Very thankful for this video because the instructions aren't great. This made it so easy! Don't forget to change the master code too.
@OGSadPenguin Жыл бұрын
I just bought my first home and you made one of my hundred jobs just that much easier. Thank you for explaining everything so clearly. Great video!
@KingTruthSeeker744 ай бұрын
I ❤ the way you were very informative and to the point, but in a understandable way. Thank You very much Sir..!!! God Bless You
@305Spartin Жыл бұрын
This video actually made sense and it took me 20 seconds to program the dang thing! Thank you so much!
@suezeeq123 жыл бұрын
Thank you for the easy instructions - took me about 5 minutes because of this!
@matthewgillingham8828
2 жыл бұрын
Can rely on manufacturers instruction unless you can read Spanish or french ... This coming from a guy that usually doesn't even read distructions
@bennosblogandmore97237 ай бұрын
Thanks to your instructions I was able to reprogram my code (couldn't figure out that "10" meant type in the number 10) 😅
@CleanGroutNW3 жыл бұрын
just bought this and about to install. thanks for the video.
@vik56in2 жыл бұрын
This is a genius video. So easy to understand.
@Nicks_Kicks_and_Buckets
10 ай бұрын
P
@salviador3 ай бұрын
SHORT AND SWEET! Thanks!!
@zipsathelionАй бұрын
Thank you , God bless.
@solnamoosong Жыл бұрын
Thank you so much! I couldn’t done it with out this video!
@ZeusiesZoo10 ай бұрын
I did it!!! Yay! U could seriously use a cpl extra steps but we both now have electric locks. Yay!!!!
@shyam_Tang64445 ай бұрын
This video was helpful .. thankyou 👍
@J.AYDEN_3 жыл бұрын
Great 👍🏿
@Fajah692 жыл бұрын
Dang those yellow batteries that comes free with Chinazon items.
@jaimeguerrero31392 жыл бұрын
Awesome. Tanks
@challzbrown3 жыл бұрын
Super easy, thank you!
@Jinan_Shah2 жыл бұрын
I have a door open from the other side(reverse). When I put the back plate, it doesn’t lock all the way!! I didn’t put battery and master code. My assumption was if I can’t do it by hand, it would not work with keypad. Should I have continued? How would this work?
@justinlocke2 жыл бұрын
excellent video, but if i may be so bold, be aware of the "backset" distance-- (backset is distance from edge of door to the center of keyway, and can be either 2- 3/8" or 2-3/4") you may need to twist the latch 180 degrees to lengthen it.
@LarryVitas2 жыл бұрын
Does this lock do well in the rain?
@reubenpaul116 ай бұрын
I'm stuck at 44 seconds part. The 2 big screws dont go fully inside from the back. They are stuck at halfway and so the outer fingerprint side of the case is totally loose. What's the catch.
@alexander96062 жыл бұрын
Could you share the brand name of this lock? I would like to buy it on Amazon. Thank you
@letiziapassanisi99672 жыл бұрын
Hi! Great video, Thanks! So I installed a similar one. W/a flat numeric touchpad. I followed the same instructions as this one, and it was going great. However, after it went through its series of reboot, I took the wire out (can’t even remember why) @ part (1:40-in your video) once I reinserted the wire, the touchpad wouldn’t go through the automatic reboot series again…and the touchpad isn’t making any noise or showing any lights🤷🏼♀️ I’m going bananas. lol Tried back reset button, took batteries out/in, and nuttin.🤦🏼♀️ Any idea where I went wrong? Or what I can try to set it up, get it functional? Thanks! 🙏🏼🙏🏼🙏🏼
@patriciapatricia2760
Жыл бұрын
did you ever solved it?
@james13i6 ай бұрын
0:18 Hm my flat blade is on a 45 degree angle. Is there anything I can do about it or it’s just a faulty product?
@tjmooney41816 ай бұрын
Great video thanks a lot, happy holidays. Buy some bitcoin 😎
@junemueller5650 Жыл бұрын
How do you set code
@Pengy80273 жыл бұрын
What do you do if the lock goes to the left and to unlock also goes to the left?
@rodneychu2822
2 жыл бұрын
I am currently having that issue. Took it apart multiple times i can't figure it out. Its works manually but electronics keeps going to the left to lock.
