is actual magic, thx

Very useful tool for a fine artist only using basic 3D stuff like me. Being able to apply multiple materials to the same object is a great addition!

This is such a great tool! its really going to change my concept game, thanks man!

Went to the discord, was about to ask if there were any new tutorials. Saw the tutorial lobby. Now I am here. Watched and now have a much clearer understanding on how to use QT. Like any addon, you have to use to improve and use without thinking. I had stopped using all the Quicktools as I was getting alot of issues. Have downloaded the latest version and from all accounts, they are all working with no crashes (yet fingers crossed!). Only suggestion, cast keys would be handy during the session. When you did the texturing then presses C to blend the textures, I had to watch that several times to see what changed in the menu! Now off to watch the other tutorials. Need to understand quickdeform better...

SUPER helpful, thank you!

i love this addon!!

Thanks, this is greatly appreciated!

Lovely update, thank you Alexander for all the great work and effort. I really love Quick Texture, all this workflow should be integrated in blender by default. Can you add a quick node setup for displacement? It would be cool to use a provided heightmap (if available) or try to infer one from another map (grayscaled diffuse or roughness or AO) and tweak strength, apply low/high/band pass filter and a number of subdivisions for render/viewport settings. If performance is an issue there might be an option to avoid realtime visual update of the displacement... most of the times it would be sufficient at least to prepare the modifiers to avoid getting in and out the quicktexture node and do it for every object. I know I'm a f**king lazy ass. =P Another couple of UX suggestions: - ESC shortcut to abort the current parameter tweaking (i.e. bump strength, normal strength, hue contrast saturation, etc) with the consequent restore of the previously set value. D (or something else) for the default value. - The possibility to input a value (again for... bump strength, normal strength, hue contrast saturation, etc) by keyboard. Thank you!

Glad to see tutorials!. To be honest even though I bought quick addons I didnt use it and it was kind of reckless and assholish to not have any tutorial on youtube and only use discord that doesnt even have much in it.

great tutorial, please when u make this can you section out the parts so its easy to follow and go back to

Hi, I'm just trying it for the first time and I'm getting a bug in blender 3.3 where for the Ctrl+Shift+D Decal not every polygon is rendered. So I move the decal around and some polygons of the decal mesh blink in and out, it looks like an irregular grid. Would be easier to show an image. So what would be the best place to ask for feedback on this?

If you're like me and just wanted the drag and drop feature of adding your PBR files then Node wrangler actually does this already for free.

Is there a way to replace a texture? so maybe I picked the wrong on by accident and and instead con adding another layer with no mast can the current layer texture be replaced?

Amazing Addon and tutorials. Is there any efficient/quick and easy way to use displacement map with Quicktexture ? To displace the mesh. Because in the quicktexture shader, there is no input for diplacement map.

@Denonify

2 жыл бұрын

Thank you for the response. Yes makes sense.

WOW

Thanks Alksndr, everything you explained about this plugin sounds good. But is there a way of doing a decent displacement without jumping over the usual Blender hurdles (ie displacement modifiers etc)

@constantineskliris

2 жыл бұрын

@@ALKSNDR Thanks ALKSDR when you add triplanar and texture displacement, let me know

This is awesome usefull! Would it be possible to make it load an existing material thats been already applied to an object? I am using Quixel Megascans alot and i like how i can directly bridge materials into my scene without having to go into the download folder everytime

@Constantinesis

2 жыл бұрын

@@ALKSNDR Then that's wonderful!

FUCK YEAAAAAAAAAAAAAAAA😎It's XMAS!!!

This might have already been answered but I see you loading the textures and QT converting them into materials. Is it possible to use premade material libraries from our asset libraries as opposed to going in each directory and loading maps from it?

hello i m trying quick texture.when i try to move, scale or rotate the texture in edition mode, it s the cube itself that is scaling(s), rotating(r), or moving(g).i have blender 3.4.1

I have a problem :( ... I give it Ctrl T and put the textures on it, but if I deselect the object and then select it again and give it Alt R to change textures I get an error message and it doesn't let me, and worse Even if I give it Ctrl T again, the program closes. Basically I can't change textures. In short, if I deselect and select again I lose everything, any solution? Thanks!

@ALKSNDR Hey! I was wondering if you could share where I could find some of the texture masks that you use. Thanks so much.

If I have to make a texture with one image what do I do , only base color and roughness bump using that same one!? 😅

Thank you!!

@ALEKSNDR 25:02 I'm using KZread's auto-captions and the transcription says, "so if you go into the Eighth (8)-map […] this is the randomization mode […]": I don't see this key being documented in the N-panel and I'm a bit confused as for how to enter this mode. I'm not by the computer right now so I can't try the 8 key, but nevertheless, I think leaving it up to the user to remember this key, isn't ideal. In short: how do you enter the randomization mode and how do you know (without going back to this video) how to enter this mode?

@mixchief

2 жыл бұрын

@@ALKSNDR Now I feel ridiculous. Sorry.

Is there a way to bake, for ex, decals on a wall into a combined single texture of wall-and-decals?

