Nice Work! I bet that exhaust sounds Mean!! looking forward to the next video!

@Themazcorner

3 жыл бұрын

Al thanks buddy! It sounds good but nothing like the Coyotes though, miss that V8 rumble dearly

Looks awesome man. Have been searching forever for a nice looking exhaust setup, i think i just found it. looking forward to the sound test video, and I hope it doesn't drone.

@Themazcorner

3 жыл бұрын

It sure is a nice looking system, it really elevates the rear! Yeah I will try to capture the sound as best as I can with the tools I have! Stay tuned :)

looks amazing such a neat and aggressive mod! well done!

@Themazcorner

Жыл бұрын

Thank you! Glad you like it

Really the best exhaust for the MX5 love the looks of the ulter exhaust 👍🏻

@Themazcorner

3 жыл бұрын

It sure does look apart and the sounds is really nice as well. I have not hear that many other systems on the ND so it is diffcult to compare. I have heard on lady with a (custom)Ferrita-system and that car sounds really nice

@stefhanbooden7778

3 жыл бұрын

had you also thought about the option with an electric valve?

@Themazcorner

3 жыл бұрын

no actually not for me it is not loud enough to quite it down. But I will post a sound review where I think there is some resonanse at 3k RPM where a valve would help

Very nice install and I’m thinking this is a must now.

@Themazcorner

3 жыл бұрын

It sure does enhance the car visually and sound wise. Could have been a bit louder in my opinion though! I have some issues with the "diffuser" will figure something out, if I do I'll post a vid on it.

Thanks for the video, I've got the same car and am looking forward to fitting the exhaust. I've just subscribed, thank you.

@Themazcorner

2 жыл бұрын

hope it helps! I have some issues with the "diffuser" will try to do a video on it. 3M tape does not seem to cut it.

Hey, thanks for the video! I’m thinking about installing the same exhaust on my Miata. Is this fully reversible if I want to sell the car / hand it back? Or am I drilling holes in the original rear bumper?

@Themazcorner

3 жыл бұрын

I have video coming with regars to diffuser. I cannot get it to sit properly with the 3m tape. I think som stronger glue or screws in more places are needed. However the additional screws would go into the oem black trim and not the bumper

Looks good bro 👍👍👍

@Themazcorner

3 жыл бұрын

tnx! It sure did turn out great!

Sounds awesome!

@Themazcorner

3 жыл бұрын

it does, videos coming soon with sound :)

@hoymikey

3 жыл бұрын

haha was waiting for it but didn't include weird.

I´ve got the same setup. Used different bolts too ;) . Sound is amazing, the look too!

@Maxx__YT777

3 жыл бұрын

Always install the muffler before the diffuser!

@Themazcorner

3 жыл бұрын

so I assume you had similar type of issue :D. It's weird that they don't mention anything about it. Was the flange on yours also with the larger hole facing the muffler? Aggreed on the last to points :)

@Themazcorner

3 жыл бұрын

yeah! I mocked everything up before I removed the muffler so all good from that aspect

Would you happen to have a link to where you purchased this specific exhuast and diffuser? When I search for it online I can't find any good links.

@Themazcorner

3 жыл бұрын

Hi, not sure where you live. I only have links to sites in Europe: www.mx5parts.co.uk/stainless-centre-exit-sports-exhaust-with-diffuser-mk4-p-4349.html, www.ilmotorsport.de/shop/article_detail.php5?aid=6535&oid=2186&depth=3&page=0&count=7&PHPSESSID=6c21e1f55d18989ad6d7024c30da4a67

@Themazcorner

3 жыл бұрын

I bought mine from ebay: www.ebay.de/itm/Ulter-Edelstahl-Sportauspuff-Mazda-MX5-ND-2x90mm-mittig-inkl-ABS-Heckblende/273859470722?fits=Model%3AMX-5+RF+Targa&hash=item3fc34be582:g:KJMAAOSwvvJdnJv9

This looks really good so far. I ordered a quad tip Ulter and will be installing it after i have fully absorbed your install. I’m not convinced that the spring-loaded fasteners are necessary. Don you know why they are used? Thanks for all this (and the zunsport grille too). I’ll stay tuned of course. I’m curious if the source of the diffuser has a version that fits the quad tip exhaust too. [While I am writing, what size wheels and tires are you running?]

