Thanks for best instruction !!! Best regards from Poland !!!
@jbhtravels13
7 жыл бұрын
Krzysztof Gubański Thank you Poland 🇵🇱 ! 😎👍🏼
@betsyberger50536 жыл бұрын
Wow. That is a lot more work than expected. Definitely do not want to drop some of those small parts in the lake ; )
@many95007 жыл бұрын
Thx a lot. good job. Gonna do t same soon. This will help for sure.
@jbhtravels13
7 жыл бұрын
many9500 Thank you! I didn't find any films on the topic so I made an own 😉 Good luck with the job 👍🏼 I can't wait to test it when the ice are gone here in Finland 😊👍🏼
@montoyabiz3 жыл бұрын
Excellent video! what do you torque the handle bar clamping bolts on minute 11:30? or just by hand?
@joefishtale5 жыл бұрын
did you need to purchase the extended wiring kit and the mounting kit for the risers? from what I read I need 3 kits total,
@penakaivo82257 жыл бұрын
Hyvä video👍🏻
@jbhtravels13
7 жыл бұрын
Axel Reunanen Kiitos! 😎✌🏼
@manuelvaldez70632 ай бұрын
I have a spark and I also want to do that change what number of parts they are.
@UA222225 жыл бұрын
Огромное Спасибо очень помог !!!!!!
@gabinyetov7 жыл бұрын
Will new stile grips fit on this handlebar?
@greggjarvis1332 жыл бұрын
On a 2016 spark it does not have the rectangular hole you passed the big end of the the harness through - do i have to cut that port?
@mateuszkosmalla97262 жыл бұрын
Hi! Did you have the hole through which you put the new steering wheel wiring at the factory or did you do it yourself? Greetings from Poland
@hitmannor1983 Жыл бұрын
What is the part number from brp we need here? are ther 2 numbers? or 1?
@anthonymiller18667 жыл бұрын
thanks for video can you let me Know how it ride and did you put one step wedges?
@jbhtravels13
7 жыл бұрын
+Anthony Miller Yes, we will make a video of the first test, but at the moment our waters are to cold, since we only have 27 F outside and ice on our waters. We wont put the steps wedges on because we mostly ride safaris and big wave riding.
@jimmyblais59136 жыл бұрын
what is the year of your spark
@oduwaik Жыл бұрын
Is the wiring the same you own already that was installed with the old handlebar? Or you had to buy a new compatible wiring?
@brandon15163 жыл бұрын
How much did the parts cost? Cheers
@jasamasa91063 жыл бұрын
Jos on Sparkissa valmiiks trim/vts, niin tarviiko muuta vaihtaa ku säätöpala ja stonga?🤔
@Franks_Garage4 жыл бұрын
Looks like you didnt need a harness? Trying to figure out why people say you need the $80 harness to make it work, especially without vts/ibr
@oduwaik
Жыл бұрын
Yes I also heard this and now I dont know if to buy the harness or not
@user-ib3ym3ru5n7 жыл бұрын
wow good, i have question.if i install handlebar to my spark, can i do wheelie esay??
@jbhtravels13
7 жыл бұрын
성현이 Thanks 😊 The handlebar is more for the riding position. For easy wheelie you also need to install the "Trixx VTS" (trim) which is compatible with 2017 iBR Sparks.
@user-ib3ym3ru5n
7 жыл бұрын
i wanna buy Trixx VTS. where i buy it?? how to buy??
@jbhtravels13
7 жыл бұрын
성현이 You get it as original Sea-Doo accessory. Just contact your local Sea-Doo dealer 👍🏼
@internetttroll1908
5 жыл бұрын
@@jbhtravels13 no need for VTS. u can still do wheelies, on a non ibr spark. its just alot harder, and more fun if u ask me. everyone can do it on a trix. not all can do it on a non ibr spark.
