Nice truck and clean work you did! I have a 2019 6.7 and love it I use all SPE products good quality and long wait time but worth it.

@PowerstrokeRick

2 жыл бұрын

Thanks brotha much appreciated! And yeah I’m the same way I try and get everything SPE I don’t mind the wait!

Great video. Thank you.

@PowerstrokeRick

8 ай бұрын

Glad you liked it! Thanks for watching!

Tried to do business with SPE. They were terrible. Went with Pusher and glad I did.

@PowerstrokeRick

Жыл бұрын

Sorry to hear that I have not had any issues they are awesome!!

@L15a5haw

4 ай бұрын

SPE has never been a problem we own 2 6.7 they always fill orders fast Pusher intakes seems cheap in comparison to SPE

@awisemanoncesaid7356

7 күн бұрын

If they made good products you shouldnt have too make that many orders

Subscribed!

@PowerstrokeRick

4 ай бұрын

Thank you for the support much appreciated!

Thanks for the video buddy. Where did you get radiator hose from? Trucks bad ass bud

@PowerstrokeRick

2 жыл бұрын

Thanks man appreciate it! The upper rad hose is from MPD

Sick kit. Do you have ez lynk ? Did you have to change your current tune to accommodate for the new piping and throttle plate not being there ?

@PowerstrokeRick

Жыл бұрын

Yes I love it! And no I I didn’t have to change anything

@jostinpoitrass8130

Жыл бұрын

@@PowerstrokeRick wicked man thanks for the info I’m deleting my 19 right away gonna get all the same stuff basically

Do you need the coolant reroute kit to be able to install this or can i get the reroute stuff later?

@PowerstrokeRick

8 ай бұрын

You can install without the coolant reroute kit

What egr kit do you have and what is your fuel mileage at the moment?

@PowerstrokeRick

Жыл бұрын

Just regular kit and maybe 12-14

Now that it’s been a while any notable gains.?lower Egts? Mpg? Better response in throttle and boost off the line

@PowerstrokeRick

Жыл бұрын

For some reason in my 2017 I get really good fuel Mileage but not in the 2015 blue truck. Maybe because of the lift and wheels. But I have noticed it sounds a bit louder, lower EGTs and a bit better response

@oddlyrightoddlyright2475

Жыл бұрын

@@PowerstrokeRick awesome man just fixing up my 17…it’s not bad on mileage either but always looking for more…not looking at hot rodding my tow rig but if theirs gains it might be worth it…

@PowerstrokeRick

Жыл бұрын

@@oddlyrightoddlyright2475 yeah I hear ya and I definitely suggest getting it, I gotta buy one for my 17 next!

I'd really like to know if this will help in any way with fuel mileage?

@PowerstrokeRick

2 жыл бұрын

It might help a little bit, I saw mine go up a little but nothing crazy, everything is just breathing really good now, getting good boost

@colt4528

2 жыл бұрын

I did SPE piping kit I didn’t notice a increase in fuel mileage around town, I did notice better throttle response. BUT I noticed a big difference in towing and getting 1.5 mpg better towing heavy at highway speeds under a load.

Where does the sensor noted at 11:38 go after everything is installed? My rig is deleted so is it part of the emissions that are turned off

@PowerstrokeRick

7 ай бұрын

Yes not re used

@tomrucker2737

7 ай бұрын

Thanks brother . Keep the vids coming

Have you done the disaster prevention on your fuel system yet ? that I hear is a must

@PowerstrokeRick

2 жыл бұрын

No not yet

@colt4528

2 жыл бұрын

I have done it and well worth the money nice kit and doesn’t hurt the fuel pressure

@gavinmesserly

5 ай бұрын

I’m opting for the S&S DCR pump conversion instead! It’s $2k, but cheaper than the alternative. And cheap piece of mind!

What did you doo with the sensor on the lower intake? That you blocked off with the ccv reroute.

@PowerstrokeRick

Жыл бұрын

Just tied it off it’s not needed

@justinpage2908

Жыл бұрын

@@PowerstrokeRick does it not throw a code if not connected ?

@PowerstrokeRick

Жыл бұрын

@@justinpage2908 nope no codes. Just tie the connector off!

What kind of EGR delete kit do you have?

@Sasquatch7.62

Жыл бұрын

If you watch the video, around the 5:50- 6 minute mark, you'll see the delete kit says "zeigler diesel". Look that up and go from there. I got mine from banks.

Where did you pick up the upper radiator pipe?

@PowerstrokeRick

10 ай бұрын

It’s a MPD pipe they sell it on there site, and then I have a SPE one on my 17

Does this kit eliminate the throttle body ?

@awisemanoncesaid7356

7 күн бұрын

Yeah , it looks like it. I dont see how you can install this without a tune

What upper rad pipe is that? Like it?

