Thanks for watching! Just a heads up, since I recorded this video, Creality informed me that they're releasing the K2 Plus on June 5th at 9AM, and they're giving the first 200 people ***50% OFF*** (and the next 500 people 40% off, which is still pretty damn good). Claim yours here: jle.vi/k2plus

@jacobjames8137

13 күн бұрын

9am in what time zone?

@FounderOf4

13 күн бұрын

US EST

@techhead-bedhead

13 күн бұрын

i have to say it here dont buy the eddy sensor hilariously unreliable

@DunRiteCreations

11 күн бұрын

They actually ended up doing two batches of 200 at 50% off. Was lucky enough to snag one this morning!

But... but... I did watch the SV08 upgrade video... (awkwardly standing alone in a massive room)

@mattwhitepaintjob4925

13 күн бұрын

I did as well so you're not alone.

@DunRiteCreations

13 күн бұрын

Same here. And impatiently waiting for mine to arrive

@III-zy5jf

13 күн бұрын

Same. I also ordered the Eddy. Now I'm having second thoughts. It doesn't do Z-offset or Z-stop, which won't prevent a crash. It could create a mesh with spikes. I don't know if I'll have bobby time to fiddle with it and Klipper.

@Jzawolkow

13 күн бұрын

He is using the same guilt inspiring rhetoric that my mother used on me my entire life. P.S. call your Mothers!

@georgskleinewerkstatt8678

10 күн бұрын

Me too...

Okay, the hammock scene was pretty funny!!!

Great Video! Always love watching and learning.

I've had the origional Sovol dual spool filament drier for some time, also used as the spool holder for my IDEX. The only issue I've run into is it's not wide enough for some brands of 1kg spools. Priline spools is one that comes to mind. If I load 2 Priline spools the sides rub causing one spool to unwind inside when they other is being pulled out. Wish they would make it about 10mm wider for more room, don't seem to be a standard for spool width. Aside from that it's been a great addition to my printer and really improved my prints.

Excellent video. Is there any news from Bambu Lab about a new version of the X1 carbon or a larger format printer?

Love the channel. Keep producing/printing and I’ll keep watching/viewing

This is a great video for a series. Please do

Please show the glasslike resin! I’d really like to see the quality both “hot off the printer” as well as post-processing.

The keyboard button thing is something I wish I had on my printers. 8 or so buttons to start certain features I use all the time would be awesome! The kid friendly printers are awesome to see people covering too. My daughter is 3, and loves to watch the printers, and remove items from cooled build plates. She knows not to touch anything because it’s very hot. This mass product update video is awesome, and I hope you make more! I was one of the few to watch the sv08 upgrade video. 😂

That filament subscription thing is GENIUS!

Nice to see a video that didnt end in a shambles. More of this stuff please

@thenextlayer

13 күн бұрын

LOL I know, right? I bit off way too much the last few months, and need to scale back from project videos and do info videos once in a while.

This was a super cool video. I think every quarter or 6 months would be perfect.

I appreciate this type of information video, I don't always see the new products coming out and want to stay updated! I like many others I'm sure want more options when it comes to multicolor printing! Love my Bambu Lab printers but I am very open to other printers with less waste. I hope there will be more AI interpretation for the filament loaded to tailor the purge amounts to the actual material being used! Or at least a transparency test sensor of some sort. He who gets that right, gets my money frankly. Thanks for the video, have a great week all!

that stinger project looks amazing. id love to see a build video. id also love to see how reliable it is for print farms. you shold do videos like this once a month. maybe a "This month in 3d Printing" series talking about new releases and upcoming stuff like this. good work! cant wait to hear more about the filament grinder!

@thenextlayer

12 күн бұрын

Once a month is a LOT considering I put out only 3-4 videos a month... I don't know if I want 25-33% of my channel to be 3D printing news instead of projects. BUT... I will look into doing one every quarter :)

Am I the only one who didn’t mind the SV08 video? Haha. It certainly got everyone talking!

