Installing Milltek Sport Exhaust on our Project Cupra! + DYNO!
Автокөліктер мен көлік құралдары
Today we take the first steps with our Project Cupra 300 by installing a Milltek Sport exhaust on it. As this video shows, it is not that simple. Contrary to popular belief, swapping out the exhaust will not give you any horsepower gains without a remap, something that will surely follow in the nearby future.
Milltek Exhaust: milltekshop.com/
Topics:
00:00 Intro
00:13 OEM Exhaust
01:14 Preview
03:00 Scooter past
05:00 Milltek Exhaust
08:23 Milltek Soundcheck
09:45 Milltek Dyno
10:40 OEM Dyno
12:55 Conclusion
16:26 Soundcheck Stripped Interior
16:55 Coming Up Next
@xthilox 400+ HP Cupra with Milltek Exhaust: • The Fastest Hot Hatch ...
The winner of the calendar giveaway: Björn Bornholdt, his guess was the closest: 304,1 WHP, which is only 0.16 hp off the right amount.
Get in touch with me on social:
/ mgcharoudin
/ mgcharoudin
/ mishacharoudin
/ mgcharoudin
Пікірлер: 144
Some important notes! First of all, congratulation to the Apex Calendar giveaway winner: Björn Bornholdt ! Please email info@apex-nuerburg.com to claim it! Next, for people who look at the numbers only, this shows that a remap is essential to unlock the exhaust benefits/potential. As demonstrated by Thilo who is running 4xx HP on his Cupra with a Milltek Exhaust: kzread.info/dash/bejne/n518sNKNkpbbpLA.html And something that we will do in the future, although not 4xx hp :)
@RDSAlphard
3 жыл бұрын
Congratulation to the winner!
@marcnobel3938
3 жыл бұрын
Will it be the 5xx ?
@snoopydogg1
3 жыл бұрын
Great video as always and thanks for doing the dyno run before and after! I think you would have got away easily within your own rules to just have the rear silencer and the resonator or middle muffler / silencer as you call it without the additional 3rd box. That's made it even quiter than it was stock and negated the extra size larger you went due to 3 restrictions... it sounded better stock sorry to say.
Not sure if anyone mentioned it yet, but you should disable the sound generator (sound aktor) to hear the real engine sound without artificial sounds :)
@Blasterxp
3 жыл бұрын
Yeah, no more fake mp3 sound. Good comment!
@snoopydogg1
3 жыл бұрын
@@Blasterxp its not a fake mp3 sound piped into the cabin... its not played through the speakers its a sound actuator that ironically vibrates the windscreen.
@_CaliCeramics_
3 жыл бұрын
Currently in the USA and drive a 2016 7R I do have the sound aktor turned off, eom downpipe, xforce catback.
@Blasterxp
3 жыл бұрын
Should be on the list of weightsaving!
4:20 Polo sedan? Misha thats a jetta 😁
Am I the only one who doesn't like the artificial pops and bangs? I recently watched a video from Throttle House comparing the new RS5 to the old one with the NA V8 and that sounded so much nicer. Not just because of the engine arrangement, but it was clean, just the revs going up and down.
@SH7SH7SH7
3 жыл бұрын
But an NA V8 with subtle pops and bangs would sound even better 😜
Love the confidence when said polo sedan lol
Can’t wait for these sort of vids with the Yaris great vid as always! 👌🏻🤟🏻
Anything you upload is brillaint. Love it as always😍😎
Parts and Dyno Time! I love it!
Loving the progress on this. 😀
It's so quiet... i feel like it sounded better with the stock one, maybe remove that pesky silencer?😇 Shhhhhh i will keep the secret
@9373innes
3 жыл бұрын
Defo
@MatthewCornish
3 жыл бұрын
I felt the same way
That is beautiful exhaust work.
Braaaaapapapaap Can’t wait to see it Sunday!
Great tech content, love the versatile nature of your vids, It would be sweet to see you lap some of our Aussie rigs in my part of the world, The Land of Oz
Liked the stock one better. If i wanna rent it than i would prefer pops and bangs as a customer. It makes experience more better and exciting.