@FireBert85

2 жыл бұрын

@@ALKSNDR man that would be the dream. finally started to get the hang of this and a big fan. 'nother question. Anyway to make decals follow changes in geometry angles? (ex, I've got a concrete panel line going across the wall and to a door way that's beveled inward, the panel line decal comes up and stops at the wall where the bevel begins--and it doesnt project/wrap to the angled bevel) Edit: Disregard, found the Resolution setting, increased it, and got the desired result.

Cool tutorial. guys which addon is better? Quick texture or Mask tool? help me please. Thanks

@Frostensen

Жыл бұрын

@@blendershots what do you mean by that pls?

When using the interface in Japanese, an error occurs and it does not work properly. I have not tried all languages, but it is possible that other languages cannot be used properly. Can this be remedied?

when is this awesome add-on going to be available in 3.2?

@___x__x_r___xa__x_____f______

2 жыл бұрын

@@ALKSNDR amazing thanks

When applying different textures in a single object, it affects the other faces as well - not just the face i selected. Anything I missed?

@ALKSNDR

Жыл бұрын

That shouldn't be the case, are you updated to the very latest version on gumroad? If you have a QT applied on an object then go into edit mode, select a face, Ctrl+T to create a new texture it will be applied only to that face on the latest

Where can i get the textures for free? My Quixel bridge doesnt import texture right now because it is not supporting 3.1 version yet

@zimlo9784

2 жыл бұрын

@@ALKSNDR oh ok, thanks sir!

you must use adobe's tool podcast for cleaning up the noise in your audio and enhance the vocal. Great video but really poor audio

Colour tinting, procedural noise... Hand painted masking features are also available with this?

@blendershots

2 жыл бұрын

@@ALKSNDR what to do in case if want to apply texture to some specific portion of a mesh?

@blendershots

2 жыл бұрын

@@ALKSNDR does it require uv unwrapping?

Will it work on Blender 3.0?

what happened to quikshape i bought it a while ago and cant re download it

@ALKSNDR

5 ай бұрын

Should still be there in your gumroad account library, ask gumroad support if you bought it when you weren't logged in they will help

For the life of me I cannot get this to work. I have updated it to 2022. Removed it / installed it. Changed the hot key / removed it - downloaded it again. Installed it / Looked over the shader nodes / Tried different textures and all I ever get is a colored glossy object. No texture. Have tried it with JPG and PNG files - same result. Using blender 3.1. Any thoughts?

@andyklyen6885

2 жыл бұрын

And now CTRL T has stopped working - reinstalled - checked the keymapping - ( I'm getting the feeling the my lack of a texture maybe due to an unwrapping issue. Realtime textures, Masktools and PBR Extreme work no problem. I was going to try and unwrap my cube before using Quicktexture but I can't get Ctrl T to work anymore. Perhaps there's a conflict with the tools previously mentioned tools? Will uninstall for the moment..

@andyklyen6885

2 жыл бұрын

@@ALKSNDR Thanks very much for the reply - I'll work on it a bit more today and join the discord with a video if I can't sus it out. I'll let you know what's causing the problem if I can figure it out.....

@andyklyen6885

2 жыл бұрын

@@ALKSNDR Hi again - sorry for using KZread - the Discord for Quicktools seems to be down? A little progress. If I untick Force Proc. UVs the texture appears immediately but, of course, I cannot resize without stretching etc. So it seems to be linked to forcing the procedural UVs? Happy to use Discord - could you send me a link as mine seems to be broken with a 'failed to download messages'

Audio too low. Please increase volume. Thanks

Does this work for blender 4.0?

@ALKSNDR

4 ай бұрын

yeah the addons are working in 4.0 and we just released new updates for 4.1 few days ago

@romolodgtechnologies7958

Ай бұрын

Can do you inform the link to 4.1 version? In the webpage show the last updated to 3.4. thnx!

@ALKSNDR

Ай бұрын

@@romolodgtechnologies7958 the description has not been updated in a while but the files inside are! jamajurabaev.gumroad.com/l/CRbkx?layout=profile

Hello, I just wanted to give you a heads up that quick texture seems to be bugged in blender newer than 3.3. The texture balloon and look detached when you view it in render view both is cycles and eevee on models I import with happens with blender 3.4 and 3.5. You could really see the bug when you scale in quick tools the texture dance around looking unattached. When I go back to Blender 3.3 everything is fine and I can scale texture without any issue. Hopefully these bugs can get address so I can use quick texture on the latest version of Blender. @ALKSNDR

@Savorychicken41

Жыл бұрын

@@ALKSNDR Thank you so much for replying. The detachment and ballooning only happens only in blender 3.4 and 3.5. It works perfect in 3.3 on the same model. So I've been using QT in 3.3 then reopening the file in 3.5 and then that same QT would work fine. But if I start QT in 3.5 it has the error and that error would carry to any version. This only happens with models I import not the ones I make in Blender. I thought it was because the models have tri faces but even after converting to quads it still had the same issues. Plus when I open that same model in 3.3 qt works great. I am using the latest version of QT.

@Savorychicken41

Жыл бұрын

@@ALKSNDR You know what, I just thought about what you were saying in your first reply and figured it out. I just went into the nodes and disconnected the displacement node. Now everything seem normal. And I see now that you can press 0 and lower the displacement value to 0 to remove. Thank you so much for the help!