@1fareast14

13 күн бұрын

Yeah, pretty overhated. I'd have split it into very short parts if it meant a completed build and more time dedicated to the design of community mods for that printer

Omg the hammock shot hahaha. Too good!

@thenextlayer

13 күн бұрын

Haha thanks, glad someone appreciated it

LH Stinger is an absolute beast. Been following it for a little while. Didn't know about the kit

@thenextlayer

13 күн бұрын

It's expensive, but so are Vorons.

Protopasta also has a filament subscription

The new hybrid vcore is actually not an AWD printer with additional A and B motors. The two additional ones are just for the Y axis. They are basically cartesian.

Youre amazing man! Super cool video!

@thenextlayer

12 күн бұрын

Thanks a ton!

G'day from Downunder.....id definitly like a 1/4ly outlook on new and or upcoming products for the 3d printing community.....i really like the fact you got me interested in the BTT Panda Touch..big cheers to you from a shut-in here in Australia

@thenextlayer

12 күн бұрын

Thanks mate. I'm on it! However... isn't it pronounced downunda?

@genemaster74

11 күн бұрын

@@thenextlayer yeah m8...only if ya an Aussie bogan.😂....us proper Aussies use Decent English😝

why wouldnt i have watched that video.... watching everything 👀 xD keep it up mate youre doing such a great job

As I sit here and binge watch your videos, now I want an up to date 3D Printer. I’d like to print my own replacement parts for some my equipment

@thenextlayer

12 күн бұрын

DOO ITTTT

Well I just put a reservation down for the rat rig 500 following this clip. Been looking for a large print bed option

Polymaker...for 30 bucks you get an entire dryer. Why spend it on an empty box?

Could you please tell me if the ace pro is compatible with the anycubic kobra 2 pro or if it will be Thanks

@thenextlayer

13 күн бұрын

Not yet, but hopefully soon

Great video, waiting for innovations from Bambu and Parusa.

@thenextlayer

12 күн бұрын

Aren't we all?

Kudos, excellent format, 3D printing news, I'd suggest you do this at least monthly if you can

@thenextlayer

13 күн бұрын

MONTHLY?! That’s a lot. It was a ton of work to wrangle suppliers! But I think I could do it quarterly. Maybe more…

@emanuelesparacca6322

13 күн бұрын

@@thenextlayer I loved it, no one is making 3D printing news yet, seriously it can become a big thing, congrats

LH stinger is probably the coolest bed slinger developped by a great engineer! RatRig came also with the engineering ! BTT Coil Eddy looks great too !

@BeefIngot

13 күн бұрын

The problem is imagine printing a long slim item vertically. Immediately the problem becomes evident even if it doesnt just fail. If the part has to move, the part has to move. Outside of printing speed venchies and trinkets moving the potentially heavy part will be slower and will lead to lower quality.

@6sixxdance

12 күн бұрын

@@BeefIngot you can slow down...... On tall thin parts. Usually, these parts won't have a good level of integrity either. The point was "it's the nicest built for a bed slinger". Cross gantry is the way to go for a higher purpose we know.

@BeefIngot

12 күн бұрын

@@6sixxdance You can slow down, but the point is, a bed slinger simply cannot be as fast as other options. Its an important point to make because many people incorrectly have said otherwise because they see some fancy speed boat test. I just want to make it clear, because that pervasive myth would let manufacturers go back to the crappy ender 3 clones of yonder.

@6sixxdance

12 күн бұрын

​@@BeefIngot This is unrelated to what I commented... I said it is the coolest bed slinger, nothing else.

Need to cover Wham Bam's fire extinguishing system for FDM printers called The Cloud. Great idea. Discussed it with Wham Bam's owner at the Rocky Mtn Rep Rap Festival. A much needed safety idea for protecting your house / building. He told me about all of the testing they did before releasing the product, and I was impressed. Like their other products, they did put a lot of work into the development.

FLEXING on em with the hair twirl!

