Dowload: izzylaif.com/go.php?url=https... This device cannot start Code 10 Intel Ethernet adapter exclamation mark
Жүктеу.....
Пікірлер: 51
@CraigFlanagan19753 ай бұрын
Thank you, this worked a treat. Also established my cable was also a issue but that was a easy fix after this.
@NBordakov4 ай бұрын
Omg this long story about intel is good on both languages Izzy speaks
@dmitriytessman26674 ай бұрын
Гутен морген Изя!
@taps96852 ай бұрын
I'm working with an Intel(R) Ethernet Controller (3) I225-V and I've installed the latest PREBOOT.zip. Whenever I open cmd as admin to change the directory to the installed Winx64 folder to install the .bat file it mentions that it aborted the installation because the driver already exists yet it's still showing code 10 even after system restart. Following up with bootutilw64e.exe -nic=1 -defcfg and/or -all -defcfg yeilds: 1 (Cannot initialize adapter) is there anything else I can try to do?
@izzylie
Ай бұрын
try deleting the controller from device manager first, then let it rescan the devices
@k0ala166
Ай бұрын
@@izzylie didnt worked for me i tried to rescan for device but still cannot initialize adapter. Idk im not uised to work with cmd but im trying
@deadfn6203Ай бұрын
im lost, i feel you need to elaborate way more for me to get a better understanding in command prompt, like what do i need to type?, i moved those installs to another folder and now im lost
@izzylie
Ай бұрын
study some basic computer literacy, i.e. filesystem and command prompt. after you get some knowledge the instructions will be crystal clear
@rafikakbar83632 ай бұрын
ini kak wulan pernah mampir di channel ryan yg multilingual
@222sp33d25 күн бұрын
thank you for your video. I navigated all of your steps successfully, with no errors, and the fix is not working. I have also now tried uninstalling the ethernet adapter, and following up with scanning for hardware changes. I tried doing this both before and after rebooting, with no success. I have an intel i219-LM ethernet adapter. do you have any advice? perhaps I could obtain somewhere a working firmware image for this network adaptor?
@izzylie
25 күн бұрын
you may want to boot from an ubuntu live usb and try the same under linux
@222sp33d
25 күн бұрын
@@izzylie thank you for your suggestion. I have not used ubuntu before, is it an entirely new operating system to replace windows? how is it relevant here specifically?
@izzylie
25 күн бұрын
I specifically said "live usb". You just boot ubuntu installation media in "try" mode. it will not install anything or replace your OS, however you can use the linux version of the same intel utility to try fix your networking. and I think intel also provides a bootable media to do the same. the idea is to remove windows out of equation
@rafikakbar83634 ай бұрын
I get a "Setting PXE EEPROM words back to defaults on NIC 1...error Unable to write default configuration to EEPROM" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
@izzylie
4 ай бұрын
try removing it from device manager and then search for hardware changes
@rafikakbar8363
4 ай бұрын
@@izzylie done it bunch of times already, searched online and found someone says that it has to do with secure boot, tried disabling and re-enabling it back and forth but still not working
@izzylie
4 ай бұрын
are you sure you run cmd from admin though?
@rafikakbar8363
4 ай бұрын
@@izzylie yes i did
@izzylie
4 ай бұрын
may be you would try booting from say a live Ubuntu stick and do the same from there. there's a linux tool next to windows one on intel website
@hoascoivan39423 ай бұрын
Can you help me to fix mine
@user-hc5oi2ts3qАй бұрын
What do i do if it says ERROR: PXE is not flashed on port 1
@izzylie
Ай бұрын
try to remove the card from device manager and repeat the steps
@rlbigfish4 ай бұрын
I get a "cannot initialize adapter" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
@rlbigfish
4 ай бұрын
Actually, after that I uninstalled the device from Device Manager, used Scan for New Hardware, ran the bootutilw64e.exe command again and it worked like a charm. Rebooted, plugged the ethernet cable back in and bam, worked. You're a life saver!