@Themazcorner

2 жыл бұрын

thank you and congrats! Maybe you can reach out to Ulter directly regarding the "diffuser" they might have something. The springs are there to take up movement when the system expands and retracts I would guess. Back then I was running Konig Hypergrams 17x8 ET45 215/45 Cup2 tires. No I am running Advan Racing TC-4 17x8 ET35 215/45 Cup2 tires

@TheMazCorner did the tape on the diffuser hold up over time or did you go a different route?

@Themazcorner

Жыл бұрын

The initial round of tape did not hold up! When the car was in for repairs they shop did use glue. However I never told them to fix it 🤣.... I was intending to redo it with tape. But safest bed is to use some sort of glue I would guess

Väldigt snyggt! En mx-5 är min drömbil👍🏻

@Themazcorner

3 жыл бұрын

Tack så mycket!

question, if i have the club model with the rear defuser extend a little more than the normal version then this wont fit right?

@Themazcorner

3 жыл бұрын

Yes, as I have understood it the club rear diffuser needs to be removed for the Ulter one to be fitted as you mention

@ga6147

2 жыл бұрын

If you decide to swap out, I'm looking for a stock rear diffuser if in excellent shape.

@ga6147

2 жыл бұрын

@@Themazcorner Thanks for that clarification. I was wondering if the factory rear diffuser would work with this.

Looks great! I have been looking at the same ulter exhaust for my RF . The look is great! But will be interested in what it sounds like compared to the stock. 👍

@Themazcorner

3 жыл бұрын

thanks, it does indeed enhance the look! I have seen it live on a 30th RF-model and it looks great! Stay tuned for a sound review

@simonclarke8235

3 жыл бұрын

Can't wait! Don't make it too long as am eager to get it ordered 😁😂 can't seem to find a proper review of the Ulter, everyone seems to use the Goodwin race or the Bbr. 👍

Thanks for the video, do you have any drone? I want to install the same exhaust to my 1.5 L ND

@Themazcorner

2 жыл бұрын

I drones a bit at around 2-3k rpm

An Exhaust installation video without exhaust sound. Way to Go bro

@Themazcorner

3 жыл бұрын

I totally get your point but the video was long enough and also the character of the sound will change over time once the exhaust is "broken" in hence why I did not have any sound clips. As mentioned that will come in a separate video

@gtKeon

3 жыл бұрын

@@Themazcorner how long does it roughly take for the sound to change, I've installed the same exhaust on my nd MX-5, thanks to your sound clip you posted. 😁👍👍

@Themazcorner

3 жыл бұрын

@@gtKeon give it 500km or so it will change the characterisitc. How do you like it so far?

@gtKeon

3 жыл бұрын

@@Themazcorner so far I love it. I've only had the ulter installed not more then 2 days. So yeah so far so good 👍👍

@Themazcorner

3 жыл бұрын

@@gtKeon fantastic, its a really nice setup

Do u have other exhaust mods? Cats? Or only this muffler. Im waiting what it sounds like so i would buy for myself. Does the ulter exhaust have somekind of silencer on the tip? and is it remoavable? Thanks!

@Themazcorner

Жыл бұрын

When I recorded the video I did not have anything installed. I have since a catless and res deleted midmipe installed and it sounds really good! Unfortunately the HP does not match the sound :D The tips are not removable and there is no insert. Here is a video on the midpipe installation with some sounds clips as well kzread.info/dash/bejne/lHiDusumaJq0lMo.html

@user-mi8ie2kq4e

Жыл бұрын

@@Themazcorner sounded pretty neat with just the muffler

@Themazcorner

Жыл бұрын

@@user-mi8ie2kq4e have you checked my long term review of the Ulter? have some more clips of it there with the stock midpipe, much better compared to the OEM setup: kzread.info/dash/bejne/oYqG16ppoJOvZ84.html

Hi I’m having the same problem. I cannot get the diffuser to sit properly. I have used the recommended black silicone which didn’t work, then tried the 3 m tape that didn’t work either. Taped it all up for 24 hours but It seems to come away on the corners. Looking forward to hearing your comments and seeing your video if you have managed to resolve the problem. Cheers

@Themazcorner

3 жыл бұрын

I have a couple of ideas I will try to share in video which one I go for stay tuned. But yes I cannot get it to sit either....