@thenextlayer

13 күн бұрын

Hahaha! Wait till you see next weeks video though…

My son and I are happy with the bambu mini, we are learning. But I am interested in upgrading for myself, but bambu won't say what is next and when. Should I wait and see, or go ahead and buy the older p1p or carbon.

@MrBooth1974

13 күн бұрын

Bambu just did a price drop announcement… so I’m betting we will hear about something new by early July… and a fourth quarter release date, in time for Xmass

I want to say your channel is entertaining and informative. I am sorry you’re dealing with hate from people over things you can’t control. And you appear to handle it well. Ignoring comments is something I might recommend to you if they get to you too much.

Very interested in the LH Slinger!!! Subscribed for it

I have order the SV08 and I'm waiting, waiting waiting for it to arrive.

Yes we want to see the clear Sun Lu resin.

First time this early ever, love the vid too!!

to be honest pretty great kexcelled is using bambu spool dimensions because if every manufacturer adapts we can use every refill with every spool already was hoping for this so hope it becomes reality

I want the Micronics SLS 😎

@robertgcode965

13 күн бұрын

YES! I was about to say the same.

Do you plan on reviewing the FLSun S1? I'm very interested in it but would love to hear your thoughts!

At this point, what really matters for me is if these companies make their tech accessible and open source.

@_Richard_F___

11 күн бұрын

Buy a different printer then . Or make your own

@_DROM_

11 күн бұрын

@@_Richard_F___ I'm guessing your comment was misplaced?

In addition to the LDO Positron V3.2, don't forget the LEMONTRON! Open source, built in power supply, unibody design, integrated extruder, and relentless cost shaving!!!!

E3Ds HF ObX Bambu Hotend is in stock, ordered mine sunday and received it today

@thenextlayer

13 күн бұрын

NICE! They were out of stock for a WHILE, and I think the Revo HF Obxidian was in and out for a while.

Great video. Re usable spools should have been around 5 years ago, such a waste of plastic. Would much rather be buying refills. Integreate some bearings into the reusable spool would be cool!

Im REALLY looking at the P1S or A1 for the Bambu sale tomorrow. Now I have to research this K2 Plus.... Such a hard decision

@thenextlayer

13 күн бұрын

Truth... tough choice.

@DunRiteCreations

13 күн бұрын

Man this news about the k2 plus has made me kinda regret my SV08 pre order. Sounds like this might be cheaper if I can snag it at 50% off. Fuck I might piss off the wife and order it too

@EngineeringAddiction

12 күн бұрын

Bambu lab is the way to go

@DunRiteCreations

12 күн бұрын

​@@EngineeringAddictionYes and no. They aren't the end all be all like many parrot but they are great printers. They made huge waves in the market with their launch but very comparable and even some better printers have been released since then. And most of them are even cheaper as well. I love my three P1S combos but I also have an SV08 on the way and I'm gonna try to snag a K2 plus combo tomorrow morning at the half off pre-order price. Even with Bambu's lowest prices to date with the current sale going on, the half off the K2 is actually like $20 CAD (plus I think $65 CAD for shipping with the Bambu so $85 CAD total price difference) cheaper than the P1S combo, but is 350³, and has a heated chamber too, plus all the other comparable features of the Bambu if you look at them side by side

Printed solid does a filament subscription too.

That was an upsetting DeWalt comment 👊😄

You missed 1 SUPER MEGA release....The MONSTEROUS, INCREDIBLE, MASSIVE......Tinymaker resin printer. Its going to be Epic!

What an amazing time to be in 3D printing, thanks for the research, I hope I win the k2 plus lottery tomorrow 😫

@PrintedSolid has had the Jessie Box for several years now and it was $34.95 when Dave started it. It is 2 random spools a month.

That Sunlu Glass resin ... Im very very VERY intrested.

I actually liked the SV08 upgrade video

There was the profi box with filamentum that had a monthly subscription of 2kg filament and a "surprise" gift. However, they were very inconsistent with sending out the boxes and the company eventually went out of buisness.