@annettejsavell68423 жыл бұрын
Have a lock that I took off the door to paint now that I am ready to I stall again can not get the lock to lock the dead bolt tries to turn the wrong way,I have tried everything and even watched your video,and still cannot get it to work. Help
@armandotorres9776
3 жыл бұрын
Same here 😅 exactly the same thing happened to me it opens with the lock button and locks with code
@602musik190
3 жыл бұрын
Is yours also a deadbolt electronics LOCK? if yes take out a 🔋 for ten seconds or more before you put it back press the reset button and dont let go keep pressing as you put back the 🔋 the lock should turn green press the lock again and it should work normal your lock is reset to factory settings and the code is the default code
@elmore119 Жыл бұрын
How good are the Harbor freight batteries😂
@bigtiger95234 ай бұрын
yes helpful but you could have pointed the camera towards the keys so idiots like me can actually see what's being done...
@fredteixeira36042 ай бұрын
Add user doesn't work. Beeps for long time. Really bad
Пікірлер: 38
Very thankful for this video because the instructions aren't great. This made it so easy! Don't forget to change the master code too.
I just bought my first home and you made one of my hundred jobs just that much easier. Thank you for explaining everything so clearly. Great video!
I ❤ the way you were very informative and to the point, but in a understandable way. Thank You very much Sir..!!! God Bless You
This video actually made sense and it took me 20 seconds to program the dang thing! Thank you so much!
Thank you for the easy instructions - took me about 5 minutes because of this!
@matthewgillingham8828
2 жыл бұрын
Can rely on manufacturers instruction unless you can read Spanish or french ... This coming from a guy that usually doesn't even read distructions
Thanks to your instructions I was able to reprogram my code (couldn't figure out that "10" meant type in the number 10) 😅
just bought this and about to install. thanks for the video.
This is a genius video. So easy to understand.
@Nicks_Kicks_and_Buckets
10 ай бұрын
P
SHORT AND SWEET! Thanks!!
Thank you , God bless.
Thank you so much! I couldn’t done it with out this video!
I did it!!! Yay! U could seriously use a cpl extra steps but we both now have electric locks. Yay!!!!
This video was helpful .. thankyou 👍
Great 👍🏿
Dang those yellow batteries that comes free with Chinazon items.
Awesome. Tanks
Super easy, thank you!
I have a door open from the other side(reverse). When I put the back plate, it doesn’t lock all the way!! I didn’t put battery and master code. My assumption was if I can’t do it by hand, it would not work with keypad. Should I have continued? How would this work?
excellent video, but if i may be so bold, be aware of the "backset" distance-- (backset is distance from edge of door to the center of keyway, and can be either 2- 3/8" or 2-3/4") you may need to twist the latch 180 degrees to lengthen it.
Does this lock do well in the rain?
I'm stuck at 44 seconds part. The 2 big screws dont go fully inside from the back. They are stuck at halfway and so the outer fingerprint side of the case is totally loose. What's the catch.
Could you share the brand name of this lock? I would like to buy it on Amazon. Thank you
Hi! Great video, Thanks! So I installed a similar one. W/a flat numeric touchpad. I followed the same instructions as this one, and it was going great. However, after it went through its series of reboot, I took the wire out (can’t even remember why) @ part (1:40-in your video) once I reinserted the wire, the touchpad wouldn’t go through the automatic reboot series again…and the touchpad isn’t making any noise or showing any lights🤷🏼♀️ I’m going bananas. lol Tried back reset button, took batteries out/in, and nuttin.🤦🏼♀️ Any idea where I went wrong? Or what I can try to set it up, get it functional? Thanks! 🙏🏼🙏🏼🙏🏼
@patriciapatricia2760
Жыл бұрын
did you ever solved it?
0:18 Hm my flat blade is on a 45 degree angle. Is there anything I can do about it or it’s just a faulty product?
Great video thanks a lot, happy holidays. Buy some bitcoin 😎
How do you set code
What do you do if the lock goes to the left and to unlock also goes to the left?
@rodneychu2822
2 жыл бұрын
I am currently having that issue. Took it apart multiple times i can't figure it out. Its works manually but electronics keeps going to the left to lock.
Have a lock that I took off the door to paint now that I am ready to I stall again can not get the lock to lock the dead bolt tries to turn the wrong way,I have tried everything and even watched your video,and still cannot get it to work. Help
@armandotorres9776
3 жыл бұрын
Same here 😅 exactly the same thing happened to me it opens with the lock button and locks with code
@602musik190
3 жыл бұрын
Is yours also a deadbolt electronics LOCK? if yes take out a 🔋 for ten seconds or more before you put it back press the reset button and dont let go keep pressing as you put back the 🔋 the lock should turn green press the lock again and it should work normal your lock is reset to factory settings and the code is the default code
How good are the Harbor freight batteries😂
yes helpful but you could have pointed the camera towards the keys so idiots like me can actually see what's being done...
Add user doesn't work. Beeps for long time. Really bad