Looks like this may be the last time you get early access to Bambu 😨

@user-jx5hy5ej8v

8 ай бұрын

Can't agree more

@thenextlayer

8 ай бұрын

Yep.

@teslar1

8 ай бұрын

@@thenextlayer unlucky there. I take it you put the wrong release time on it

@reverseflip

8 ай бұрын

@@teslar1 Uhh he literally says in the chat comments that he's going to release it to his Patreon subscribers before the NDA. Not an accident.

@thenextlayer

8 ай бұрын

twitter.com/jonathanalevi/status/1704394523365740618

Some other reviewers are saying things a bit differently than you. Makers Muse: It is still loud, fan noise ramping and the color changing cause the most noise. MM and Joel: No spaghetti detection via the camera.

@seljd

8 ай бұрын

also max bed temperature is 80°C

I think someone is going to be in trouble! lol

Way to leak it hope the companies black list you

Is there going to be any update to the input shaping or automatic calibration for the other printers through software?

You REALLY should’ve delayed this release and allowed the other content creators to recover a shred of what you cost them. Absolute degeneracy.

Was hoping for an IDEX version of the X1 or possibly a multicolor solution that wasn't so wasteful. (multiple filaments into a single print head) Is the purge between colors the same as the X1? seems that way from the video.

So the next layer has revealed despite blurring that the next bambu labs thing is white, and can be held in your hands. Bed slinger like Nathan thinks? or some add on mini-AMS?

Immediately after watching this, KZread played the review from Angus at MakersMuse. I find the differences informative. Angus has been around much longer and it shows. And while both fellows liked the machine Angus had many more negative observations/insights. I feel that Jonathan's enthusiasm may have got the better of him.

@eaman11

8 ай бұрын

Hey here you have "the privilege" of not having to thinker and chose your own files, it's a super small printer that only takes 3 times space of other printers for a smaller print size shooting junk all over the place...

@cosminlesutan3574

8 ай бұрын

@@Dimitris1963 maybe because Bambu lab has a special line for "good" reviewers and everyone that has something negative to say gets on the black list. Just look on how they delete bad posts on their forums

@TheNature101

8 ай бұрын

Not MakersMuse (my god, couldn't he find a more stable freaking table?) not TNL (violated the embargo) hold a candle to Aurora Tech. That little girl is putting them all to shame. To me, there is ONLY ONE reviewer that is worth watching. And that is Aurora Tech

@dannonyogurt98

8 ай бұрын

Same, this happened to me and I couldn't agree with you more. Calling it whisper quiet and recommending this to advanced people like Voron users was just bizarre. I said elsewhere this feels like a puff piece and 20:12 video may explain why he was not as critical (or at all) as others. Plus are we really supposed to believe that he didn't have any issues or failed prints on a brand new platform? I don't think I saw any in the video.

@timtim6182

8 ай бұрын

will check out @@TheNature101

Loooove the swatches! Not enough compagny does this! the printer look great and ium sure feels great to use. They really think of things that wouldnt even pop in my mind! Cant wait to see what next product they will release, or what feature they will bring to the next X1 IF im planning changing my prusa mk3s+, would you recommand to get a X1C now, or wait for a couple of month to see whats in store from bambu lab ?

@firewoodloki

8 ай бұрын

Seriously, ALL filament companies should offer swatches. I don't mind paying for them.

How does the new AMS Lite handle flexible and abrasive filaments?

can yopu use the ams lite with the other bamboo printers ?

Wow, this guy leaked it early… the pics are on Reddit and Facebook unofficial group… it’s definitely his studio

@senurasenaratne5782

8 ай бұрын

He deleted his comment, saying he will release it early on Patreon lol

@88rhoracio

8 ай бұрын

@@senurasenaratne5782wow , that sounds so unprofessional from him. I wish it saw the news from Bambu lab first.