We've got Voron in red and ratrig in green why don't we have an open source blue printer?

Jon, filament subscriptions are definitely a thing but it's usually through Amazon fulfillment. Just wait for a filament to go on sale and there's usually further savings if you "Subscribe & Save", that's what Amazon calls it. I'm not sure if this is available in Israel but it's a thing here in the States.

@thenextlayer

13 күн бұрын

Oh that's a good point, hadn't thought of Amazon.

Should I buy now or wait for something better just down the road? Want to get FDM printer, at least helmet size.

Really interested to see what Creality do with their filiaments that they were going to redo to include RFID chips

@thenextlayer

13 күн бұрын

I'm waiting for someone to just make an AMS that reads ALL the RFIDs... Prusament, Bambu, AnyCubic...

@alchemist6395

13 күн бұрын

@@thenextlayer one can only dream!

Got home and opened the box and what do I see a brand new MONOPRICE select mini 3D v2. I did a little research on it and find that it is a little over ten years old. I did the trial printout of the g code cat program and it works just fine😊 now I just need a computer or maybe because as I read further in the manual I see it has WiFi capability and iso and android compatible 😂

Tangled filament offers a filament subscription

Slant 3d’s tangled filament. Does subscription

Profi box use to do filament subscription but they went out of business and didn’t tell anyone.

Just ordered Sovol's old 2 spool dryer, got a good deal on it, only $39 on a flash sale through Amazon, It's fairly dry in a my basement domicile that I live and tinker from, so I haven't been worrying about moisture too much, But, I have some PETG coming, and should probably have a dryer on hand just in case. And at this price, it beats out a cheap food dehydrator that I'd only get a single spool into anyway, provided the price isn't an indicator of reliability. And in the off chance someone still hasn't heard, Bambu doing an anniversary sale starting tomorrow, A1 Mini for $199 an absolute steal. I got mine a little over a week ago, and their offering to refund to a giftcard the difference on printers people bought and received on or after may 20th, and ordered before June 5th. So, those of us who bought a printer right before they decided to drop a monster sale on us. Just wish they were also dishing out for other things bought that are also going on sale. :/ woulda held off on my last filament order.

@thenextlayer

13 күн бұрын

The old Sovol dryer isn’t very good to be honest. Also good tip about the Bambu sale!

@RedMageGaming

13 күн бұрын

@@thenextlayer Not expecting it to be amazing honestly, if it can keep a couple of spools from getting waterlogged without burning the house down, good enough. I don't live in a super humid area, so I am banking on it just working well enough to maintain a couple spools as their being used. And if it doesn't work out, amazon is usually pretty good about returns. If it really sucks I'll just save up for that 4 spool Sunlu one that seems to be pretty well liked. [not sure where I'll put it, but I'll cross that bridge when I get to it lol]

When companies copy Apexmaker X1 and make it more reliable? This is the only thing I want to know :D

I want a beginner friendly one but easy to use. ❤ 3d printer with resin

@Noname-gz1gx

13 күн бұрын

At what price?

Man, duck creality. They purposely launched the smaller versions k1 so they can milk it.... the could've launched the 350mm just fine when they did instead of the smaller one.

I feel like ratrig 4 will be like a raspberry4 during covid. Sure listing exist but the item is a phantom. Then by the time you can get it 5 will be out.

What about Bambu Labs? Werent they supposed to release a new product this year?

@thenextlayer

13 күн бұрын

Unfortunately I no longer have a relationship with them. Hopefully one day we'll rebuild!

@Noname-gz1gx

13 күн бұрын

​@@thenextlayer😅

Don't all spool refill systems descend from Richard Horne's Masterspool, which was deliberately intended as an industrywide open standard? "How has no company thought of this" regarding filament subscription service... uhm probably because it's not a very useful idea? You don't need a subscription for filament and you don't need a subscription for inkjet ink, you just buy them as you go depending on consumption. And if that's too much ongoing effort, then just buy more at once and leave some sealed up. Even shaver blade subscriptions though more justifiable since people have sort of a constant consumption of them, are more predatory than actually useful.