@Marwan-oj3lc
4 ай бұрын
I get the cannot initialize adapter
@Marwan-oj3lc
4 ай бұрын
@@rlbigfishwhen i uninstall it from device manager and scan for hardware it gives cannot initialize also
@adamkadmon6339
2 ай бұрын
@@Marwan-oj3lc same for me: "cannot initialize adapter" and uninstalling and rescanning didn't help
@Marwan-oj3lc
2 ай бұрын
@@adamkadmon6339 I didn’t find any solution to it
@splat2glitcherАй бұрын
it says cannot initialize adapter yes ive tried uninstalling from device manager and it is an admin cmd prompt
@izzylie
Ай бұрын
which adapter is that
@splat2glitcher
Ай бұрын
@@izzylie i218-v from asus z97-ar
@izzylie
Ай бұрын
I would try doing exactly the same thing, but from a linux live usb.
@3coq3904 ай бұрын
nice vid
@stanislemovsky55906 күн бұрын
Did it, the INF installed successfully, but then I got "Cannot initialize adapter" when executing Bootutilw64e ... It's definitely not physically broken, it worked fine until I made a clean reinstall of Windows.
@izzylie
6 күн бұрын
is the cable unplugged?
@stanislemovsky5590
3 күн бұрын
@@izzylie Hey, thanks for the reply. It wasn't, but I solved the problem in a different way. It seems the newest build of the driver (29.2.1) was faulty. As soon as I went back to 28.3 (the latest of the 28.x builds), it worked fine.
@ismailazeez11242 ай бұрын
Not working for me. It set NIC 1 back to default but problem persists
@izzylie
2 ай бұрын
what is your card model
@ismailazeez1124
2 ай бұрын
I don't know how to check the model but it Intel(R) Ethernet Connection I219-LM
@izzylie
2 ай бұрын
try deleting in device manager and refreshing it
@hoascoivan39423 ай бұрын
Not working for me Hp probook 640 g2 l219-Lm error 10
@izzylie
3 ай бұрын
the solution is the same. you may want to remove it from device manager first
@teanazheng3 ай бұрын
ERROR: PXE is not flashed on port 1
@izzylie
3 ай бұрын
what is your adapter model
@rachserg4 ай бұрын
Учебник в интернет))
@moises84773 ай бұрын
Promo*SM
@MarioHernandez-zg9fr3 ай бұрын
not working 👎👎👎👎👎👎👎👎👎👎
@izzylie
3 ай бұрын
what is your intel card model
@ee70774 ай бұрын
C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all -defcfg Intel(R) Ethernet Flash Firmware Utility BootUtil version 1.40.05.0 Copyright (C) 2003-2023 Intel Corporation C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all ERROR: ALL option does not work standalone help pls, i dont know
Пікірлер: 51
Thank you, this worked a treat. Also established my cable was also a issue but that was a easy fix after this.
Omg this long story about intel is good on both languages Izzy speaks
Гутен морген Изя!
I'm working with an Intel(R) Ethernet Controller (3) I225-V and I've installed the latest PREBOOT.zip. Whenever I open cmd as admin to change the directory to the installed Winx64 folder to install the .bat file it mentions that it aborted the installation because the driver already exists yet it's still showing code 10 even after system restart. Following up with bootutilw64e.exe -nic=1 -defcfg and/or -all -defcfg yeilds: 1 (Cannot initialize adapter) is there anything else I can try to do?
@izzylie
Ай бұрын
try deleting the controller from device manager first, then let it rescan the devices
@k0ala166
Ай бұрын
@@izzylie didnt worked for me i tried to rescan for device but still cannot initialize adapter. Idk im not uised to work with cmd but im trying
im lost, i feel you need to elaborate way more for me to get a better understanding in command prompt, like what do i need to type?, i moved those installs to another folder and now im lost
@izzylie
Ай бұрын
study some basic computer literacy, i.e. filesystem and command prompt. after you get some knowledge the instructions will be crystal clear
ini kak wulan pernah mampir di channel ryan yg multilingual
thank you for your video. I navigated all of your steps successfully, with no errors, and the fix is not working. I have also now tried uninstalling the ethernet adapter, and following up with scanning for hardware changes. I tried doing this both before and after rebooting, with no success. I have an intel i219-LM ethernet adapter. do you have any advice? perhaps I could obtain somewhere a working firmware image for this network adaptor?
@izzylie
25 күн бұрын
you may want to boot from an ubuntu live usb and try the same under linux
@222sp33d
25 күн бұрын
@@izzylie thank you for your suggestion. I have not used ubuntu before, is it an entirely new operating system to replace windows? how is it relevant here specifically?