Gooood morning Misha.. Upgraded the Cupra exhaust system hey? NiCE One bro, the cars got some extra grunt & abit of "Growl" to the engine sound!..I LiKE it ! Wonder what she produces when u rechip the motor? Is that next on the agenda? George is da BEST mate to have on a rebuild project..someone who dosnt bullshit & really knows his stuff= a COOL dude!! 👍👍🙂👍👍 Thanx for the update Misha. Lookin forward to seeing the finished project strut its thing onda track! LOVE Ya Work 💕 Godbless & hava g'day 🙂
Also engine and turbo response is enhanced by a less restrictive exhaust system. and i agree in not needing to remap/tune a customer/taxi car, along with the stock map already being so clean and efficient
I was pretty much bang on with my guess of 303.9 WHP figure 😎
How you’re vids started with them mad scooters 😂👌🏻
Very interesting to see the changes to the Cupra. Will the cage be the main thing that does stiffen the car or will there also be other things like welding or other struts?
pretty epic to see 325hp at the engine instead of 300 ! makes me want one even harder !
any relaability mods ? not sure about this engine but the 2015 S3/golf R and up had some bad timing problems because the tensionner was plastic and with heat cycling it becomes brittle and shatters causing a catastrohpic engine failure even on stock cars, there are some replacement parts made from billet aluminium to prevent the problem
It looks and sounds better, but I expected it to be a bit louder tbh. I know about the tuv, but didn't know that it was so strict regarding decibels.
Haha stuff has evolved in the scooter scene compared when we were riding scooters Misha :D
Really interesting to see from start to finish on how to build a renter ring taxi.
Maybe i am second(beside you Misha) about the performance of that drag Yamaha;)
Hey Misha, i‘m realy excited about whats happening to the cupra, you are doing it right 👌🏼! Is there a video upcoming about rims & tires? Original, due to the big Brembo brakes, the cupra is running on 19“ wheels. But your cupra & I think Thilos cupra are running on 18“ whells, i guess🤷🏼♂️ Can you compare the size and give some information about advantage & disadvantage of driving 18“ wheels? Thank you for the beautiful content 😊 keep going👋🏻
Good Sound 👌
Scooter is highlight of this vlog.
You went from 2 silencers to 3 silencers with the miltek, did you really expect a better sound?
A scooter next session ohh yea.. love the pops and bangs great sounding car :)
Great Vid 😎😎👍👍👍👍
Sounds nice
Statistically insignificant as it's not a guaranteed level playing field on different days. In general exhaust systems are a "supporting mod" you do ready for a new tune... it allows more flow of air. Mots modern sports cars have pretty good exhausts and most manufacturers don't waste power with a sub standard exhaust with the standard tune. I love Miltek tips and their lovery shiny mufflers.
Im a bit bemused. The OEM has two boxes, but the Miltek needs 3 to pass TUV?
It"s interesting to me how similar the underside of that car is to my MK1 Focus....odd. On another note ...are you using Thilo's car as a blueprint for your's?
Goodness, thought I'd started a Carwow video by mistake :P
Probably could have gotten away with the first middle resonator and not that huge extra thing by the rear wheel. Sounds quieter now haha.
I ran my gti mk7 with a cat back from milltek.. Few months later I went catless and straight pipe...+stage 2. The cold starts in the morning are an automatic smile guarantee!
Sounds like the whoosheyness of last gen Megane RS
Looks like the boot wasn't closed during the last sound check. That isn't the standard we're used to. Nice exhaust. Not to blame for modern engines lack of soul :)
4:21 That's a Jetta
@Tristan.R.J.M
3 жыл бұрын
No. Polo sedan haha My ears itched when he said that. Mindfuck right? Haha
Mil tech - Acrapowitch - Remus . what do you prefer?