How recycling shopping bags in filaments ❤❤❤❤❤❤❤

@thenextlayer

12 күн бұрын

Shopping bags are Nylon, I believe, and would make quite bad filament!

So, only featuring large, established companies, and not bleeding edge products like the beacon contact or chube hotend

BTT releases some great ideas but I feel like sometimes the execution lacks a bit, Panda lights are amazing, eventhough you have can't run the normal lights. However the panda jet still has SLS powder in the inner parts and panda touch and the P1S camera can't be used at the same time which is a big problem for me so its catching dust until they both work

@looxonline

12 күн бұрын

What do you mean about the P1S camera not being able to be used with the PT at the same time? Like does your PT just stop working when your turn on the cam? Also, there were some early Panda Jets with a bit of SLS powder but it just blew out on first use and that was taken up with the supplier so all units should be free from it now.

@xIsouLcruSHca

12 күн бұрын

@@looxonline I think as long as the panda touch is plugged in you can't connect to the camera, the panda touch does not stop working but you just can't use the camera at all, as for the panda jet, I got the bad first batch used a compressor to blow out the dust but still got dust while printing so maybe I'll try it again in the future when I want to do some printing with the fast and ludicrous mode but for now I'm done with the hassle

@looxonline

11 күн бұрын

@@xIsouLcruSHca That is not right. The camera and the touch are completely unrelated. The touch uses the USB port for power but that port has no data connection so the touch can't really affect data. It may be that your AP board in the P1S has a fault that causes it to have a problem when there is power drain over the USB port. To test this theory you could connect the panda touch using an external, 2A USB supply and see if your camera comes back. There is no way otherwise that the panda touch could ever affect the camera at all.

It is interesting to see how shamelessly the other companies are copying Bambu. Specifically the AMS.

Great video, though I suspect that's the DeWalt sponsorship killed :D Creality K2 - right product, wrong price (I say that as I Creality owner) Sovol SV08 - Great to see the upgrades and you could buy that and an enclosure for less than the K2? But please Sovol, could you make a tool changer material / colour changer rather than a many-to-one hot-end? The material waste for an AMS style is such a shame

@thenextlayer

13 күн бұрын

Like I said... who wants DeWalt tools? ;)

Don't know why I thought this was funny but every video is another layer to your channel so I just though, Oh boy another layer when this got recommended to me today

Best #ad ever...lol

The k2 plus has a price of 1499, launched later this month

@MrBooth1974

13 күн бұрын

Is that the official price ? I haven’t seen it yet…

You like blue tools more then yellow?

Is that a PrusaTron?

@thenextlayer

13 күн бұрын

They made me an orange one because that’s my jam

I was disappointed there was no updates from Flsun

man I've never been this early to a video 🤣

@thenextlayer

13 күн бұрын

Legend!

@daddysausage

13 күн бұрын

Same bro same

2 467 prusametres?

@thenextlayer

13 күн бұрын

Word

👍

No more contact with Bambu Lab? :( They are really missing something.

@thenextlayer

13 күн бұрын

Hopefully that's a bridge I'll be able to rebuild, but so far, still in the doghouse.

@noahkatz9616

13 күн бұрын

@@thenextlayer Bummer; what happened?

Creality literally copied bambu lab in all ways on the creality filament system which sounds oh too similar to the automatic material system 😂

@thenextlayer

8 күн бұрын

Maybe but it also has a filament dryer

The slobbering over Sovol is a bit over the top. Their customer service is pure crap…you don’t mention that. My SV07 Plus purchased in late February, went down in April and Sovol was immediately notified. This is June. 10 days ago Sovol told me they were sending a power supply. As of today, USPS is still waiting for the package. Absolutely nothing has happened. I’m sure they take great care of you, but that means little to the rest of us. If you look around, it doesn’t take long to find people in my position… Screwed and at the mercy of people who don’t care. I would have loved to finish the video, but if I had to listen to any more slobbering over Sovol, I was going to puke.