@senurasenaratne5782

8 ай бұрын

update : he apologized on twitter

@88rhoracio

8 ай бұрын

@@senurasenaratne5782 what is his Twitter account? Looks like the one he had in his info is outdated

@thenextlayer

8 ай бұрын

Unfortunately, yeah. We weren’t careful enough with this draft video. Full explanation is here: twitter.com/jonathanalevi/status/1704394523365740618 We are all completely devastated at this monumental F up.

Question: can you disassemble this A1 mini so that it can fit a normal suitcase? I am traveling to Eurp and will stay there for a long time, and I am thinking of get this A1 mini and bring it with me.

Wow!!! I'd like to pre-order A1 mini and S4 filament dryer right now, all can hold four rolls of filaments at the same time, that's great for me!!!

Can the Bambu Filament Swatches be ordered separately?

Nice review! Btw what song did you use in the background in the begin of the review?

Will the combo fit together on a LACK table/in a LACK enclosure? I'm only finding measurements for the printer, not the AMS lite.

Did you test multicolor TPU prints?

I feel like companies are in a printing speed race when all I want is quality race and low failure rate race.

@conorstewart2214

8 ай бұрын

Most fast printers, especially the Bambu ones can do that too, just adjust the speeds and make it print slower. However the default speeds on the X1C are quite a bit slower than their fastest speeds but are high quality and reliable too. I have never had a print failure on my X1C. In other words what you are looking for already exists, you just aren’t seeing it. FDM will always be limited by nozzle size and flow rate, so there is a limit to how much quality you can get and it has been long reached, hence companies are keeping that same quality but also going for speed. If you need even higher quality then you should probably go for resin printing.

@JiiruKoga

8 ай бұрын

@@conorstewart2214 I own the X1C too and have had failures (maybe mostly because of my own faults), and don't like going over the 100% speed mode as I feel like the quality starts to dip at the higher speeds. I notice little imperfections at 150% speed. I'm using Sunlu basic filament. I bought high speed filament but just find it not cost effective. I'd rather buy another X1C than pushing the speed if I'm in some manufacturing crunch.

@conorstewart2214

8 ай бұрын

@@JiiruKoga that is what I said, that their default speeds are high quality and reliable, going faster depends on the model and filament. There isn't much point to high speed filament, at least with a bambu printer. I think the Bambu basic PLA is already optimized for higher speeds. If you look at the volumetric flow rate settings in bambu studio it is higher for bambu filament than generic PLA but that could just be for marketing or to make their filament look better but I have had good results using cheap PLA with the bambu PLA settings. The default speeds are already much faster than an ender 3 or MK3, if you need it for manufacturing quickly then you are better with a P1P or P1S than either an ender 3 or MK3 and they are more cost effective than an X1C. Now with the A1 mini it is an even cheaper option for only a slight decrease in speed. If you don't need an enclosure, are fine with the print volume and just need printing speed then the A1 mini is probably the best option now.

Rip affiliate status.

@thenextlayer

8 ай бұрын

Yep. We made a mistake, a huge lapse in judgement, and we deserve the consequences. That's life. Now, all we can do is rebuild, right?

That's the best ad integration I've ever seen 😄 I'm interested by this machine but was bummed out the BMS system is fully open, making the solution incompatible with PETG and TPU. I was thinking that color swapping might depend on the AMS to rotate thr spools to retract the filament. But then.. the problem doesn't actually exist?

Can the ams lite be bought separately for use with other printers? Get content thanks!

So, you didn't have any failed prints as you tested this printer? Did you have any clogs in testing this printer? Did you try to print the mouse in the kit?

So an updated Ender 2 pro?

Will the ams lite work with the p1p

Bambu is definitely not gonna be happy with you leaking the pictures of it already!!!😂

@andreas.grundler

8 ай бұрын

I don't think it's going to hurt them. Yesterday, Prusa released a video about a new alpha firmware for the Prusa Mini that improves the print speed. Since the Prusa Mini is the direct competitor, the leak helps to push Prusa out of the headlines a bit.

@okaywell

8 ай бұрын

he leaked his entire review...

@802Garage

8 ай бұрын

​@@andreas.grundlerIt literally makes no difference. It was a sub 24h leak hahaha.