@simonclarke8235

3 жыл бұрын

@@Themazcorner Look forward to seeing your video! Any idea when you are going to post it. I’ve been arguing with Ulter for the last two months trying to get a refund but have got nowhere. So the only alternative seems to be to have it fitted by a body shop which seems crazy and expensive.

@mariop.4898

2 жыл бұрын

@@Themazcorner Is there already a solution for the assembly problem? I tried to mount the diffuser last weekend, but didn't do it because it doesn't fit the curves of the bumper. There is always a visible gap. Does the 3M tape actually fill the difference in height (there is an edge after all). In my opinion, at this point, if you push the diffuser towards the bumper, there is a lot of tension on the diffuser. The gap then pops up again and again. The assembly looks so easy in the video and pressing the 3M tape seems to work and hold without any problems!?

@arm11922

10 ай бұрын

I wanna give some update about the diffuser, I’ve been using 3M tape for the first install and it hold up for about 7 months, after some car washes and back road driving it FALLS eventually, tried to reinstall it all over again last night and after 24 hours of wait it still would not stick. Just like a lot of you have mentioned there is some gap in the corners that wouldn’t be a tight fit to the bumper. I’m going to a body shop and ask them to use silicone, hope this works. In short: The Ulter sport exhaust diffuser Does NOT fit properly!

Nvm answered my question @ 9:57 definitely getting this exhaust and diffuser Could you just use screws for the diffuser? Just for that extra bit of security

@Themazcorner

2 жыл бұрын

correct you can only use hardware however i think there will be a gap between the diffuser and the car if no tape is used as well. Sorry for the late reply

whats the black fin on the rear bumper above the side marker light ?

@Themazcorner

3 жыл бұрын

you mean around the wheel arch? Those are there from OEM and usually manufacturer do this to to get around some weird legislation

Much much nicer than the stock system of the two exhaust tips off to one side.It should have came from the factory like this because IMO it balances the rear look of the car much better than with the exhaust tips off to one side

@Themazcorner

3 жыл бұрын

it is a much more aggressive looking system. I am not to fond of the "diffuser" thouhg. I have some issues with getting to sit in place. I will have to find an alternative solution to get it to sit

AMAZING LOOK, WHERE DID YOU GET THAT DIFUSSER?

@Themazcorner

3 жыл бұрын

The diffuser comes with the Ulter Sport exhaust

Hi. Are you going to install a F1 brake lights onto your diffuser?

@Themazcorner

2 жыл бұрын

you are thinking in the area were there is mesh? Not thought of it to be honest.

I did a cobalt and an ebay diffuser for mine. Yours looks really good, dig the wing too. Im thinking of going to a duckbill possibly

@Themazcorner

2 жыл бұрын

sorry for the late reply! I first bought the cobalt, but I never installed as I new I would want to have the ulter down the road! The spoiler is a really good deal in my opinion

Does the Ulter exhaust have a ABE or TÜV Certificate?

@Themazcorner

3 жыл бұрын

I am not sure to be honest! I can check if I still have the papers. In Sweden the TUV is not of importance

Hey TheMazCorner, did you reach out to ulter about the screws?

@Themazcorner

Жыл бұрын

I cannot remember to be honest if I did send anything to them or not. But I have been running with the same bolts/washers/nuts since install and it has worked fine

Love the video, very helpful/descriptive. Do you have a link or name for the diffuser? Thanks

@Themazcorner

2 жыл бұрын

thank you, glad you liked it Were do you live? If outside of europe I would look into ebay if in europe there are some more vendors you can get them from. I got min from Ebay eventhough I live in Sweden as it was the cheapest option. Keep in mind there are two versions one stainless and one that is not.

@in53278

2 жыл бұрын

@@Themazcorner okay, can you put this on with the appearance package rear lip? Thanks

@Themazcorner

2 жыл бұрын

I believe the appearance pack "diffuser" needs to be removed unfortunately

@in53278

2 жыл бұрын

@@Themazcorner okay I figured, thanks tho. How hard is it to remove? And will it chip the paint?