@PowerstrokeRick

Жыл бұрын

It’s the mpd upper rad pipe and yes I love it! It’s a little pricey around 400 without powder coat

Do you have to do a egr delete for this kit?

@L15a5haw

4 ай бұрын

No

How is it able to accelerate if it has no throttle body anymore?

@matteg95

5 ай бұрын

That's what I want to know too.

What did you do with the throttle body plug? And if you left it unplugged did it throw a check engine light?

@PowerstrokeRick

Жыл бұрын

Just tied it off since it wasn’t being used anymore. No CEL thrown either

@jethroco99

Жыл бұрын

Thank you for replying back, I was looking at that system for my 2011 and seeing that missing is what stopped me from pulling the trigger on getting it.

@PowerstrokeRick

Жыл бұрын

@@jethroco99 yup no problem and you should be all good assuming you have a tune already?!

@jethroco99

Жыл бұрын

I have a mild 80 horse tune

@PowerstrokeRick

Жыл бұрын

@@jethroco99 okay yeah you will be good!

Hey, Rick what are the torque specs on manifold Y pipe bolts ? TIA

@PowerstrokeRick

3 ай бұрын

Calls for 89in LBS but I just go really snug by hand with blue thread locker

@brendaehrhard9038

3 ай бұрын

@@PowerstrokeRick thank you again

Any of y’all get a code for too much air after installing this ?

@PowerstrokeRick

2 ай бұрын

No codes over here you shouldn't get them

What brand is your topside creeper?

@PowerstrokeRick

10 ай бұрын

Traxion 3-700

Is the intake louder now?

@PowerstrokeRick

2 жыл бұрын

Definitely sounds better when getting on it and breathing better to! It’s not a crazy difference on sound

Just installed this on my 15 6.7 and I’m having problems with the boots blowing off when I get on it hard… anyone had these problems?

@PowerstrokeRick

Жыл бұрын

You make sure the clamps are tight? What did you use to slide the boots on with and lubricant?

@shawnparis3570

Жыл бұрын

@@PowerstrokeRick no lubricant they went on without soap and water and yeah they were plenty tight… fitted them back on and made sure to get the lip past the clamp and will try again in the morning

@PowerstrokeRick

Жыл бұрын

@@shawnparis3570 ok let me know what happens I’m the morning, which ones are slipping off the cold side or the hot side?

@shawnparis3570

Жыл бұрын

@@PowerstrokeRick cold side first time was the 90 on the Intercooler and the second time it was the boot on the y pipe

@shawnparis3570

Жыл бұрын

@@PowerstrokeRick seems to be fine now the boot on the y pipe is just barely long enough to get a good bite on both sides but with some force and an extra hand it’s holding on tight now

Will this kit work with stock emissions equipment? Looks sick!

@landonfox5168

Жыл бұрын

No, it removes throttle blade assembly and bypasses egr. Truck requires a tune and full delete.

@toddpharmer2460

Жыл бұрын

@@landonfox5168 cool I'm already deleted will it improve towing mpgs?

@landonfox5168

Жыл бұрын

@@toddpharmer2460 you will probably notice a slight increase in mpgs on daily driving. It's so hard to tell on towing. Depends on tune, driving habits, etc. Mine with 15 tons behind it gets 3.7

@toddpharmer2460

Жыл бұрын

@@landonfox5168 Holy crap! Thanks for the relpy

@landonfox5168

Жыл бұрын

@@toddpharmer2460 not pulling anything they are ok ,but they are not built to be fuel efficient.

Nice job..are you still selling cold side pipe? I’ll take it if so..thanks for video🤙🏼

@PowerstrokeRick

10 ай бұрын

Thank you and thanks for watching! The cold side is gone unfortunately

@Bmitch3521

9 ай бұрын

@buszzbait69 I have this same pipe for sale that's 2 weeks old if your interested

@jeremycopeland281

5 ай бұрын

@@Bmitch3521whatcha got?

@Bmitch3521

5 ай бұрын

@@jeremycopeland281 I got the SPE cold side pipe for sale since I got the intake piping kit.

@jeremycopeland281

5 ай бұрын

@@Bmitch3521 I have that. Thanks though

What the advantage to this set up.

@PowerstrokeRick

4 ай бұрын

Performance gains the list goes on

@JimmyJammer1

4 ай бұрын

That setup won’t work with the stock air box ….?

@PowerstrokeRick

4 ай бұрын

@@JimmyJammer1 yes it can

Spe said 3-5 weeks in stock Took them over 8 weeks to get it to me Terrible customer service

@matthewgraham7419

2 жыл бұрын

I will second that motion. Buyer beware, they are some of the most disrespectful business owners I have ever had to deal with. Amy and Chance are down right nasty in email communication. No accountability or respect what so ever. Parts are awesome, people are awful. They need some new front office customer service, Dan is the dude and dreams up the best parts in the business. Painful painful purchasing experience!!!