What about the second printer, X1E, that also exists? (exists == registered as products in barcode databases; including spare items for it; just the same way this A1 Mini Combo is registered). Did you youtubers didn't get any info about that one? (that would be interesting if you are kept int dark)

@thenextlayer

8 ай бұрын

I don't know anything about it, but when I said "and then, when you guys release the X1E..." jokingly, everyone in the room looked at me like "you don't really expect us to answer that, do you?"

@arekx

8 ай бұрын

@@thenextlayer There are "Chamber Heater Unit" and "Chamber Heater Control Board" registered as products, so X1E maybe will have these. There is also "AMS Lite".

Does tpu work in the new ams?

I wonder if the AMS lite can be used with a regular X1 Carbon?

@jeremyglover5541

8 ай бұрын

Nope.

I love how it's designed for non technical people, but people are going to lose their minds when they have the refillable spools explode everywhere haha

@jeremyglover5541

8 ай бұрын

Yep, there is no escaping the fact that 3d printing is a technical hobby. Its not like all of a sudden the manufacturers of everything are going to release their cad files for everything. 3d printing is and always will be of limited use to people who cant 3d model.

@conorstewart2214

8 ай бұрын

@@jeremyglover5541 some people are and always will be closed minded.

@echo-hotel

8 ай бұрын

My 7 year old is modeling her own stuff and printing them on an X1C and AnkerMake M5. I don’t think knocking over the AMS Lite will make this safer for her.

@jeremyglover5541

8 ай бұрын

@@conorstewart2214 lol, hilarious. Why is it closed minded, because I dont agree with you?

@conorstewart2214

8 ай бұрын

@@jeremyglover5541 um no, "3D printing is and always will be of limited use to people who can't 3D model.", that is pretty closed minded.

Will it be possible to use the AMS Lite with the P1P/P1S/X1?

@conorstewart2214

8 ай бұрын

I wouldn’t have thought so, it seems to rely on the four input extruder of the A1 mini. They could release a way to use it with the AMS hub that lets you use 4 AMS units at once but you lose a lot of the benefits of the AMS lite and A1 then, since you would need to retract back past the AMS hub. It seems this will just be for the A1 unless they allow you to use an A1 hotend and extruder assembly on the P or X series.

woo now it comes!

@thenextlayer

8 ай бұрын

Soon™

Does Bambu STILL requires to sign up cloud once I want to update machine?

@MIN3D_reviews

8 ай бұрын

BTW, thanks for great video:)

Is it also usable classically with single filament without having the new ams support? Thank you

@802Garage

8 ай бұрын

Yes.

That closed software ecosystem is a big turn-off for me. And I agree that the purge waste is also an issue, but that's not much different than most multi-colour machines.

@fongsa1yuk

8 ай бұрын

I'd rather have a closed software ecosystem than an open source that's buggy or wont work.

@pileofstuff

8 ай бұрын

@@fongsa1yuk The problem I have had with closed ecosystems is that they have a bad history of end-of-lifeing their software (especially cloud connected), leaving me with hardware that can no longer be used.

@firewoodloki

8 ай бұрын

The closed system is a bummer. It seems like they are aiming to be the Apple in the 3D printing world. But they are stimulating the market with their products quite well. I wonder how Prusa will respond to the AMS, p1p, and now the A1.

Is the version with the clear covers actually available for sale? Pretty cool if so! Enjoyed your review. Bummer about the leak snafu. I hope it won’t be a big problem for you in the long term.

@anthonymessage6073

8 ай бұрын

Nope

@simpl3y

8 ай бұрын

clear covers is engineering version. Only version they are selling right now is white

@MikeKobb

8 ай бұрын

@@simpl3y Bummer. Thanks.

My wife & I just got our first P1S a few weeks ago ... we are planning to grab her 2 more P1S' & 1 X1C by years end. Personally I wasn't sure if I wanted an X1C or P1S but now ... I'm getting 2 of these & 1 X1C for myself. I'm looking forward to a manufacturer coming up with a machine that can take you "3D poop" , spaghetti or mistakes & turn it back into reusable filament!!

can the app let you start printing on multiple A1 minis at the same time or the other bambu printers? especially if you printing all the same items ..print farm action

@thenextlayer

6 ай бұрын

Yeah, but you have to select and start the prints one by one, you can't send it as a fleet for example.