@Themazcorner

2 жыл бұрын

@@in53278 sorry for the late reply! I am not sure how difficult the appearance pack diffuser would be to remove. I would guess it is glued/taped and maybe some hardware/rivets? would think the the glue/tape would be the hardest part. Regarding chipping the paint are you referring to the Ulter diffuser?

Gran vídeo!!’ Muchas gracias !! Donde puedo conseguir ese modelo y también el difusor please 🙌🙌

@Themazcorner

3 жыл бұрын

Sorry I don't know spanish, but I understand Grand video and muchas gracias so I will say thank you lol

Nice!

@Themazcorner

3 жыл бұрын

tackar :)

What 3M tejp did you use? Was it enough in the end?

@Themazcorner

9 ай бұрын

The 3M VHB tape I used did not hold at least not with the way I had attached it. Car was in for some work and the shop re-attached with some more permanent bond

Hey! Nice look! How did you turn those emblems to black?

@Themazcorner

Жыл бұрын

Tnx! Plastidipped have a video on it How to plastidip your emblems - 2019 Mazda MX5/Miata 30th Anniversary kzread.info/dash/bejne/pnl3xtZwptXRXaw.html

Hej, vad grym du är! Varifrån har du köpt det? Tack på förhand!

@Themazcorner

2 жыл бұрын

🙏 tack! eBay köpte jag min ifrån! Återkommer med länk

@YT.13

2 жыл бұрын

@@Themazcorner tack snälla!!

@Themazcorner

2 жыл бұрын

@@YT.13 Jag köpte dock min ifrån Ebay ifrån en tysk handlare. Har även lagt in länkar till andra handlare med. Du kan köpa direkt ifrån Ulter själva med www.mx5parts.co.uk/stainless-centre-exit-sports-exhaust-with-diffuser-mk4-p-4349.html www.ilmotorsport.de/shop/article_detail.php5?aid=6535&oid=2186&depth=3&page=0&count=7&PHPSESSID=6c21e1f55d18989ad6d7024c30da4a67 Där jag köpte min: www.ebay.de/itm/Ulter-Edelstahl-Sportauspuff-Mazda-MX5-ND-2x90mm-mittig-inkl-ABS-Heckblende/273859470722?fits=Model%3AMX-5+RF+Targa&hash=item3fc34be582:g:KJMAAOSwvvJdnJv9

@Themazcorner

2 жыл бұрын

Hur gick det med beställningen

@YT.13

2 жыл бұрын

@@Themazcorner inget vidare.. får inget svar :(🙏

Whats the size of the new bolts for the OEM exausht? I finally purchase the Ulter Sport exausht , i want to know the size of the bolt so when i ask a local garage to fit i have all ready in place to give to them. Thanks in advance. Love your videos content :)

@Themazcorner

Жыл бұрын

Hello! Really sorry for the late reply! It's the same size just that they are longer. Do you need the lengths? Also thanks and congrats on the exhaust

@schankam

Жыл бұрын

@@Themazcorner Planning to buy this exhaust soon and will be interected by the lengths if you know them ;) Thanks mate

@Themazcorner

Жыл бұрын

Do you have IG or FB? I can send some pics on the bolts and dimension. M10, approx 67mm in length in total but maybe going a bit longer is more suited. I also have larger dished washers and m10 bolts. Did go for stainless steel ones and it has held up well

@schankam

Жыл бұрын

@@Themazcorner Awesome thanks for your answer. What's your IG handle ?

@Themazcorner

Жыл бұрын

Themazcorner 😀

hello nice mimix :-) how is the sound ? not enough? and we u cruising is slow or high? sorry for my english ( hello from france ) i want the same but iam afraid by an enormous noise thx for ur help friendly serge

@Themazcorner

2 жыл бұрын

No worries! I am working on a review video :) stay tuned

@sintineddi1

2 жыл бұрын

@@Themazcorner thx . Can u say its high sound ? just withour video? but i wait for it :-) thx friendly serge

@Themazcorner

2 жыл бұрын

In my opinion no. There is some boomy sound below 3000rpm. At 120-130km/h steady speed you can hear a bit . When pushing it is sounds nice in my opinion it could have been louder on full throttle

@sintineddi1

2 жыл бұрын

@@Themazcorner u can have a good hight to the rear with the diffusor?