@izzylie
25 күн бұрын
I specifically said "live usb". You just boot ubuntu installation media in "try" mode. it will not install anything or replace your OS, however you can use the linux version of the same intel utility to try fix your networking. and I think intel also provides a bootable media to do the same. the idea is to remove windows out of equation
I get a "Setting PXE EEPROM words back to defaults on NIC 1...error Unable to write default configuration to EEPROM" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
@izzylie
4 ай бұрын
try removing it from device manager and then search for hardware changes
@rafikakbar8363
4 ай бұрын
@@izzylie done it bunch of times already, searched online and found someone says that it has to do with secure boot, tried disabling and re-enabling it back and forth but still not working
@izzylie
4 ай бұрын
are you sure you run cmd from admin though?
@rafikakbar8363
4 ай бұрын
@@izzylie yes i did
@izzylie
4 ай бұрын
may be you would try booting from say a live Ubuntu stick and do the same from there. there's a linux tool next to windows one on intel website
Can you help me to fix mine
What do i do if it says ERROR: PXE is not flashed on port 1
@izzylie
Ай бұрын
try to remove the card from device manager and repeat the steps
I get a "cannot initialize adapter" error when I run bootutilw64e.exe with either the -NIC=1 flag OR the -all flag.
@rlbigfish
4 ай бұрын
Actually, after that I uninstalled the device from Device Manager, used Scan for New Hardware, ran the bootutilw64e.exe command again and it worked like a charm. Rebooted, plugged the ethernet cable back in and bam, worked. You're a life saver!
@Marwan-oj3lc
4 ай бұрын
I get the cannot initialize adapter
@Marwan-oj3lc
4 ай бұрын
@@rlbigfishwhen i uninstall it from device manager and scan for hardware it gives cannot initialize also
@adamkadmon6339
2 ай бұрын
@@Marwan-oj3lc same for me: "cannot initialize adapter" and uninstalling and rescanning didn't help
@Marwan-oj3lc
2 ай бұрын
@@adamkadmon6339 I didn’t find any solution to it
it says cannot initialize adapter yes ive tried uninstalling from device manager and it is an admin cmd prompt
@izzylie
Ай бұрын
which adapter is that
@splat2glitcher
Ай бұрын
@@izzylie i218-v from asus z97-ar
@izzylie
Ай бұрын
I would try doing exactly the same thing, but from a linux live usb.
nice vid
Did it, the INF installed successfully, but then I got "Cannot initialize adapter" when executing Bootutilw64e ... It's definitely not physically broken, it worked fine until I made a clean reinstall of Windows.
@izzylie
6 күн бұрын
is the cable unplugged?
@stanislemovsky5590
3 күн бұрын
@@izzylie Hey, thanks for the reply. It wasn't, but I solved the problem in a different way. It seems the newest build of the driver (29.2.1) was faulty. As soon as I went back to 28.3 (the latest of the 28.x builds), it worked fine.
Not working for me. It set NIC 1 back to default but problem persists
@izzylie
2 ай бұрын
what is your card model
@ismailazeez1124
2 ай бұрын
I don't know how to check the model but it Intel(R) Ethernet Connection I219-LM
@izzylie
2 ай бұрын
try deleting in device manager and refreshing it
Not working for me Hp probook 640 g2 l219-Lm error 10
@izzylie
3 ай бұрын
the solution is the same. you may want to remove it from device manager first
ERROR: PXE is not flashed on port 1
@izzylie
3 ай бұрын
what is your adapter model
Учебник в интернет))
Promo*SM
not working 👎👎👎👎👎👎👎👎👎👎
@izzylie
3 ай бұрын
what is your intel card model
C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all -defcfg Intel(R) Ethernet Flash Firmware Utility BootUtil version 1.40.05.0 Copyright (C) 2003-2023 Intel Corporation C:\Intel29.0\APPS\BootUtil\Winx64>BOOTUTILW64E.EXE -all ERROR: ALL option does not work standalone help pls, i dont know
@izzylie
4 ай бұрын
whats the output of the two commands together?
@CausticAscarite
3 ай бұрын
Не ценят они твою помощь, не ценят... @@izzylie