How many of the motors can be used for the tunes? I hope the forthcoming sound app will be able to load MIDI files! None of the current printers are suitable for me, build size and AMS wastage are the biggest deal breakers for me!

Got in the game a few months ago with the P1P and I can totally see the A1 Mini taking up real-state on the other end of the desk. Never have I been so satisfied with a purchase. IMHO, if you have an interest in machining and CAD design, the initial investment in a Bambu Lab printer is definitely worth the cost. Thank you again for yet another well-informed video.

Hello, As a beginner in the world of 3D printing, I am seeking some informed advice. My top priority is print quality and the longevity of the printer, rather than printing speed. If you were to recommend a 3D printer for someone in my situation, which one would you choose among the following options: the BambouLab X1 Carbon, the Prusa Mk4, the Qidi Tech X-Max 3, or any other that you consider a superior option? I would greatly appreciate your insights and personal experiences to help me make an informed decision. By the way, I've been enjoying the clear, sharp, and intuitive videos on your KZread channel. Keep up the good work! Thank you in advance for your assistance!

Which option is better ender v3 se for 242 CAD or bambulab a1 mini for 389 CAD?

Nathan builds robots called it

I was thinking of buying a P1s, but with these updates on the A1 I'll wait until the P2s arrives, in the meantime I'm playing with another bedslinger!

can anyone explain how to print on the Bambu Handy app?

Not sure I'm a fan of the Apple like closed loop. Filament and all. I noted you said nothing about a slicer ability. So are you only able to pick a print that's available on their site? If that's the case, soon people will run out of things to print. No slicer perhaps? Can you design and make things?

Can the SUNLU S4 be fit for AMS lite? I mean 4 spools to print multicolor models at one time.

@conorstewart2214

8 ай бұрын

He showed that in the video.

@vincentwine8294

8 ай бұрын

@@conorstewart2214 Got it, thanks.

What does "come in time" mean in this case? (Concerning the larger X1 release) I'm not a native speaker.

@Ry-ep8nl

8 ай бұрын

It basically means that it will come eventually when it is ready / the time is right

As someone who's looking to get their first 3D printer eventually, this seems perfect!

HI love your videos and a lot of great info. No body has said what is the foot print of the printer and AMS . Table Size. thanks again and keep up the get work RL

Newbie question: (on iPhone) how do I find the "link in the description" or for that matter.... the description?

@802Garage

8 ай бұрын

Just below the title there is a "...more" button. KZread has obscured the description more over time. Really annoying.

Did you try printing TPU with the AMS Lite? If so, did it work?

@joelamaro4525

Ай бұрын

I watched a guy on a video yesterday and he said the mini printed TPU better than any of his other machines. But apparently they advise against using it through the AMS.

@cwills75

Ай бұрын

@@joelamaro4525 yeah, I posted this before I got my machine 7 months ago. Since then I've tried it a few times. AMS Lite works with very hard TPU (sometimes), but softer stuff is problematic. Hoping whatever AMS v2 Bambu comes out with is TPU compatible.

Now I understand. The A1 is an 8 bit video game as you can see from the screenshot. 😁

Could you please share a link with the small honeycomb raft on the wall behind you. (There is dragon on it) Thank you. :)

So sunlu filament dryer s4 is the pefect choice for A1 mini AMS! Exactly 4 spools!

Not what I expected but interesting :)

Hi im new to 3d printing and would like to know what the best software to use is.

@thenextlayer

8 ай бұрын

For slicing or designing? Slicing, I like OrcaSlicer and did a video about it. For design I like onshape for engineering stuff and blender for organic

So does this one work without the Bambu Cloud?

@chrisb9748

8 ай бұрын

I think it will rely on bambu cloud because of makerworld

I'd pre-order it right now if it was this price and had the same build volume as an Ender 3... I just see these smaller build volume printers as overly limiting.