@sintineddi1

2 жыл бұрын

@@Themazcorner the best things to say lol ..the height under the diffuser is not too low? forget my first question its was so bad lol

Coming from a Mustang to my 30AE the only thing I really miss is the sound. Looked at a OEM sport one but it was not very good. I like how the back of yours looks now but I am trying to be strong and keep mine as stock as possible (modded the Mustang a lot) but I will for sure do something with the exhaust eventually. I can wait to hear it!

@Themazcorner

3 жыл бұрын

do it, you can do it :D. I am also coming from Mustang a 2018. Had Borla Atak on it, one can switch to whatever exhaust on the MX-5 it still would be no contest, simply put it it aint no V8 :(. Yeah will try to capture the audio as best as possible with the tools I have. Stay tuned

Vart beställde du ljuddämparen?

@Themazcorner

3 жыл бұрын

Du kan beställa direkt ifrån Ulter, IL motorsport har, MX5parts har. Jag köpte dock min ifrån Ebay ifrån en tysk handlare www.mx5parts.co.uk/stainless-centre-exit-sports-exhaust-with-diffuser-mk4-p-4349.html www.ilmotorsport.de/shop/article_detail.php5?aid=6535&oid=2186&depth=3&page=0&count=7&PHPSESSID=6c21e1f55d18989ad6d7024c30da4a67 Där jag köpte min: www.ebay.de/itm/Ulter-Edelstahl-Sportauspuff-Mazda-MX5-ND-2x90mm-mittig-inkl-ABS-Heckblende/273859470722?fits=Model%3AMX-5+RF+Targa&hash=item3fc34be582:g:KJMAAOSwvvJdnJv9

Where did u buy that? share the link, love it!!

@Themazcorner

3 жыл бұрын

I have only seen it available in Europe: different sites that have it: www.mx5parts.co.uk/stainless-centre-exit-sports-exhaust-with-diffuser-mk4-p-4349.html, www.ilmotorsport.de/shop/article_detail.php5?aid=6535&oid=2186&depth=3&page=0&count=7&PHPSESSID=6c21e1f55d18989ad6d7024c30da4a67 I bought mine from: www.ebay.de/itm/Ulter-Edelstahl-Sportauspuff-Mazda-MX5-ND-2x90mm-mittig-inkl-ABS-Heckblende/273859470722?fits=Model%3AMX-5+RF+Targa&hash=item3fc34be582:g:KJMAAOSwvvJdnJv9

Nice video! Were the bolts supplied with the exhaust kit designed wrong? Did you contact the kit supplier and did they explain why the bolts were too short?

@Themazcorner

2 жыл бұрын

Thank you! If I recollect there were not bolts supplied. Maybe the OEM ones can be re-used the have a nut on side that seems to be threaded (but I could not get it loose so increase the span) I never did come around to contact Ulter, have been using the bolts I got from the hardeware store since.

Frage: hält der 3M Klebestreifen auf Dauer....Waschstraßen und Wasser gereignet...?

@Themazcorner

Жыл бұрын

sorry for the late reply! I would suggest to use some sort of glue. It is difficult to get the 3M tape to sit properly due to the shape of the diffuser.

wow , watched the whole video to not hear what it sounds like. major click bait

@Themazcorner

3 жыл бұрын

sorry you feel like that. I am working on two separate videos for the sound. Reason for not having any sound clips is that this video itself was quite long also the system needs to be broken in. The sound now is different compared to when just installed.

@rusilver2

3 жыл бұрын

thanks! saved me a bunch of time!

@Themazcorner

3 жыл бұрын

I have uploaded a separate video with driving sounds

@Arokeji

3 жыл бұрын

Title clearly says Installation

@ligergames940

3 жыл бұрын

@@Themazcorner just love how honest you are keep up the good shit

Bonjour ; il est homologué le pot ulter pour la France. Merci

Where did you buy the diffuser, please friend! ..... link

@Themazcorner

Жыл бұрын

It came with the exhaust.

whats the background music?? please reply someone who knows

Where can I buy that difusser? Thanks for the video

@Themazcorner

Жыл бұрын

the diffuser came with the exhaust. You can buy separately from IL motorsports in germany and I believe Zymexx in germany has it as well

@gabrielpinalesrod7526

Жыл бұрын

@@Themazcorner in the USA,Do you know someone?