Well I guess you guys have a deal with milltek and I'm not complaining about the video but I hope we can all agree that this mod doesn't give you the most bang for the buck. Getting a legal 200cpi catted downpipe will reduce backpressure drastically and also give you a better sound experience. Your comment about the loss of baxkpressure leading to less power also only applies to n/a engines since the turbo gives you enough backpressure. But the tips sure look a lot nicer and 90% of customers probably will consider that car to be better than a cupra with a stock exhaust just by the looks of it.
Call me crazy I liked stock better
Often when we fit aftermarket parts to vehicles like Exhausts & or intake mods you actually see a slight reduction in power because the operating conditions of the motor move to a different area in the ECU maps and retards the timing... yes remaps are essential when putting bolt ons on your engine
@AI-Records24
6 ай бұрын
On older cars yes, not on these newer ones Ecu is adaptive in a sense
I saw a bunch of these scooters in Florida.
well least you kept decent power, i've helped lots of friends fit aftermarket exhausts and seen up to 10BHP lost with some turbo cars as the ECU Detects a change and restricts the power like it thinks its running low-grade fuel.
"Pops and bangs...kinda douchey. " You captured it perfectly imo. Over the pond guys here are sacrificing performance and wear and tear, possible damage for all the pOpS aNd BaNgS. Haha
Sounds awesome!
Just wondering what the rules are in Germany around ‘high flow’ cats? Do you need to keep the stock cat or can you change to less restrictive cats?
@Florian1095
3 жыл бұрын
You can replace it, but it needs to be ECE certified. Companies like HJS offer sport cats (mostly 200/300 cell) which are allowed by Tüv for road use here in Germany
4:24 that's a Jetta man, it's the "golf sedan" not the polo sedan. Interestingly the gli has the same drivetrain as a golf gti.
Nothing can make EA888 sounds good.
4:20 US spec Jetta??
Back in the day we achieved a lot with stickers...😂 But, yes this unnecessary fake sound + the pops and bangs are quite juvenile. Each to their own, but stealth is my preference. That does not mean it's neutered.
Less hp..weird, I got more on mine. But my dyno guy also calculates hp after an average of 5-7 pulls, not from one..who pulls once IRL..? after 5-7 pulls the heat becomes a definitive factor and the OEM loose big hp after each pull since the turbo get so hot because of the restrictions in OEM exhaust. It gets hot with the milltek too but not even close to the OEM loss in numbers.. Nice vid Misha..hope you guys will enjoy the drone sound in the car at 130kmh😂😂😉
@Tristan.R.J.M
3 жыл бұрын
Huhu pulls
Miss the cupra 280 guerrilla exausth 😞
It actually sounded better before installing the new exhaust system
@astradala1845
7 ай бұрын
Couldn’t disagree more
4:23 I think it is a Jetta!
Nice to see George has finally started paying for a haircut rather than being tight and cutting it himself 😂😂
She can breathe better now ! Nice !
Stock sounds like boy racer ish, Milltek one sounds more grown up ish... if that make sense.
@stfu6397
3 жыл бұрын
Exactly
@ZLAKLR20B
3 жыл бұрын
You mean it now sounds like a standard boring old mans car lol
@devandrasimanjuntak1646
3 жыл бұрын
yeah, a 2.0L turbo 4 pumping out 300 hp is not impressive enough to demand pops and bangs. Maybe if it had 400 hp, sure, not 300 tho.
@RDSAlphard
3 жыл бұрын
@@ZLAKLR20B I don't mind that, when it's 300hp.
@RDSAlphard
3 жыл бұрын
@@devandrasimanjuntak1646 to me, even 500hp, I'd prefer no artificial pops & bangs.
5:00, what's with the metal banging sound from the M2?
@clemensoberzaucher1441
3 жыл бұрын
sounds like it's coming from the suspension to me
@mgcharoudin
3 жыл бұрын
Springs of suspension
@RDSAlphard
3 жыл бұрын
@@mgcharoudin I see! I didn't know they make such a sound!
I mean i was close with the crank horsepower guess. Damn British in me.