Is this lite AMS compatible with the p1s?

@szalap1

8 ай бұрын

Nope, it is not :/. Somebody from reddit asked Bambu Lab directly and they confirmed this is only compatible with A1 (and maybe whatever lineup they will have in there).

Disappointed that you broke embargo and released early, especially to Patreon subscribers. That shoots a LOT of holes in your integrity.

@thenextlayer

8 ай бұрын

Hey, thanks for taking the time to share your feedback. I'm disappointed in myself. I consider myself an extremely honest person, and I don't know how I misjudged this. It was a huge lapse of judgement, and a huge communication lapse internally, and we are full of remorse. All we can do now is rebuild trust, little by little, by coming out with more great content, and doing better next time. Hope you'll stick around.

Thanks a lot, now i really don't know what to buy😂 great video, thanks

Excellent review! Awesome 3D printer!

Where do i find AMS Lite compatible PVA?

I just hope that they bring some more upgrade options to the P1P, like being able to use the AMS lite!

Man that S4 Filament Dryer looks awesome... too bad they won't ship the Kickstarter offer to my country :(

Mini printer for kids would be interesting

@thenextlayer

8 ай бұрын

Yes it would...

This overview is a little too positive for my taste and didn't really bother with the negatives.

@thenextlayer

8 ай бұрын

Fair feedback. I tried to mention that I didn’t like the poop or the appearance of the AMS, but I should’ve focused more on that or emphasized it more. Those are my two major criticisms as I told them directly to the Bambu team.

@bakaXY

8 ай бұрын

@@thenextlayer I thought of something more substantial like the general problems of cantilever printers for example

Hopefully they release a mod kit to put that faster (color wise) head and ams lite on the other printers. Swapping a nozzle breaks the tiny wires after a few swaps on the normal printers so that hotswap feature would be nice.

@echo-hotel

8 ай бұрын

It takes 45 seconds to change out a current nozzle. Though much longer for a child. Still not as child friendly as a X1C

@blaskotron

8 ай бұрын

@@echo-hotel faster I was referring to time saved on switching colors since the rolls don't have to rewind / load as far. But for swapping nozzles durability is a problem on X1C. I've had the plug on the board pop out and wires broken, even though I take my time. But now I've switched to hot swap nozzle where I'll never need to touch fragile parts again. Glad bambu is moving towards that too.

@masklessninja

8 ай бұрын

@@blaskotron yeah, the tiny wires make me not want to change nozzle size very often.

The footprint of this thing is insane. Not only is it the printer, the AMS is roughly the same overall footprint as well. Then if you want to capture the purge stuff you now need to put a bucket or box to collect all of that further increasing the footprint.

@echo-hotel

8 ай бұрын

Yeah. It’s huge! The AMS (lite?) Should have been an enclosed box, attachable to the printer. More like the AnkerMaje v6. Asians must think we have tons of free space. Making the bed larger wouldn’t have increased the overall dive by any significant percentage. Can you even attach a single roll anywhere?

@zachmo37

8 ай бұрын

@@echo-hotel there's a spool mount that attaches to the back of the z gantry so you can do a single spool yes

@jamesharris9894

8 ай бұрын

yeah and with something catch purge u wider than 2 x1c or 3 p1p side to side

Looking for something that can be portable to bring to events. We are RC enthusiasts that use 3D printing for parts and would really like that function on site. We have been hesitant to bring our P1S due to possibly damaging it in transit. Would this fit that bill?

@jeremyglover5541

8 ай бұрын

Only if what you print is able to be printed in PLA out in a windy field …

@syko2695

8 ай бұрын

If you're meeting anywhere that isn't a conference room/hall, probably not.

@r4yker442

8 ай бұрын

@@jeremyglover5541 V0.1/2 or Positron is a way to go, not *this* printer

@kichigaino

8 ай бұрын

I bring my P1P to work sometimes, which requires driving several miles of bumpy dirt road. When I set it up in the office, I just run the harmonics calibration and bed leveling and get to it. Haven’t had any issues yet.