@Themazcorner

Жыл бұрын

Unfortunately no :(

where did u buy the difuser?

@Themazcorner

2 жыл бұрын

It came with the exhaust

Am I blind, but I’m looking for where you bought voy diffuser and muffler

@Themazcorner

2 жыл бұрын

Sorry for that I have updated with a link in the video description. I got mine from eBay as well

You don’t need to remove the old llip? Just stick on the deffuser

@Themazcorner

2 жыл бұрын

Yes no need to remove the OEM trim

No screws for the diffuser?

@Themazcorner

3 жыл бұрын

There are four screws actuallu, two in the middle and and one on each side by the ends, but it is not sufficient unfortunately.

@ronsy092773

3 жыл бұрын

Nice mods! Love your Miata 😍

@Themazcorner

3 жыл бұрын

Thank you 🙏

Will this fit my 2020 mx5 sport?

@jaimemendoza665

3 жыл бұрын

Love your car by the way🔥

@Themazcorner

3 жыл бұрын

Thank you 🙏! If the car has the OEM additional diffuser then it needs removed fist in order for the diffuser in the kit to fit.

@jaimemendoza665

3 жыл бұрын

@@Themazcorner thank you! My car has the same small diffuser your car had stock. I’m going to be ordering the same as you for my 2020 sport mx5. What’s everything I need to buy? Thanks🙏🏽

@Themazcorner

3 жыл бұрын

@@jaimemendoza665 Great! You will need to get longer bolts for where the Ulter meets the midpipe on the car. The ones provided are to short at least on mine as you may have seen in the video. Also only using 3M tape was not enough to hold the diffuser in place. I will try to find a solution for it soon. I'll post a video if I find a good way of solving it

@jaimemendoza665

3 жыл бұрын

@@Themazcorner thank you! 🙏🏽 yes let me know please. Can I get a link on where to buy this exhaust + diffuser?

👍

@Themazcorner

3 жыл бұрын

tnx

Hey Maz. I bought this exhaust and i took it to my mechanic to be installed. I took the car Today and I noticed that he installed it strangely. The black plastic part its been installed with 20mm spacers and screws on the two sides. So the right and left extreme sides are not sticked at all to the stock plastic back. I wanna kill the f..g mechanic. Then the exhaust exits are soo close to the plastic part that with vibrations touches it. I have to find the way to disinstall the rear plastic ulter thing and reinstalling in properly. Fuckkkkkk

@Themazcorner

Жыл бұрын

Hmm that installation does not seem correct. I have not used any spacers on mine :/ There was a company that re-did mine when they were fixing some damage on the car. And they did mount the diffuser to close to the exahust :( and they have used glue as well

@lucianolucidi8624

Жыл бұрын

@@Themazcorner its exactly what happened to me. I took it to a mechanic to install the diffuser. But I see it would have been better to do by myself. You know whats the nowaday's problem here? There are less and less prifessionists. Many mechanics dont have a brain. Anyway at the end i ll fix it some how

Seriously 15m and you don’t add a sound demo? What the actual

I’m annoyed you didn’t show how it sounds lol

@Themazcorner

2 жыл бұрын

I am sorry for that ! I hope I can have a real review of it soon

@americanoligarchy8825

2 жыл бұрын

Everyone is look at the like to dislike. This whole video is pointless.

Great videos Maz, but please stop that uptalk. It gets really unnerving to listen to.

@Themazcorner

2 жыл бұрын

Thank you! You can always fast forward :D The intros are there to give some background as not everyone has seen previous videos or what the mod/product is. what is that I can improve from the way you see it

Wow all that no sound so lame. Great install though

@Themazcorner

Жыл бұрын

Haha sorry, exhaust systems need to be broken in as the character will change(in my opinion) I have other videos with a long term review and catless midpipe installation Review kzread.info/dash/bejne/oYqG16ppoJOvZ84.html Midpipe installation kzread.info/dash/bejne/lHiDusumaJq0lMo.html