Just a quick insight to Stage 2 tuning and the importance of correct tuning. 6 speed manual versions are rare!

@LC-vp6dz

4 жыл бұрын

What original clutch can take?

@FOM58

3 жыл бұрын

@@LC-vp6dz mine started slipping with 400nm lol

@Kenny.1979

3 жыл бұрын

@@FOM58 Manuals have soft clutches. Can start slipping running stock power. Best first mod you can do to this is buy an uprated clutch.

@massimoparente9331

3 жыл бұрын

Intercooler litri? Grazie

@cryptowheels677

2 жыл бұрын

I've just brought a manual version myself 🎉🎉

Great vid, man knows his stuff 👌. Love the Cupra

Not one to normally like exhaust notes but that sounds sick. Great informative video aswell. Definitely use your services when the time comes!

Very informative no waffle keep it going lads!

Very informative video; thanks guys!

really enjoyed that very informative and interesting

when i get my cupra im defo bringing down here

badass car its my favorite

Do you check for the play in the turbo shaft on these IS38 turbos?

Great video guys, I have a My19 290 is there option to get rid of the GPF filter yet.

@NVMotorsportUK

4 жыл бұрын

Yes

Hi guys, im looking at one very soon and just wondered what the safe limits are on these engines when it comes to tuning

Epic video - car sounds amazing and wish you guys were closer to me. Forge blow off valve also? Do you find any issues with these when tuning with DSG and shift lag?

@NVMotorsportUK

4 жыл бұрын

Yes forge vta recirc valve. We based our tuning on over 1000hours with our own demo car 5 years ago. 90% of cars we do are the DSG variant without concerns.

@philipbeart8387

4 жыл бұрын

NV Motorsport UK sorry, I meant DSG shifts with the Forge valve...I know you guys know your Cupras. I ended up pulling my Forge BV off cos it just felt it lagged the shifts a bit but maybe it was the map I was with (Revo)! Should’ve come to you guys! Really good vid. 👍🏼

@NVMotorsportUK

4 жыл бұрын

@@philipbeart8387 there is actually a calibration table for throttle and diverter behaviour on shift. Other option is to lower torque reduction between shifts.

@philipbeart8387

4 жыл бұрын

NV Motorsport UK I took it off and swapped to the Turbosmart Dual Port direct plug in valve and it’s seems to have resolved itself...but I def need to get the car to you guys for some TLC. 👍🏼 Cheers!

Super like 😀👍

Great educational video.. sub

Nice video thanks !!! Is it Turbo Surge between 11:43 - 11:47?

@NVMotorsportUK

4 жыл бұрын

Not surge as such.. more wastegate control

Are you also giving that much boost when running custom map 6 on jb4? What fuel? Cheers

@NVMotorsportUK

4 жыл бұрын

No and 99ron

@Vitoisr

4 жыл бұрын

@@NVMotorsportUK thanks for the quick reply. What's the reason? Too much timing?

Nice car. What air filter is it running?

Great video mate, didn't mention about how shit the stock clutch is and what you changed it for to run at stage 2 or even stage one, maybe a mention to people who want to get to achieve this as its one of the biggest and most exspensive mods on a manual cupra, i know as i have a stage 2 cupra and wasnt cheap to get there 👍

@NVMotorsportUK

4 жыл бұрын

Karl. Thanks. Links are in description for parts available for this.

@karlgallagher1320

4 жыл бұрын

@@NVMotorsportUK nice one mate

@formentorvz5

4 жыл бұрын

Has the clutch feel improved with the Sachs clutch upgrade?

Would I see a close power figure to this with the stock cat back, currently have intake with turbo elbow,decat and double res delete but looking to get a intercooler soon and get it mapped

@NVMotorsportUK

7 ай бұрын

A true 76mm exhaust is what allows for the 400 figure.. anything less than that Bore will compromise output

@Ben-jm8hi

7 ай бұрын

@@NVMotorsportUK okay Thankyou, been running a decat for awhile now and have had cars in the past with a decat and no software upgrade, how safe is it until I get it remapped, cheers

@NVMotorsportUK

7 ай бұрын

@Ben-jm8hi very unsafe on is38 cars as covered a million times in our shorts section

@Ben-jm8hi

7 ай бұрын

@@NVMotorsportUK could I get it remapped with the stock clutch for the time being, it got a brand new clutch fitted under warranty, maybe if the torque was capped, would the power still be the same for a stage 1?

@NVMotorsportUK

7 ай бұрын

@Ben-jm8hi yes we can add torque limiters

Hello, the internals are the same as the one with 230hp????

@NVMotorsportUK

4 жыл бұрын

No

@diogojustino5293

4 жыл бұрын

@@NVMotorsportUK thanks a lot bro

Can the stock turbo handle the power?

@NVMotorsportUK

3 жыл бұрын

This is repeatable and well developed over 6 years. A healthy turbo is key..🙏

what tourqe can the STOCK manual clutch handle? and do you offer a custom tune with like 330hp and 295ftlbs if possible?

se saben los caballon porque lo.pone en la entrada del video

do you guys never use the BCS exhausts?

@NVMotorsportUK

4 жыл бұрын

Never

@user-ox4eu3xi3s

4 жыл бұрын

@@NVMotorsportUK interesting, how come? VAG cars love them as does another highly liked tuner also like them

@NVMotorsportUK

4 жыл бұрын

@@user-ox4eu3xi3s have you pulled an 02 sensor out after a few miles?

@user-ox4eu3xi3s

4 жыл бұрын

@@NVMotorsportUK i don't own a BCS exhaust, what is wrong with them? i only have a a mk1 cupra r which im more than happy with for now with a cheap powerflow exhaust which i aint to keen on tho.

@rn470

4 жыл бұрын

@@NVMotorsportUK I own a BCS exhaust, could you shed some more light? Thank you

What's the program you use to edit the ECU bin file?

@level5822

4 жыл бұрын

And also how do you log like that

how much would something like that typically cost?

@NVMotorsportUK

4 жыл бұрын

Please click www.nvmotorsport.com/contact-us

Is the manual more reliable than dsg?

What about the clutch being a 6 speed manual holding that power?

@NVMotorsportUK

4 жыл бұрын

Have you watched the vlog? We did say its got an upgraded clutch with a 600nm limit

@dominiccooper7944

3 жыл бұрын

@@NVMotorsportUK which clutch did you use? I'm running stage one at 354bhp and 460nm on standard clutch which is struggling. Any advice is much appreciated.

@NVMotorsportUK

3 жыл бұрын

Sachs paddle is the best in our opinion.

@cupraaron

Жыл бұрын

@@dominiccooper7944 Hey mate, im with a 6-speed Cupra aswell and considering a stage 1. How did your clutch hold up to the tune? Anything happened since then? Thanks!

@theofficialrm9713

17 күн бұрын

@@cupraaron hi mate i am picking up a cupra 280 over the weekend how did yours handle? did you upgrade the clutch ?

Is it a stock IS38? What is the article number? I have a 280hp Cupra DSG, and i am afraid that it will blow after a remap..

@keironj199

2 жыл бұрын

Just send it and replace it if it goes

@cupra2Jock.

Жыл бұрын

@@keironj199 🤣

ciuning

What is the name of color?

@keironj199

2 жыл бұрын

Monsoon grey by looks of it

EGT temperature ?

Turn down the volume