@Evlvedd
3 жыл бұрын
@@internetttroll1908 yes doing a wheelie on a non ibr spark makes me feel so much more accomplished cause I actually have to put in work to do it :)
@internetttroll19085 жыл бұрын
Hello, I have a non ibr spark , and got my self a used trix handlebar, but i didnt get the extended wiring with it. Can i just cut and make it longer the wires? waste of money if they are normal copper wires. Need answer asap
@fantaproductions
5 жыл бұрын
wondering the same thing, any information about it so far?
@internetttroll1908
5 жыл бұрын
@@fantaproductions i just got home, installing as we speak, just here to see what he does. new 2019 kit, not the old funky 2017 model riser
@fantaproductions
5 жыл бұрын
@@internetttroll1908 do you mind sending me a PM with the stuff that you've used? :D
@internetttroll1908
5 жыл бұрын
@@fantaproductions just buy the trixx ricer kit, and thats it. Took some time to fit, but works great! no extra harness or that plastic front thingy. just be careful when cutting the hole behind the display.
@oduwaik
Жыл бұрын
@@internetttroll1908 i have iBR 2019, I only get the handlebar without the wiring harness?
@alexbonhomme65227 жыл бұрын
where did you order the parts?
@jbhtravels13
7 жыл бұрын
TewwFilms From my local Sea-Doo dealer www.motojet.fi . It's an original Sea-Doo accessory so all authorized Sea-Doo dealers should have it 👍🏼
@internetttroll19086 жыл бұрын
so, i dont need to buy the mounting kit they sell? then what is it for? do i need to buy a new wireloom that is longer for my 60 hp non ibr/vts spark?
@tobiashaglund2819
5 жыл бұрын
was thinking the same thing.
@markusmiettinen58846 жыл бұрын
Myytkö sun tota alkuperästä seadoo sparkin tankoa, olisin kiinnostunut kun oma hajosi?
@jbhtravels13
6 жыл бұрын
Markus Miettinen Voin kyllä myydä, sehän on uusi ja käyttämätön. Laita vaikka WhatsApp-viesti tai soita numeroon 05060500 niin päästään hommassa eteenpäin.
@jarkkok84377 жыл бұрын
Mulle tulossa myös kyseinen kitti :)
@jbhtravels13
7 жыл бұрын
+Jarkko K Mahtavaa! Hienoa kun saa lisävarusteena. 👌🏼
@mikeluhrs45787 жыл бұрын
do you need to buy more cable to fit the extra height?
@jbhtravels13
7 жыл бұрын
Mike Luhrs Yes you need to change the cable kit which you also get as an original accessory from BRP 👍🏼
Пікірлер: 45
Thanks for best instruction !!! Best regards from Poland !!!
@jbhtravels13
7 жыл бұрын
Krzysztof Gubański Thank you Poland 🇵🇱 ! 😎👍🏼
Wow. That is a lot more work than expected. Definitely do not want to drop some of those small parts in the lake ; )
Thx a lot. good job. Gonna do t same soon. This will help for sure.
@jbhtravels13
7 жыл бұрын
many9500 Thank you! I didn't find any films on the topic so I made an own 😉 Good luck with the job 👍🏼 I can't wait to test it when the ice are gone here in Finland 😊👍🏼
Excellent video! what do you torque the handle bar clamping bolts on minute 11:30? or just by hand?
did you need to purchase the extended wiring kit and the mounting kit for the risers? from what I read I need 3 kits total,
Hyvä video👍🏻
@jbhtravels13
7 жыл бұрын
Axel Reunanen Kiitos! 😎✌🏼
I have a spark and I also want to do that change what number of parts they are.
Огромное Спасибо очень помог !!!!!!
Will new stile grips fit on this handlebar?
On a 2016 spark it does not have the rectangular hole you passed the big end of the the harness through - do i have to cut that port?
Hi! Did you have the hole through which you put the new steering wheel wiring at the factory or did you do it yourself? Greetings from Poland
What is the part number from brp we need here? are ther 2 numbers? or 1?
thanks for video can you let me Know how it ride and did you put one step wedges?