@stevenhall1392

2 жыл бұрын

Ordered mine in March. Just came in end of July. Chance is a smart ass. Great parts but horrible sales people

@justinfannon8159

2 жыл бұрын

i just ordered the ccv reroute, it came in like 8 days, 0 issues with customer service.

@davidbryan5203

2 жыл бұрын

Unfortunately this has been my experience as well. I've ordered and received items from SPE twice before and just placed a third order. I have never received an order from them even remotely close to the estimated ship date, and all the posted shipping/short staff notices have been woefully optimistic to say the least. My first order arrived nearly a full month after the longest supplied shipping estimate (this took into account the COVID delays and material shortage notices posted on the website). The second order was nearly three weeks later than expected. Both times the customer service and support have been dreadful. Rude, short, uninterested, and assuming would be the adjectives I'd use to describe the experience. All this being said, as I previously stated, I just placed a third order. This is because I firmly believe SPE offers some of if not the best aftermarket products for these trucks. The designs just make sense, and the quality is second to none. This makes the subpar ordering experience worth it to me. If Dan at SPE could get the customer service issues rectified and the shipping issues straightened out, I personally believe SPE would be a force to be reckoned with in the Aftermarket Industry. Until then it will most likely be relegated to people like myself who want nothing but the best, and are willing to put up with the abuse to get it.

@bigtimearcher1

2 жыл бұрын

I have had nothing but bad luck with SPE. Chance is a straight up dick. Their mentality is once the sale is done, they got their money and it’s not their problem anymore. My biggest problem was their disaster prevention kit. Once I installed it, whenever I would make a wot pull, I would get “reduced engine power “ notifications on my dash. The fuel pressure became inadequate for the fuel demand. I ended up calling, talked (unfortunately)to chance about it and was told “nobody’s ever had that problem” upon looking online, there is a huge number of guys that have experienced the same thing. I pulled the kit off and returned that back to stock and my problem immediately went away. I called again for a return/refund and was told I was out of their return period….. Even though I waited 6 months to get the part, 30 days from purchase is all they give….. essentially, I had no option to return from the get go! So I will definitely tell anyone looking at SPE buyer beware! I will continue to deal with no limit fabrication where they carry good parts and they stand behind them.

Upgrade the intercooler

Selling my spe intake piping brand new never installed if anyone interested

@Adam-tx9rc

7 ай бұрын

Im interested if you haven’t sold it yet

If I was susceptible to motion sickness, your camera work would do the trick.

I've never seen videos that are so long that literally show nothing but the parts and then the end You never show the metal what you do how you do it all the bolts this and the other I mean show the whole process show the parts show the stuff taken off what's the hard part to taking it off where the bolts are it's like you just have videos that show your the parts on the ground or your unraveling them The parts on the truck and then when they're off you just show them laying on the ground and then And then you show the parts when they're already on the truck just show the process man

@PowerstrokeRick

Жыл бұрын

SPE has detailed instructions on there website if you don’t like it don’t watch it bud

@onlyeasydaywasyesterday

Жыл бұрын

@@PowerstrokeRick no you have good videos man but you got to you got to show the process I get there's instructions and all that stuff but you know some people like to watch videos and when you make a video do the process of the whole video Don't just put like parts on the ground on doing stuff and then you're like this is what it looks like before and then you're like you do like two bolts and then all of a sudden everything's off this is what it looks like and then you you know start talking about the stuff that needs to go on there and then the process is done oh this is what it looks like at the end it's like it's not an install video you know I mean I'm not trying to be a dick but if you're going to do an install video do the full install get you get yourself a tripod that you can put on your thing and then just start installing the video dude that's that's all

@onlyeasydaywasyesterday

Жыл бұрын

@@PowerstrokeRick I'm just trying to learn the process of putting this stuff on because this is the first diesel I've had and when I watch videos like you and pop Corey and stuff like that and Dan from SPE you know top Cory does a lot of you know good installs but you know I like your videos too but you just got to I'm just trying to give you constructive criticism You have great videos You just see the show more the process that's all

What topside creeper are you using?

@PowerstrokeRick

Жыл бұрын

It’s the traxion 3-700

@RWB930

Жыл бұрын

@@PowerstrokeRick Thank you I just ordered one. Badass truck too. I’m going KC stage 2 with a stroker pump now for my 6.7

@PowerstrokeRick

Жыл бұрын

@@RWB930 thanks man appreciate it!! And yes the creeper is nice I wish the quality was a bit better but it works great!!

@PowerstrokeRick

Жыл бұрын

@@RWB930 them kc turbos are sick!!!

@RWB930

Жыл бұрын

@@PowerstrokeRick I’ll post a video when she’s all done.