What do you think of e46 as project car?
@mgcharoudin
3 жыл бұрын
Any car is a great project car
I didn't know you worked for Rimac
I was so close think I was under 1bhp with my guess lol
Seit wann hat Miltek in Deutschland eine Genehmigung ?
What is that black smoke on 00:17
@mgcharoudin
3 жыл бұрын
Black magic
@ognjennikolic1384
3 жыл бұрын
@@mgcharoudin thats what i tought 😏
2jz?
That wooshing sound from the new exhaust, sounds quite restrictive. Seems a backwards step to go larger pipe, more mufflers, be quieter (due to more restrictive mufflers), likely heavier? and if anything, lose power. Would be interesting to see a comparison of it tuned with the factory exhaust, vs tuned with the new exhaust.
Do you mean the DSG pops when saying pops n' bangs?
@Tristan.R.J.M
3 жыл бұрын
Pop... fart.. potatoe potatoe
@ZanicL3
3 жыл бұрын
@@Tristan.R.J.M pitoe pitatoe potatoe
34mm op een 70 bwoah
RIMAC ON NURBURGRINGGGGGG
I cant remember ! Have you ever made comments on road racers. People driving hard outside The track. 😎 Dont be so mad Misha, it’s just a joke, you know for fun,. It is 2020 and ewery thing sucks, there are only The fun we make our self.
@Tristan.R.J.M
3 жыл бұрын
Speedlimit is 100km/h over there so 0-100 is ok, right?
It sounds better than a a45
You guy work at lightning speed. Others car influencers will take 1 week to choose the exhaust and 1 week to install it and still get some kind of problem so has to switch back to the old system
Such a pity because of the EU and TUV regulations. It's quieter with the Miltek exhaust than stock. I have the BullX resonated with rear silencers exhaust on my Cupra 280, also TUV approved and it's so silent that my friends ask me when will I get an exhaust, as they think it's stock because of how civilized it sounds haha
Good video
@MacheteK
3 жыл бұрын
Good comment
@Tristan.R.J.M
3 жыл бұрын
Good comment
Prefer the stock sound of the F Type V6S...
@jamiewilkinsracing
3 жыл бұрын
Yes! I always thought the V6S was a really underrated car for sound.
Knew my new 2020 290 was stronger than the claimed 286. Cupra🦾
Stock power - 303. License Plate - 303 ... now you have to change the license plate...
delete the middle resonator for better sound... it's only for the pre wltp cars... my golf r with opf it hasn't middle resonator....only has at the back because the two opf filters
After the turbo is just unnecessary weight and wasted money ! :D
Je oude scooterliefde wordt weer aangewakkerd! 16:27, rijden met de achterklep niet in het slot waardoor er meer geluid binnenkomt (en uitlaatgassen).
👍🤓👍.
218 to be replaced with 235? hmmmmm :)
@mgcharoudin
3 жыл бұрын
Bumper :)
Gg
Second
I wish it were a Polo Sedan instead of a Golf Sedan... Then my car would be smaller, lighter, and faster on track!!
Sounds like my stock MK5 GTi. Hahaha
@22Epic
3 жыл бұрын
Basically the same engine, so makes sense.
This "upgrade" it's not worth it at all for me. Even the sound is worst not to mention the lost of HP. Yea after remap it will have difference but it will have with the stock exhaust also. I hope that Milltek has sponsored that video. That's my 2cents about it.
AAAAAND ladys and Gent's Let me introduce: Another car which I want and can't afford 🥲 Like the video though
NO POPS AND BANGS! Best thing ever! Then you can still hear it all on the outside... SAD!
A Lot of money for fckin vakum cleaner sound.. milltek or stock its sounds fckin bad.. :D a full straight pipe the only way to make some nice sound.
My Remus sounds so much better ;-)
first
sounds the same, IMO it would be a total waste of time and money with those huge boxes
idk man my cat´s meow makes more noise
New exhaust is shit, no matter how you measure it, sozzer
Cars that fart all the time are for the weak.