@hobbyxtremerc

8 ай бұрын

@@kichigaino do you install the transport screws and all hardware?

The "Cricut crowd" strategy is an interesting one, whether this machine actually is able to break into the space Im not so sure. Time will tell I guess. I hope Bambu support is ready for it.

”Everyone” can mean a lot of different things….: * “Everyone”…can afford it * “Everyone”…can use it with “any printer” * “Everyone”…can use it without prior 3D-printing knowledge * Everyone can access it A1… well My best guess is it’s a product aimed for schools (children), but with capabilities never seen before, eg multicolor printing and the features of the Bambu cloud services. But I was really hoping for a CMYK blender.. 🙈

@kenspaceman3938

8 ай бұрын

A color blender would be great.

I'm thinking a Prusa mini style multi colour printer

@SanderMakes

8 ай бұрын

Given the recent leak, you're basically spot on!

@DunRiteCreations

8 ай бұрын

​@@SanderMakesI've been saying it's a cheap bed slinger since BL said it's multi colour for everyone. There's things I do and don't like about this, but I'll probably get one for my kids so they can learn on something easy

They no longer include the extra kit to print. I just got an a1 mini and it didn't have one included

my only issue is the build size I make cosplay on my printers and this may be fast but not something I could use I already have a smaller printer and an enclosed one so can't say im getting this despite it being amazing looking

Would be nice to get the swatches for free with the original AMS. The hotend swap is also something that needs to come to the P1/X1 series. An existing nozzle swap is annoying at best, and even changing the entire hotend assembly on the X1/P1 requires screws and fiddling with wiring connectors. Nice that this one is so simple.

Now we need the AMS LITE to fit as extra AMS to the X1C, and a kit to upgrade the AMC to work like the LITE one without the need to fully extract the filaments all the way back it looks like the MAS lite improves of the AMS of the X1C or P1S

@conorstewart2214

8 ай бұрын

The AMS lite in most ways does not improve on the regular AMS. To use it with an X1 or P1 then it would need to use the AMS hub which limits the usefulness of it not having to retract the filament all the way, and that is if bambu even allows that. Also if possible then like the A1 mini you would only be able to use 1 AMS with a printer compared to the 4 that you can with the original AMS. Then you have the dry box capability of the original AMS. The only advantages of the AMS lite is that it supports more types of spool and it doesnt retract all the way, but all it would take to make a multiple original AMS setup not have to retract all the way is a firmware upgrade and then you have eliminated one of the main advantages of the AMS lite. The not retracting all the way thing would never work properly with one of their other printers due to the hotend differences, the other printers only have a single tube to the hotend so even if it was possible then it would still have to retract as far back as the AMS hub.

The Cricut market is 100% correct, cloud slicers, abstracting the tuning and touch-less design. Making it able to easily troubleshoot is really key to this, everything from greasy fingers on the build sheet to tangled spools.

wow, you went to shenzhen to have an interview to get the 1st hand info finally. really glad to hear that. btw, the model in 3:31 is from another brand- flashforge

If they can put a simple touch screen on this low cost printer, they can put ons on the P1 series. I mean, come on. The P1Touch screen is what, eight bucks?

Great video, shared on my group and Socials.

I already own two 3D printers (an Elegoo Neptune 3 and a Neptune 4 pro) but i am really thinking abut buying a third one after i have seen this awesome little machine or more likely selling my Neptune 3 and replacing it with an A1

Now the a1 looks incredible for first time users but i do wanna se a bambu lab version of the Voron 0

Not sure if you are already aware, but it looks like Bambulabs killed your affiliate link.

@thenextlayer

8 ай бұрын

Correct.

Wow, I am so glad Sunlu made this video possible and paid Bambu for this 😀

@geoffhowells4165

8 ай бұрын

Maybe Sunlu is Bambu :/

@dejedejsson

8 ай бұрын

@@geoffhowells4165 It becomes more difficult to take reviews seriously from KZreadr influences when half the gang are invited on bribery trips to China, don't come and say that you are objective after such a trip!