@thenextlayer

12 күн бұрын

Oddly I’ve been told the exact opposite, too…?

@miker6484

12 күн бұрын

@@thenextlayer I would be remiss if I claimed that nobody ever had a good experience with Sovol. Exactly like you are being remiss, claiming that they have such great quality and reliability… Without any disclaimer. A machine that fails within 60 days of purchase obviously disproves your statement about great reliability. if your comments and reviews are going to be useful to the public, they need to reflect both sides of the equation… Not just the fluff you’ve been spewing in this video. I’m not basing my comments on what I have been told… I’m basing them on personal experience. Makes a considerable difference. When a company has no sense of urgency to care for their products under warranty, you should be honest and say so. I realized that would cut into your pocketbook, so I’m sure that won’t happen. This is a reality, not some thing heard: How many days does it take this reliable company to get a part to the damn carrier? Shipping Label Created, USPS Awaiting Item GRAND PRAIRIE, TX 75050 May 25, 2024, 12:03 pm

@thenextlayer

Күн бұрын

Hi Mike, I just saw your email (I only check email twice a week), and I've forwarded it to Sovol's general manager. They've had some staffing changes in the last month, and I think maybe your order fell through the cracks, however, I'm going to bring this to their attention and try to get an explanation as to what's going on over there before I continue promoting their products. Thanks for bringing this to my attention

S1 anybody?

I'll pass on the Creality junk.

Idk what to say (I usually don't get to the video this early).

@thenextlayer

13 күн бұрын

Well done!

I love your videos. Greetings from Gaza

@thenextlayer

13 күн бұрын

Thanks habibi. Stay safe out there. Hope the war comes to an end soon. Love from Israel.

its i 2 c

TradRack 14 > ERCF V2

@thenextlayer

13 күн бұрын

This is the first I'm hearing of it... Need to check it out.

@DunRiteCreations

13 күн бұрын

@@thenextlayer would be awesome if you did a video on it. I only found out about it a couple weeks ago myself, and from what I've seen, it's quicker and more reliable than the ERCF, about the same price (or even a little cheaper), has all the seam features (buffer, filament cutter, etc), and does 14 filaments

Why do you change the title of your videos so often? I see it come up as one title and maybe 3-4 hours later it's another?

@uskeeze2131

12 күн бұрын

It’s to see what works best with the algorithm.

How many of these manufactuers paid you for these reviews? Or, provided free products?

@thenextlayer

12 күн бұрын

None of them paid me except Sovol (as I stated), but they do all send me free products. That kind of goes without saying, I’m not going to buy every new product that comes out just to film 3 seconds of it.

first

i keep watching your videos. your videos are awesome i fulfill my 3d printer desire by watching your videos. because i don't have any 3d printer i don't have the facility and money to buy a 3d printer can you help me can you buy me a 3d printer?😢😢

1499

Just review products that are available, don’t speculate, there is no point

No one watched or enjoyed the sv08 upgrade video because it was hacked lazy and thrown together rushed video

@thenextlayer

13 күн бұрын

That’s absolutely true.

@MikeKasprzak

13 күн бұрын

This comment is rude and wrong. 👎

@elliotknight7531

13 күн бұрын

@MikeKasprzak you must have not seen the video.... Dremeled the hot end cover, fried the tool head board from being careless and literally in a hurry, glued the eddy sensor on. Come on. pure hack job.

@Drivenapollo

13 күн бұрын

I personally enjoyed it. Seeing someone have trouble with something reminds me I’m not the only one, and that they too are learning. I don’t have a company rep to speak to get me parts, but I do enjoy seeing ideas that are not cookie cutter. For some, breaking stuff, and fixing it is part of the fun. 😊

@KanielD

13 күн бұрын

@@MikeKasprzakthis comment was positive feedback.

Anti Dewalt? *reaches for unsubscribe* ;)