@jbhtravels13
7 жыл бұрын
+Anthony Miller Yes, we will make a video of the first test, but at the moment our waters are to cold, since we only have 27 F outside and ice on our waters. We wont put the steps wedges on because we mostly ride safaris and big wave riding.
what is the year of your spark
Is the wiring the same you own already that was installed with the old handlebar? Or you had to buy a new compatible wiring?
How much did the parts cost? Cheers
Jos on Sparkissa valmiiks trim/vts, niin tarviiko muuta vaihtaa ku säätöpala ja stonga?🤔
Looks like you didnt need a harness? Trying to figure out why people say you need the $80 harness to make it work, especially without vts/ibr
@oduwaik
Жыл бұрын
Yes I also heard this and now I dont know if to buy the harness or not
wow good, i have question.if i install handlebar to my spark, can i do wheelie esay??
@jbhtravels13
7 жыл бұрын
성현이 Thanks 😊 The handlebar is more for the riding position. For easy wheelie you also need to install the "Trixx VTS" (trim) which is compatible with 2017 iBR Sparks.
@user-ib3ym3ru5n
7 жыл бұрын
i wanna buy Trixx VTS. where i buy it?? how to buy??
@jbhtravels13
7 жыл бұрын
성현이 You get it as original Sea-Doo accessory. Just contact your local Sea-Doo dealer 👍🏼
@internetttroll1908
5 жыл бұрын
@@jbhtravels13 no need for VTS. u can still do wheelies, on a non ibr spark. its just alot harder, and more fun if u ask me. everyone can do it on a trix. not all can do it on a non ibr spark.
@Evlvedd
3 жыл бұрын
@@internetttroll1908 yes doing a wheelie on a non ibr spark makes me feel so much more accomplished cause I actually have to put in work to do it :)
Hello, I have a non ibr spark , and got my self a used trix handlebar, but i didnt get the extended wiring with it. Can i just cut and make it longer the wires? waste of money if they are normal copper wires. Need answer asap
@fantaproductions
5 жыл бұрын
wondering the same thing, any information about it so far?
@internetttroll1908
5 жыл бұрын
@@fantaproductions i just got home, installing as we speak, just here to see what he does. new 2019 kit, not the old funky 2017 model riser
@fantaproductions
5 жыл бұрын
@@internetttroll1908 do you mind sending me a PM with the stuff that you've used? :D
@internetttroll1908
5 жыл бұрын
@@fantaproductions just buy the trixx ricer kit, and thats it. Took some time to fit, but works great! no extra harness or that plastic front thingy. just be careful when cutting the hole behind the display.
@oduwaik
Жыл бұрын
@@internetttroll1908 i have iBR 2019, I only get the handlebar without the wiring harness?
where did you order the parts?
@jbhtravels13
7 жыл бұрын
TewwFilms From my local Sea-Doo dealer www.motojet.fi . It's an original Sea-Doo accessory so all authorized Sea-Doo dealers should have it 👍🏼
so, i dont need to buy the mounting kit they sell? then what is it for? do i need to buy a new wireloom that is longer for my 60 hp non ibr/vts spark?
@tobiashaglund2819
5 жыл бұрын
was thinking the same thing.
Myytkö sun tota alkuperästä seadoo sparkin tankoa, olisin kiinnostunut kun oma hajosi?
@jbhtravels13
6 жыл бұрын
Markus Miettinen Voin kyllä myydä, sehän on uusi ja käyttämätön. Laita vaikka WhatsApp-viesti tai soita numeroon 05060500 niin päästään hommassa eteenpäin.
Mulle tulossa myös kyseinen kitti :)
@jbhtravels13
7 жыл бұрын
+Jarkko K Mahtavaa! Hienoa kun saa lisävarusteena. 👌🏼
do you need to buy more cable to fit the extra height?
@jbhtravels13
7 жыл бұрын
Mike Luhrs Yes you need to change the cable kit which you also get as an original accessory from BRP 👍🏼