@explodingfist

8 ай бұрын

@@geoffhowells4165 Sunlu supplies Bambu with their filament, so they are at least a partner, so it's not surprise he is shilling their product for them.

@Nevax_

8 ай бұрын

@@geoffhowells4165 Sunlu is one of the manufacturers of bamboo filaments.

@etech9805

8 ай бұрын

They are different companies for sure.@@geoffhowells4165

Would it be too much to ask for pictures of the A1's Poop Kicker? I have an idea for a poop collector, but need dimensions of the end of the arm as well as how high it is from the table. Thank you in advance!

I think the foot print of this printer with the new AMS is a real detractor for me. This "mini" with AMS looks like it takes up as much space as my MK4 or my X1 with its AMS.

@jeremyglover5541

8 ай бұрын

Yep and imagine if you realised you get better prints when your filament isnt wet and have to put it in an enclosure …

@lawells3

8 ай бұрын

@@jeremyglover5541 Or the fact the second thing they will need to print is something to catch all the purge material for those multi-color prints.

@eaman11

8 ай бұрын

Agreed, just the small printer by itself is interesting, it's a well designed desktop fast-prototype machine. With the AMS is a total mess.

@jeremyglover5541

8 ай бұрын

@@lawells3 also interesting and not mentioned here, is the fact with this machine, the slicing takes place in the cloud, you cant even use sneakernet anymore and I guess you cant use orca. I think it makes it plain that people and their IP are the product with these machines.

From the 1:20 to 1:40 😂Epic Fail!!! Thanks for the video! Wish to know more comparación análisis with the ams of the P’s and X’s

Why was Bugatti said along side Tesla when giving the comparison for the change from high end specialty products to a mass market approach? 😅

@thenextlayer

8 ай бұрын

They used to lose money on every Veyron, just to get the name out there. I suspect Bambu did this with the X1 Kickstarter, too.

A1 mini, X1E and AMS lite?

@thenextlayer

8 ай бұрын

I guess we'll seeeee...

@Sportdue55

8 ай бұрын

Don’t need to wait. His leaks are on Twitter and tiktok

@MIN3D_reviews

8 ай бұрын

Holy cow!

Was really hoping they'd figured out the poop quantity issue.

Can you buy it without the AMS? If not then I think they've missed a trick. I think there are lot of people who want to quickly and easily print functional parts and have no need for multi-colour printing.

@thenextlayer

8 ай бұрын

Not yet, but soon, I think so.

@nickgilbert1264

8 ай бұрын

@@thenextlayer Please ask them if they can do this :) Otherwise they will still lose lots of business to people who want a compact printer. I just want something less irritating and faster than my Ender 3 but this would take up far too much room. Tempted by the P1S though.

Not trying to be a hater, but this feels much more like a sponsored commercial than a proper critic's review. Would've been nice to have a proper time comparison between p1p and this when doing the exact same color print. Maybe some mentioned to the poop or the tremendous noise it makes when cutting filament. I don't know... Some negative points maybe? Somehow this review has little added value over reading the spec sheet directly from bamboo lab's website. Please don't sell out or try to be on the good edge of brands for the sake of it. We want true honesty!

@joelamaro4525

Ай бұрын

His comments and review aligns with most reviews I’ve watched on this printer and they have been many.

Can't wait for the A1 not-mini!

I am loving my X1 carbon and P1P (now with xtouch), but the quiet and full feature of this printer even for us experienced is enticing and that is why one is on the way to me which will again have a place in my office (where the P1P and X1 got banished to my shop. Now I can prototype and watch next to me and then when I need advanced materials, go to X1. Next, I predict that the next P series will have color display and their will be an XL version to satisfy the existing customers or advanced users. For me, I want to design/print and not build as I did on my first 5 printers with Creality.

Tachles when an enclosed Bambu Lab with All thèse features under 500$ ?

They should offer that screen for P1S as well.

Successors?! I want that hot swappable nozzle on my existing X1C! Please make it happen, Bambu people! 🙏